AP01C FAST RECOVERY RECTIFIER DIODE PRV : 1000 Volts Io : 0.2 Ampere DO - 41 FEATURES : * * * * * * * High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Fast switching for high efficiency Pb / RoHS Free 1.00 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) 0.205 (5.2) 0.166 (4.2) MECHANICAL DATA : 1.00 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) * Case : DO-41 Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.339 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL VALUE UNIT Maximum Peak Reverse Voltage VRM 1000 V Maximum Peak Reverse Surge Voltage VRSM 1050 V Maximum Average Forward Current IF(AV) 0.2 A IFSM 5 A VF 4 V IR 100 A IR(H) 500 A Maximum Reverse Recovery Time ( Note 1 ) Trr 200 s Junction Temperature Range TJ - 40 to + 150 C Storage Temperature Range TSTG - 40 to + 150 C Maximum Peak Forward Surge Current ( 50 Hz, Half-cycle, Sine wave, Single Shot ) Maximum Forward Voltage at I F = 0.2 A Maximum Reverse Current at V R = VRM Ta = 25 C Maximum Reverse Current at V R = VRM Ta = 100 C Note: ( 1 ) Reverse Recovery Test Conditions : I F = 100 mA, IRP = 100 mA. Page 1 of 2 Rev. 02 : March 25, 2005 RATING AND CHARACTERISTIC CURVES ( AP01C) FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 100 F specimen 100mA IF 100 mA IRP 100 20S 0.1 IRP 200S Trr NOTE : IF = IRP = 100 mA TO 10 mA FIG.3 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 5 .025 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES FIG.2 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 0.20 0.15 010 0.05 0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE, ( C) 4 3 2 1 0 1 2 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 50Hz FORWARD CURRENT, AMPERES FIG.4 - TYPICAL FORWARD CHARACTERISTICS 10 1.0 Ta = 25 C 0.1 0.01 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 FORWARD VOLTAGE, VOLTS Page 2 of 2 Rev. 02 : March 25, 2005