NPN-Si-Fototransistor mit V Charakteristik Silicon NPN Phototransistor with V Characteristics Lead (Pb) Free Product - RoHS Compliant SFH 3410 Wesentliche Merkmale Features * Speziell geeignet fur Anwendungen im Bereich von 350 nm bis 970 nm * Angepat an die Augenempfindlichkeit (V) * SMT-Bauform ohne Basisanschlu, geeignet fur IR-Reflow-Loten * Nur gegurtet lieferbar * Especially suitable for applications from 350 nm to 970 nm * Adapted to human eye sensitivity (V) * SMT package without base connection, suitable for IR reflow soldering * Only available on tape and reel Anwendungen Applications * * * * * * * * Umgebungslicht-Detektor Beleuchtungsmesser Dimmungssensor fur Hintergrundbeleuchtung Messen/Steuern/Regeln" Ambient light detector Exposure meter for daylight and artificial light Sensor for Backlight-Dimming For control and drive circuits Typ Type Bestellnummer Ordering Code Fotostrom Ev = 20 lx, Standard light A, VCE = 5 V Photocurrent Ipce (A) SFH 3410 SFH 3410-1/2 SFH 3410-2/3 SFH 3410-3/4 Q65110A1211 Q65110A2653 Q65110A2654 Q65110A2655 >3.2 3.2...10 5...16 8...25 2007-04-02 1 SFH 3410 Grenzwerte (TA = 25 C) Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebs- und Lagertemperatur Operating and storage temperature range Top; Tstg - 40 ... + 100 C Kollektor-Emitterspannung Collector-emitter voltage VCE 5.5 V Kollektorstrom Collector current IC 20 mA Emitter-Kollektorspannung Emitter-collector voltage VEC 0.5 V Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Wellenlange der max. Fotoempfindlichkeit Wavelength of max. sensitivity Smax 570 nm Spektraler Bereich der Fotoempfindlichkeit S = 10% von Smax Spectral range of sensitivity S = 10% of Smax 350 ... 970 nm Bestrahlungsempfindliche Flache Radiant sensitive area A 0.29 mm2 Abmessung der Chipflache Dimensions of chip area LxB LxW 0.75 x 0.75 mm x mm Halbwinkel Half angle 60 Grad. deg. Kapazitat, VCE = 0 V, f = 1 MHz, E = 0 Capacitance CCE 3.9 pF Dunkelstrom Dark current VCE = 5 V ICEO 3 (< 50) nA >3.2 A Kennwerte (TA = 25 C) Characteristics Fotostrom IPCE Photocurrent Ev = 20 lx, Normlicht/standard light A, VCE = 5 V 2007-04-02 2 SFH 3410 Bezeichnung Parameter Symbol Symbol Fotostrom Photocurrent Ev = 20 lx, Normlicht/standard light A VCE = 5 V IPCE Kollektor-Emitter-Sattigungsspannung VCEsat Collector-emitter saturation voltage IC = IPCEmin1) x 0.3, EV = 20 lx Wert Value -1 -2 -3 3.2...6.3 5...10 8...16 100 1) IPCEmin ist der minimale Fotostrom der jeweiligen Gruppe 1) IPCEmin is the min. photocurrent of the specified group 100 Directional Characteristics Srel = f () 40 30 20 10 0 OHF01402 1.0 50 0.8 60 0.6 70 0.4 80 0.2 0 90 100 1.0 2007-04-02 0.8 0.6 0.4 0 20 40 60 80 3 100 120 100 Einheit Unit -4 12.5...25 A 100 mV SFH 3410 Relative Spectral Sensitivity Srel = f () OHF00851 100 Photocurrent IPCE = f (EV), VCE = 5 V OHF00852 1000 3.5 I PCE 80 4.0 pF A % Srel Collector-Emitter Capacitance CCE = f (VCE) CCE 3.0 70 100 2.5 60 2.0 50 V 40 1.5 10 30 1.0 20 0.5 10 1 1 0 400 500 600 700 800 900 nm 1100 OHF00854 80 I CE lx 1000 EV OHF01024 1.8 I PCE I PCE (25 C) 200 lx 70 100 Photocurrent IPCE/IPCE(25 C) = f (TA) Ev = 20 lx, VCE = 1 V ... 5 V Collector-Emitter Current ICE = f (VCE; EV) A 10 1.4 60 1.2 50 1.0 40 100 lx 0.8 30 0.6 20 0.4 10 0 0.2 20 lx 0 1 2 3 4 V 5 0 -50 -30 -10 10 VCE 2007-04-02 30 50 C 90 TA 4 0.0 1E-03 1E-02 1E-01 1E+00 1E+01 VCE 1E+02 V SFH 3410 Mazeichnung Package Outlines 0.8 (0.031) (not connected) 0.5 (0.020) 0.3 (0.012) 0.1 (0.004) Emitter 1.1 (0.043) 0.9 (0.035) 1.7 (0.067) 0.3 (0.012) 0.2 (0.008) 0.0 (0.000) 2.1 (0.083) 1.9 (0.075) GEOY6028 Mae in mm (inch) / Dimensions in mm (inch). 2007-04-02 1.9 (0.075) 1.15 (0.045) 0.95 (0.037) 4.8 (0.189) 4.4 (0.173) 1.1 (0.043) 2.5 (0.098) 2.7 (0.106) Collector 0.8 (0.031) 0.4 (0.016) 0.7 (0.028) 0.6 (0.024) 5 SFH 3410 Lotbedingungen Soldering Conditions Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C T Vorbehandlung nach JEDEC Level 4 Preconditioning acc. to JEDEC Level 4 (nach J-STD-020C) (acc. to J-STD-020C) 255 C 240 C 250 C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 min. condition for IR Reflow Soldering: solder point temperature 235 C for at least 10 sec. Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 s t 0.3 1.3 1 Empfohlenes Lotpaddesign Recommended Solderpad Design 1.8 2.4 1.8 Paddesign for improved heat dissipation OHF02393 Mae in mm (inch) / Dimensions in mm (inch). 2007-04-02 Padgeometrie fur verbesserte Warmeableitung 6 300 SFH 3410 Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2007-04-02 7