REVISION AB PATENT NUMBER 2 MAX SWAY 6159045 DO NOT SCALE FROM THIS PRINT ((No OF POS + 2) x .03937) + .100 REF [1.0000] [2.54] .1096 2.783 REF C (No OF POS -1) x .03937 [1.0000] "A" DETAIL 'D' SCALE 6 : 1 "A" REF 01 "A" 'D' (No OF POS + 2) x .03937 REF [1.0000] MEC1-XX-X-D-RA1-X-SL .460 11.68 REF No OF POSITIONS -05, -08, -20, -30, -40, -50, -60 & -70 (PER ROW - SEE TABLE 2) CARD THICKNESS -01: .031 THICK CARD (USE MEC1-XX-T-D-RAX-X-SL) -02: .062 THICK CARD (USE MEC1-XX-S-D-RAX-X-SL) (SEE TABLES 1 AND 4) C (No OF POS + 2) x .03937 REF [1.0000] .134 3.40 REF .169 4.29 .320 8.13 REF .470 11.94 .03 0.8 .0394 1.000 C .070 1.78 REF (No OF POS -1) x .03937[1.0000] .0394 1.000 .059 1.50 C .049 1.23 REF SEE TABLE 3 SECTION "A"-"A" NOTES: 1.5 MAX SWAY .350 8.89 REF .022 0.56 REF .013 0.32 REF (TYP) .025 0.64 REF (TYP) MEC1-120-02-XX-D-RA1-SL SHOWN (IN-PROCESSES ON SHEET 2) .01 0.2 REF (TYP) DETAIL 'E' SCALE 4 : 1 C-150-01-X-P C-150-04-X-P "E" SEE NOTE 11 1. C REPRESENTS A CRITICAL DIMENSION. C 2. COPLANARITY: SEE TABLE 3. 3. BURR ALLOWANCE: .004[0.10] MAX. 4. NOTE DELETED. 5. MINIMUM PUSHOUT FORCE: .5 LB. 6. NOTE DELETED. 7. TAIL OPTION -RA1 TO HAVE C-150-01-XX-X CONTACT FULLY PRE-FORMED. 8. TO BE MEASURED ON OPPOSING CONTACTS. 9. BODIES TO BE LAYER PACKAGED FOR TRANSIT BETWEEN INVENTORY AND PRODUCTION. 10. TO BE MEASURED AT 2 MAIN 90 BENDS. 11. HOT BAR FORM AFTER ASSEMBLY (WILL PRODUCE RETENTION FLANGE AS SHOWN). 12. -F PLATING OPTION CAN BE SUBBED FOR -FM, -L FOR -LM, & -S FOR -SM UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: DECIMALS ANGLES .XX: .01 [.3] 2 .XXX: .005 [.13] .XXXX: .0020 [.051] PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. MATERIAL: DO NOT SCALE DRAWING FLAMMABILITY RATING: UL 94V-0 DETAIL 'F' SCALE 4 : 1 SOLDER LOCKS NON-POLARIZED OPTION -NP: NO POLARIZED POSITION (ONLY AVAILABLE ON -05, -08, -20, & -30 POSITIONS) -BLANK: BODY IS POLARIZED TAIL OPTION -RA1: STANDARD -RA2: ELEVATED ROW SPECIFICATION -D: DOUBLE (USE MEC1-XX-X-D-RAX-X-SL) "B" .002 (TYP) (SEE NOTE 8) "C" .005 'F' .225 5.72 REF OPTION -TR: TAPE & REEL (SUBSTITUTE -T: FOR -TR: DESIGNATION WHEN USING -XM PLATING DESIGNATION WITH BOTH -NP AND -SL OPTIONS) (-T OR -TR OPTION NOT AVAILABLE FOR 70 POS) PLATING -F: GOLD FLASH (USE C-150-XX-F-P) -L: LIGHT SELECTIVE GOLD (USE C-150-XX-L-P) -S: SELECTIVE GOLD (USE C-150-XX-S-P) -FM: FLASH GOLD SELECTIVE, MATTE TIN TAIL (USE C-150-XX-F-P) -LM: LIGHT SELECTIVE GOLD, MATTE TIN TAIL (USE C-150-XX-L-P) -SM: SELECTIVE GOLD, MATTE TIN TAIL (USE C-150-XX-S-P) 02 .268 6.81 REF MEC1-1XX-XX-XX-D-RAX-XX-SL-XX SHEET SCALE: 2:1 INSULATOR: LCP -01: COLOR: NATURAL -02: COLOR: BLACK CONTACT: PHOS BRONZE F:\DWG\MISC\MKTG\MEC1-1XX-XX-XX-D-RAX-XX-SL-XX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: 1mm MEC1 -RA ASSEMBLY DWG. NO. MEC1-1XX-XX-XX-D-RAX-XX-SL-XX BY: MARKS 01/25/00 SHEET 1 OF 3 REVISION AB IN PROCESS (C-150-04-X-P SHOWN) (-RA1 SECOND ROW) C .2225 5.652 (SEE NOTE 10) PACKAGING VIEW STANDARD TAIL OPTION ELEVATED TAIL OPTION .4082 10.367 90 C .092 2.34 .1430 3.632 .2045 5.194 90 TUBE: PT-1-24-01-106 PLUG: TP-07 TUBE: PT-1-24-02-106 PLUG: TP-13 C * DIMENSIONS ALSO APPLY TO C-150-14-X-P C-150-X1-X-P C-150-X4-X-P .089 2.26 .017 0.43 .325 8.24 REF .511 12.98 REF IN-PROCESS 2 IN-PROCESS 1 (-RA1 SECOND ROW) (-RA1 FIRST ROW) PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 4:1 F:\DWG\MISC\MKTG\MEC1-1XX-XX-XX-D-RAX-XX-SL-XX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: 1mm MEC1 -RA ASSEMBLY DWG. NO. MEC1-1XX-XX-XX-D-RAX-XX-SL-XX BY: MARKS 01/25/00 SHEET 2 OF 3 REVISION AB IN-PROCESS 2 (-RA2 FIRST ROW) C .1230 3.124 (SEE NOTE 10) .3070 7.798 (SEE NOTE 10) C C C-150-X5-X-P 90 .4112 10.443 .3058 7.767 .0170 0.432 .017 0.43 C 90 .436 11.07 .0378 0.959 +2 90 - 5 .350 8.88 .1160 2.946 C IN-PROCESS 2 90 (-RA2 SECOND ROW) C .1430 3.632 .0960 2.438 C-150-X6-X-P IN-PROCESS 1 IN-PROCESS 1 (-RA2 SECOND ROW) (C-150-06-X-P SHOWN) (-RA2 FIRST ROW) (C-150-05-X-P SHOWN) * DIMENSIONS ALSO APPLY TO C-150-15-X-P MEC1-120-02-XX-D-RA2-SL SHOWN "B" [DIFFERENT AS SHOWN, OTHERWISE SAME AS TAIL OPTION -RA1] .010 0.25 .219[5.55] REF "B" 'B' 'C' SEE TABLE 3, SHT 1 SECTION "B"-"B" SCALE 3 : 1 MEC1-XX-X-D-RA2-SL-X .052 1.32 .025 0.64 (TYP) .022 0.56 REF PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. .123 3.12 C DETAIL 'B' SCALE 8 : 1 C-150-05-X-P F:\DWG\MISC\MKTG\MEC1-1XX-XX-XX-D-RAX-XX-SL-XX-MKT.SLDDRW C C 'G' .354 8.98 REF .356 9.04 .024 0.62 REF C .002.003 0.060.08 .239 6.07 REF C-150-06-X-P TAIL OPTION -RA2 [ELEVATED] SHOWN .035 0.89 .092 2.34 * DIMENSIONS ALSO APPLY TO C-150-16-X-P 5 MAX DETAIL 'C' SCALE 10 : 1 (DIMENSIONS APPLY TO -RA1 & -RA2 OPTIONS) (APPLIES TO BOTH ROWS) (SEE NOTE 11 & DETAIL "E", SHT 1) DO NOT SCALE DRAWING DETAIL 'G' SCALE 4 : 1 SHEET SCALE: 2:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: 1mm MEC1 -RA ASSEMBLY DWG. NO. MEC1-1XX-XX-XX-D-RAX-XX-SL-XX BY: MARKS 01/25/00 SHEET 3 OF 3