1
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
Surface Mount Aluminum Electrolytic Capacitors NACK Series
FEATURES
• CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING
• VERY LOW IMPEDANCE (Up to 60% lower than NACZ)
• WIDE TEMPERATURE RANGE (-55 +105OC)
• REDUCED SIZE (Up to 50% smaller than NACZ)
• DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
• MEETS THE REQUIREMENTS OF AEC-Q200*
*Contact NIC for supporting test data
CHARACTERISTICS
Rated Voltage Range 6.3 ~ 100Vdc
Rated Capactance Range 3.3 ~ 6,800μF
Operating Temperature Range -55°C ~ +105°C
Capacitance Tolerance ±20%(M)
Maximum Leakage Current
after 2 minutes @ 20°C 0.01CV or 3μA, whichever is greater
Maximum Tanδ @ 120Hz/20°C
W.V. (Vdc) 6.3 10 16 25 35 50 63 80 100
S.V. (Vdc) 8.0 13 20 32 44 63 79 100 125
All Case Sizes
C ≤ 1,000μF 0.26 0.19 0.16 0.14 0.12 0.10 0.08 0.08 0.07
C = 2,200μF - 0.21 - 0.16 - - - - -
C = 3,300μF 0.30 - 0.20 0.18 - - - - -
C = 4,700μF - 0.25 0.22 - - - - - -
C = 6,800μF 0.36 0.29 - - - - - - -
Low Temperature Stability
Impedance Ratio @ 120Hz
Z -25°C/Z +20°C 2 2 2 2 2 2 2 2 2
Z -40°C/Z +20°C 3 3 3 3 3 3 3 3 3
Z -55°C/Z +20°C 4 4 4 3 3 3 3 3 3
Load Life Test @ 105°C
4 ~ 10mm Dia. 2,000 Hours
8x10.5mm 5,000 (Opt.)
10x10.5mm 5,000 (Opt.)
12.5 ~ 18mm Dia. 5,000 Hours
Capacitance Change Within ±30% of initial measured value
TanδLess than 200% of specifi ed maximum value
Leakage Current Less than specifi ed maximum value
NACK rev. 1 05212007
STANDARD PRODUCT AND CASE SIZE Dφ xL (mm)
Cap (μF) Code Working Voltage (Vdc)
6.3 10 16 25 35 50 63 80 100
3.3 3R3 - - - - - - - 5x6.1 -
4.7 4R7 - - - - 4x6.1 4x6.1 5x6.1 6.3x6.1 -
10 100 - - 4x6.1 4x6.1 4x6.1 5x6.1 6.3x6.1 6.3x8 -
5x6.1 6.3x6.1 8x6.5
22 220 4x6.1 4x6.1 4x6.1 5x6.1 5x6.1 6.3x6.1 6.3x8 8x10.5 8x10.5
5x6.1 8x6.5
33 330 - 4x6.1 -5x6.1 6.3x1 6.3x8 8x10.5 8x10.5 10x10.5
5x6.1 6.3x6.1 8x6.5
47 470 4x6.1 -5x6.1 6.3x6.1 6.3x6.1 6.3x8 8x10.5 10x10.5 12.5x14
5x6.1 6.3x6.1 8x6.5
68 680 - - 6.3x6.1 6.3x6.1 6.3x8 - 8x10.5 12.5x14 12.5x14
100 101 5x6.1 - 6.3x6.1 6.3x8 6.3x8 8x10.5 10x10.5 12.5x14 16x17
6.3x6.1 8x6.5 8x10.5
150 151 - 6.3x6.1 6.3x8 8x10.5 8x10.5 10x10.5 12.5x14 12.5x14 16x17
220 221 6.3x6.1 6.3x8 6.3x8 8x10.5 8x10.5 10x10.5 12.5x14 - 18x17
8x6.5 8x6.5
330 331 6.3x8 8x10.5 8x10.5 8x10.5 10x10.5 12.5x14 - 16x17 18x17
8x6.5
390 391 - - - - - 12.5x14 - -
470 471 8x10.5 8x10.5 8x10.5 10x10.5 12.5x14 16x17 16x17 18x17 -
560 561 - - - - - 16x17 - - -
680 681 - 8x10.5 10x10.5 - 12.5x14 16x17 18x17 - -
1000 102 8x10.5 10x10.5 - 12.5x14 16x17 16x17 - - -
1500 152 10x10.5 - 12.5x14 16x17 16x17 - - - -
2200 222 - 12.5x14 - 16x17 - - - - -
3300 332 12.5x14 - 16x17 18x17 - - - - -
4700 472 - 16x17 18x17 - - - - - -
6800 682 16x17 18x17 - - - - - - -
*See Part Number System for Details
PNbS fDil
RoHS
Compliant
includes all homogeneous materials
See NAZT for
New Designs
Available in "Y" Control Option (for Automotive Equipment)
2NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
Surface Mount Aluminum Electrolytic Capacitors NACK Series
NIC Part Number* Cap.
(μF)
W.V.
(Vdc)
Dissipaton Factor
(Tan δ)
Max. Ripple Current (mA)
+105°C/100KHz
Max. Impedance (Ω)
+20°C/100KHz
Load Life Hours
@ +105°C
NACK220M6.3V4x6.1TR13F 22
6.3
0.26 90 1.35 2,000
NACK470M6.3V4x6.1TR13F 47 0.26 90 1.35 2,000
NACK470M6.3V5x6.1TR13F 0.26 160 0.70 2,000
NACK101M6.3V5x6.1TR13F 100 0.26 160 0.70 2,000
NACK101M6.3V6.3x6.1TR13F 0.26 240 0.36 2,000
NACK221M6.3V6.3x6.1TR13F 220 0.26 240 0.36 2,000
NACK331M6.3V6.3x8TR13F 330 0.26 280 0.34 2,000
NACK331M6.3V8x6.5TR13F 0.26 300 0.26 2,000
NACK471M6.3V8x10.5TR13F 470 0.26 600 0.16 2,000
NACK471M6.3V8x10.5TR13EF 470 0.26 600 0.16 5,000
NACK102M6.3V8x10.5TR13F 1000 0.26 600 0.16 2,000
NACK102M6.3V8x10.5TR13EF 1000 0.26 600 0.16 5,000
NACK152M6.3V10x10.5TR13F 1500 0.28 850 0.08 2,000
NACK152M6.3V10x10.5TR13EF 1500 0.28 850 0.08 5,000
NACK332M6.3V12.5x14TR13F 3300 0.30 1100 0.06 5,000
NACK682M6.3V16x17TR15F 6800 0.36 1800 0.035 5,000
NACK220M10V4x6.1TR13F 22
10
0.19 90 1.35 2,000
NACK330M10V4x6.1TR13F 33 0.19 90 1.35 2,000
NACK330M10V5x6.1TR13F 0.19 160 0.70 2,000
NACK151M10V6.3x6.1TR13F 150 0.19 240 0.36 2,000
NACK221M10V6.3x8TR13F 220 0.19 160 0.34 2,000
NACK221M10V8x6.5TR13F 0.19 300 0.26 2,000
NACK331M10V8x10.5TR13F 330 0.19 600 0.16 2,000
NACK331M10V8x10.5TR13EF 330 0.19 600 0.16 5,000
NACK471M10V8x10.5TR13F 470 0.19 600 0.16 2,000
NACK471M10V8x10.5TR13EF 470 0.19 600 0.16 5,000
NACK681M10V8x10.5TR13F 680 0.19 600 0.16 2,000
NACK681M10V8x10.5TR13EF 680 0.19 600 0.16 5,000
NACK102M10V10x10.5TR13F 1000 0.19 850 0.08 2,000
NACK102M10V10x10.5TR13EF 1000 0.19 850 0.08 5,000
NACK222M10V12.5x14TR13F 2200 0.21 1100 0.06 5,000
NACK472M10V16x17TR15F 4700 0.25 1800 0.035 5,000
NACK682M10V18x17TR13F 6800 0.29 2060 0.033 5,000
NACK100M16V4x6.1TR13F 10
16
0.16 90 1.35 2,000
NACK220M16V4x6.1TR13F 22 0.16 90 1.35 2,000
NACK220M16V5x6.1TR13F 0.16 160 0.70 2,000
NACK470M16V5x6.1TR13F 47 0.16 160 0.70 2,000
NACK470M16V6.3x6.1TR13F 0.16 240 0.36 2,000
NACK680M16V6.3x6.1TR13F 68 0.16 240 0.36 2,000
NACK101M16V6.3x6.1TR13F 100 0.16 240 0.36 2,000
NACK151M16V6.3x8TR13F 150 0.16 280 0.34 2,000
NACK221M16V6.3x8TR13F 220 0.16 280 0.34 2,000
NACK221M16V8x6.5TR13F 0.16 300 0.26 2,000
NACK331M16V8x10.5TR13F 330 0.16 600 0.16 2,000
NACK331M16V8x10.5TR13EF 330 0.16 600 0.16 5,000
NACK471M16V8x10.5TR13F 470 0.16 600 0.16 2,000
NACK471M16V8x10.5TR13EF470 0.16 600 0.16 5,000
NACK681M16V10x10.5TR13F 680 0.16 850 0.08 2,000
NACK681M16V10x10.5TR13EF 680 0.16 850 0.08 5,000
NACK152M16V12.5x14TR15F 1500 0.18 1100 0.06 5,000
NACK332M16V16x17TR15F 3300 0.20 1800 0.035 5,000
NACK472M16V18x17TR13F 4700 0.22 2060 0.033 5,000
NACK100M25V4x6.1TR13F 10
25
0.14 90 1.35 2,000
NACK220M25V5x6.1TR13F 22 0.14 160 0.70 2,000
NACK330M25V5x6.1TR13F 33 0.14 160 0.70 2,000
NACK330M25V6.3x6.1TR13F 0.14 240 0.36 2,000
NACK470M25V6.3x6.1TR13F 47 0.14 240 0.36 2,000
NACK680M25V6.3x6.1TR13F 68 0.14 240 0.36 2,000
NACK101M25V6.3x8TR13F 100 0.14 280 0.34 2,000
STANDARD VALUES, CASE SIZES AND SPECIFICATIONS
*See part numbering system for how to denote WT termination style
Available in "Y" Control Option (for Automotive Equipment)
3
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
Surface Mount Aluminum Electrolytic Capacitors NACK Series
NIC Part Number* Cap.
(μF)
W.V.
(Vdc)
Dissipaton Factor
(Tan δ)
Max. Ripple Current (mA)
+105°C/100KHz
Max. Impedance (Ω)
+20°C/100KHz
Load Life Hours
@ +105°C
NACK101M25V8x6.5TR13F 100
25
0.14 300 0.26 2,000
NACK151M25V8x10.5TR13F 150 0.14 600 0.16 2,000
NACK151M25V8x10.5TR13EF 150 0.14 600 0.16 5,000
NACK221M25V8x10.5TR13F 220 0.14 600 0.16 2,000
NACK221M25V8x10.5TR13EF 220 0.14 600 0.16 5,000
NACK331M25V8x10.5TR13F 330 0.14 600 0.16 2,000
NACK331M25V8x10.5TR13EF 330 0.14 600 0.16 5,000
NACK471M25V10x10.5TR13F 470 0.14 850 0.08 2,000
NACK471M25V10x10.5TR13EF 470 0.14 850 0.08 5,000
NACK102M25V12.5x14TR15F 1000 0.14 1100 0.06 5,000
NACK152M25V16X17TR13F 1500 0.16 1800 0.035 5,000
NACK222M25V16x17TR15F 2200 0.16 1800 0.035 5,000
NACK332M25V18x17TR13F 3300 0.18 1800 0.033 5,000
NACK4R7M35V4x6.1TR13F 4.7
35
0.12 90 1.35 2,000
NACK100M35V4x6.1TR13F 10 0.12 90 1.35 2,000
NACK100M35V5x6.1TR13F 0.12 160 0.70 2,000
NACK220M35V5x6.1TR13F 22 0.12 160 0.70 2,000
NACK330M35V6.3x1TR13F 33 0.12 240 0.36 2,000
NACK470M35V6.3x6.1TR13F 47 0.12 240 0.36 2,000
NACK680M35V6.3x8TR13F 68 0.12 280 0.34 2,000
NACK101M35V6.3x8TR13F 100 0.12 280 0.34 2,000
NACK101M35V8x10.5TR13F 0.12 600 0.16 2,000
NACK101M35V8x10.5TR13EF 100 0.12 600 0.16 5,000
NACK151M35V8x10.5TR13F 150 0.12 600 0.16 2,000
NACK151M35V8x10.5TR13EF 150 0.12 600 0.16 5,000
NACK221M35V8x10.5TR13F 220 0.12 600 0.16 2,000
NACK221M35V8x10.5TR13EF 220 0.12 600 0.16 5,000
NACK331M35V10x10.5TR13F 330 0.12 850 0.08 2,000
NACK331M35V10x10.5TR13EF 330 0.12 850 0.08 5,000
NACK471M35V12.5x14TR15F 470 0.12 1100 0.06 5,000
NACK681M35V12.5x14TR15F 680 0.12 1100 0.06 5,000
NACK102M35V16x17TR15F 1000 0.12 1800 0.035 5,000
NACK152M35V16x17TR15F 1500 0.12 1800 0.035 5,000
NACK4R7M50V4x6.1TR13F 4.7
50
0.10 60 2.9 2,000
NACK100M50V5x6.1TR13F 10 0.10 85 1.52 2,000
NACK100M50V6.3x6.1TR13F 0.10 165 0.88 2,000
NACK220M50V6.3x6.1TR13F 22 0.10 165 0.88 2,000
NACK330M50V6.3x8TR13F 33 0.10 195 0.68 2,000
NACK330M50V8x6.5TR13F 0.10 195 0.68 2,000
NACK470M50V6.3x8TR13F 47 0.10 195 0.68 2,000
NACK470M50V8x6.5TR13F 0.10 195 0.68 2,000
NACK101M50V8x10.5TR13F 100 0.10 350 0.34 2,000
NACK101M50V8x10.5TR13EF 100 0.10 350 0.34 5,000
NACK151M50V10x10.5TR13F 150 0.10 670 0.18 2,000
NACK151M50V10x10.5TR13EF150 0.10 670 0.18 5,000
NACK221M50V10x10.5TR13F 220 0.10 670 0.18 2,000
NACK221M50V10x10.5TR13EF 220 0.10 670 0.18 5,000
NACK331M50V12.5x14TR15F 330 0.10 900 0.12 5,000
NACK391M50V12.5X14TR13F 390 0.10 900 0.12 5,000
NACK471M50V16x17TR15F 470 0.10 1610 0.073 5,000
NACK561M50V16x17TR13F 560 0.10 1610 0.073 5,000
NACK681M50V16x17TR15F 680 0.10 1610 0.073 5,000
NACK102M50V16x17TR15F 1000 0.10 1610 0.073 5,000
NACK4R7M63V5x6.1TR13F 4.7
63
0.08 50 3.0 2,000
NACK100M63V6.3x6.1TR13F 10 0.08 80 1.5 2,000
NACK220M63V6.3x8TR13F 22 0.08 120 1.2 2,000
NACK220M63V8x6.5TR13F 0.08 120 1.2 2,000
NACK330M63V8x10.5TR13F 33 0.08 250 0.65 2,000
NACK470M63V8x10.5TR13F 47 0.08 250 0.65 2,000
STANDARD VALUES, CASE SIZES AND SPECIFICATIONS
*See part numbering system for how to denote WT termination style
Available in "Y" Control Option (for Automotive Equipment)
4NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
NIC Part Number* Cap.
(μF)
W.V.
(Vdc)
Dissipaton Factor
(Tan δ)
Max. Ripple Current (mA)
+105°C/100KHz
Max. Impedance (Ω)
+20°C/100KHz
Load Life Hours
@ +105°C
NACK680M63V8x10.5TR13F 68
63
0.08 250 0.65 2,000
NACK101M63V10x10.5TR13F 100 0.08 400 0.35 2,000
NACK151M63V12.5x14TR13F 150 0.08 800 0.16 5,000
NACK221M63V12.5x14TR13F 220 0.08 800 0.16 5,000
NACK471M63V16x17TR15F 470 0.08 1410 0.082 5,000
NACK681M63V18x17TR13F 680 0.08 1690 0.08 5,000
NACK3R3M80V5x6.1TR13F 3.3
80
0.08 25 5.0 2,000
NACK4R7M80V6.3x6.1TR13F 4.7 0.08 40 3.0 2,000
NACK100M80V6.3x8TR13F 10 0.08 60 2.4 2,000
NACK100M80V8x6.5TR13F 0.08 60 2.4 2,000
NACK220M80V8x10.5TR13F 22 0.08 130 1.3 2,000
NACK330M80V8x10.5TR13F 33 0.08 130 1.3 2,000
NACK470M80V10x10.5TR13F 47 0.08 200 0.7 2,000
NACK680M80V12.5x14TR15F 68 0.08 500 0.32 5,000
NACK101M80V12.5x14TR15F 100 0.08 500 0.32 5,000
NACK151M80V12.5x14TR15F 150 0.08 500 0.32 5,000
NACK331M80V16x17TR15F 330 0.08 793 0.17 5,000
NACK471M80V18x17TR13F 470 0.08 917 0.153 5,000
NACK220M100V8x10.5TR13F 22
100
0.07 130 1.3 2,000
NACK330M100V10x10.5TR13F 33 0.07 200 0.7 2,000
NACK470M100V12.5x14TR15F 47 0.07 500 0.32 5,000
NACK680M100V12.5x14TR15F 68 0.07 500 0.32 5,000
NACK101M100V16x17TR15F 100 0.07 793 0.17 5,000
NACK151M100V16x17TR15F 150 0.07 793 0.17 5,000
NACK221M100V18x17TR13F 220 0.07 917 0.153 5,000
NACK331M100V18x17TR13F 330 0.07 917 0.153 5,000
Surface Mount Aluminum Electrolytic Capacitors NACK Series
Frequency 60Hz 120Hz 1KHz 10KHz 100KHz
Correction
Factor 0.7 0.75 0.9 0.95 1.0
RIPPLE CURRENT FREQUENCY
CORRECTION FACTOR
STANDARD VALUES, CASE SIZES AND SPECIFICATIONS
*See part numbering system for how to denote WT termination style
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on
pages T10 & T11 of NIC’s Electrolytic Capacitor catalog.
Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specifi c application - process
details with NIC’s technical support personnel: tpmg@niccomp.com
NACK 101 M 50V 8x10.5 TR 13 WT Y E F
RoHS Compliant
Opt. 5,000 hour (8x10.5 & 10x10.5)
Opt. WT = Wide Terminal
13 = 13" (330mm) Reel, 15 = 15" (380mm) Reel
Tape & Reel
Size in mm
Working Voltage
Tolerance Code M=20%
Capacitance Code in μF, fi rst 2 digits are signifi cant
Third digit is no. of zeros, “R” indicates decimal for
values under 10μF
Series
PART NUMBER SYSTEM
Optional: Suitable for automotive equipment, sourced to special
production and inspection at TS-16949 certifi ed production site
Available in "Y" Control Option (for Automotive Equipment)
5
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
RECOMMENDED LAND PATTERN (mm)
STANDARD TERMINAL
ee
d
+
-
f
Support TerminalsSolder Pads
+-
bb
a
c
Solder Pads
Case Dia. a b c
4x6.1 1.0 2.6 1.8
5x6.1 1.4 3.0 1.8
6.3x6.1 2.1 3.5 1.8
6.3x8 2.1 3.5 1.8
8x6.5 2.2 4.5 1.6
8x10.5 2.8 4.1 2.2
10x10.5 4.5 4.5 2.5
12.5x14 4.3 5.8 2.5
16x17 6.6 6.5 4.0
18x17 6.0 7.5 2.5
Surface Mount Aluminum Electrolytic Capacitors NACK Series
STANDARD TERMINATION
WT STYLE TERMINATION
RECOMMENDED LAND PATTERN (mm)
WIDE TERMINAL
Case Dia. d e f
8x6.5WT 1.8 4.1 5.0
8x10.5WT 2.7 4.0 4.7
10x10.5 WT 3.9 4.4 4.7
12.5x14WT 3.9 6.0 2.5
16x17WT 4.7 8.4 9.6
18x17WT 4.7 8.4 9.6
Case Size Dφ ±0.5 L max. A, B H max. I ±0.3 P ±0.3 W K R S T
4 x 6.1 4.0 6.1 4.3 ± 0.2 5.5 1.8 1.0 0.65 ± 0.15 0.35 ± 0.2 - - -
5 x 6.1 5.0 6.1 5.3 ± 0.2 6.5 2.2 1.5 0.65 ± 0.15 0.35 ± 0.2 - - -
6.3 6.1 6.3 6.1 6.6 ± 0.2 7.8 2.6 1.8 0.65 ± 0.15 0.35 ± 0.2 - - -
6.3 x 8 6.3 8.0 6.6 ± 0.2 7.8 2.6 1.8 0.65 ± 0.15 0.35 ± 0.2 - - -
8 x 6.5 8.0 6.5 8.3 ± 0.2 9.5 3.4 2.2 0.65 ± 0.15 0.35 ± 0.2 - - -
8 x 6.5WT 8.0 6.8 8.3 ± 0.2 9.5 3.4 2.2 0.70 ± 0.10 0.35 ± 0.2 0.70 ± 0.2 5.3 ± 0.2 1.7 ± 0.2
8 x 10.5 8.0 10.5 8.3 ± 0.2 10.0 3.1 3.1 0.90 ± 0.20 0.70 +0.2/-0.5 - - -
8 x 10.5WT 8.0 10.8 8.3 ± 0.2 10.0 3.4 3.1 1.20 ± 0.20 0.70 ± 0.2 0.70 ± 0.2 5.3 ± 0.2 1.3 ± 0.2
10 x 10.5 10.0 10.5 10.3 ± 0.2 12.0 3.2 4.6 1.05 ± 0.35 0.70 +0.2/-0.5 - - -
10 x 10.5WT 10.0 10.8 10.3 ± 0.2 12.0 3.5 4.6 1.20 ± 0.20 0.70 ± 0.2 0.70 ± 0.2 6.9 ± 0.2 1.3 ± 0,.2
12.5 x 14 12.5 14.0 13.2 ± 0.6 15.0 4.5 4.6 1.00 ± 0.40 0.70 +0.3/-0.5 - - -
12.5 x 14WT 12.5 14.3 13.5 ± 0.2 15.0 4.7 4.4 1.20 ± 0.30 0.70 ± 0.3 2.2 ± 0.2 7.1 ± 0.2 2.4 ± 0.2
16 x 17 16.0 17.0 16.7 ± 0.6 19.0 5.2 6.9 1.50 ± 0.60 0.70 +0.3/-0.4 - - -
16 x 17WT 16.0 17.5 17.0 ± 0.2 20.0 5.5 6.9 1.65 ± 0.45 0.70 +0.3/-0.4 3.0 ± 0.2 9.0 ± 0.2 1.9 ± 0.2
18 x 17 18.0 17.0 19.0 ± 0.2 21.0 6.7 6.7 1.20 ± 0.30 0.70 ± 0.3 - - -
18 x 17WT 18.0 17.3 19.0 ± 0.2 21.0 6.7 6.7 1.40 ± 0.20 0.70 ± 0.3 3.0 ± 0.2 11.0 ± 0.2 1.9 ± 0.2
DIMENSIONS (mm)
B
W
P
A
W
P
A
RR
S
B
Termination defl ection:
Standard = ±0.30mm
WT = +0.15mm/-0.05mm
Dφ
L
K
K
H
STANDARD
II
+ - II
T
WT STYLE
+ -
Anti-Vibration Skirt
on WT Style
8mm ~ 18mm Dia.
6NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
CARRIER TAPE
Surface Mount Aluminum Electrolytic Capacitors NACK Series
Case Size A ±0.5 B ±0.2 C ±0.3 D ±0.1 P ±0.1 T ±0.2
4 x 6.1 4.7 4.7 12.0 5.5 8.0 6.4
5 x 6.1 5.7 5.7 12.0 5.5 12.0 6.4
6.3 x 6.1 7.0 7.0 16.0 7.5 12.0 6.4
6.3 x 8 7.0 7.0 16.0 7.5 12.0 8.3
8 x 6.5 8.7 8.7 16.0 7.5 12.0 6.8
8 x 6.5WT
8 X 10.5 8.7 8.7 24.0 7.5 12.0 11.1
8 x 10.5WT
10 x 10.5 10.7 10.7 24.0 11.5 16.0 11.2
10 x 10.5WT
12.5 x 14 13.2 13.2 32.0 14.2 24.0 14.2
12.5 x 14WT 14.0 14.0 32.0 14.2 24.0 14.2
16 x 17 17.5 17.5 44.0 20.2 28.0 17.5
16 x 17WT
18 x 17 19.5 19.5 44.0 20.2 32.0 17.5
18 x17WT
Case Size W ±1.0 Quantity Per Reel
13" Reel 15" Reel
4 x 6.1 14.0 1,200 pcs 2,000 pcs
5 x 6.1 14.0 800 pcs 1,000 pcs
6.3 x 6.1 18.0 800 pcs 1,000 pcs
6.3 x 8 18.0 500 pcs 900 pcs
8 x 6.5 18.0 800 pcs 1,000 pcs
8 X 10.5 26.0 300 pcs 500 pcs
10 x 10.5 26.0 300 pcs 500 pcs
12.5 x 14 34.0 200 pcs* 250 pcs*
16 x 17 46.0 125 pcs* 200 pcs*
18 x 17 46.0 125 pcs 150 pcs
TR13 330mm (13") REEL
TR15 380mm (15") REEL
TAPING SPECIFICATIONS (mm)
1. Both Leader and Trailer tape: Minimum 40mm (1.57") empty carrier tape pockets.
2. Leader tape: Approximately 20cm of cover tape at leader.
3. Connection: Maximum 3 connections (slices) per reel.
13∅ ±0.5
3.0 ± 0.5
330 or 380mm
50∅ Min.
21
±0.8
2.0±0.5
W
REEL
T
APFeeding
+
-
1.5∅ +0.1/- 1.75 ±
D
B
C
1.5φ+0.1/-0 1.75 + 0.15
0.4 + 0.2
4 + 0.1
CARRIER
*See specifi c part number in standard values tables
for available reel diameter.
