HSVA/HSVAU
SERIES
AXIAL / VERTICAL MOUNTING
WIRE WOUND RESISTORS
CERAMIC ENCASED TYPE
Profile Dimensions
SV4A/SV4AU, SV5A/SV5AU
& SV7BA/SV7BAU
1.1
8+1
2.4
7+1
0.7+0.1
SV7A/SV7AU, SV9A/SV9AU,
SV11A/SV11AU & SV17A/SV17AU
9+1
0.7+0.1
10+1
1.6
2.6
HTR
TYPE POWER
RATING
at 70°C L
(+1.5)
L2
(+3.0)
TYPICAL
WT.
PER PC
(gms)
L1
(+3.0)
SV4A 4W 20.0 35.0 35.0 40 R04 11K 2.3
SV4AU 4W 20.0 32.0 56.5 40 R04 11K 2.4
SV5A 5W 25.0 35.0 35.0 45 R05 16K 2.8
SV5AU 5W 25.0 32.0 61.5 45 R05 16K 2.9
SV7A 7W 25.0 35.0 35.0 45 R05 16K 5.0
SV7AU 7W 25.0 32.0 64.0 45 R05 16K 5.1
SV7BA 7W 38.0 35.0 35.0 60 R10 33K 4.9
SV11A 11W 50.0 35.0 35.0 70 R10 47K 10.2
SV17A 17W 75.0 35.0 35.0 95 R10 70K 13.8
SV7BAU 7W 38.0 32.0 74.0 60 R10 33K 5.0
SV9A 9W 38.0 35.0 35.0 60 R10 33K 7.8
SV9AU 9W 38.0 32.0 77.0 60 R10 33K 7.9
SV11AU 11W 50.0 32.0 87.0 70 R10 47K 10.35
SV17AU 17W 75.0 32.0 111.5 95 R10 70K 14.0
LM
+1
For resistance values less than R10 and tolerance less than +2% please
measure resistance over centered length LM.
Ceramic Type
DIMENSIONS (mm) RESISTANCE
RANGE
min max
4 W to 17 W
R 04 to 70 K
Fire Proof
Ceramic Housing
Alloy Wire Wound
Element On Heat
Conducting Ceramic /
Fibre Glass Substrate
Quartz Silica
Powder
Mechanically Crimped
Termination Assembly
TM
PHYSICAL CONFIGURATION
HSVA/HSVAU SERIES
The HSVAU series has been
developed in response to the
needs of our stockists for a dual
purpose resistor -axial
mounting and vertical mounting
when the longer lead L2 is
folded over .
L1L
0.8mm LM
L2
6mm, reduced solderability in this area
ELECTRICAL AND ENVIRONMENTAL CHARACTERISTICS / DATA
TYPICAL APPLICATIONS
ORDERING INFORMATION
HSVA/HSVAU
TOLERANCE
RESISTANCE VALUE
HTR TYPE
SERIES
HSVA/HSVAU 4R7 KSV9A/SV9AU
DERATING CURVE
Ambient temperature [ C]°
Rated dissipation [%]
40
80
100
120
040 80 120 160 200 240 275
70 C°
WIRE WOUND RESISTORS
CERAMIC ENCASED TYPE
The HSV A Series enjoys a wide market in TV, power supply and industrial electronics field.
Depending upon the resistance value and application the resistor core may be fibreglass or ceramic.
These resistors also available for use in pulse applications. For further information please refer to
In case a tailor-made pulse resistor is required, please refer to
and provide data accordingly .
The HSV AU Series are very popular with stockists as they are capable of dual mounting - axial or vertical hence
are instrumental in reducing inventory .
“Understanding pulse & over load capability of wire wound resistors”. “Questionnaire of data required from
customers”
TM
Performance Requirements
Test
Resistance tolerance + 10% [K]; + 5% [J]; + 3% [H];
+2% [G]; +1% [F]
Rated ambient temperature at 70°C full power dissipation
[see derating curve]
Voltage rating V= PxR
Insulation resistance > 1000 M [minimum]
Temperature co-efficient +40 to +150 ppm/ C
[medium and high values]
+450 to 500 ppm/ C
[low and very low values]
Short time overload Max ∆ R+[2% + R05]
Moisture resistance Max ∆ R+[3% + R05]
Load life Max ∆ R+[3% + R05] average
Ambient operating -40 C to +155 C
temperature range
Flame test UL Specifications have been
met satisfactorily.
°
+°
°°
Note : Due to recent technological advances, the ceramic cases used may be steatite ceramic or corderite
ceramic or high alumina ceramic depending on the nature of application. Hence the ceramic cases
may be off-white or variations of brown and variations of grey; colours which are inherent to these
ceramic materials.
In case Pulse type is required please suffix HTR T ype with ‘I’, eg. SV-5AI.
