Spec No. TQ3C-8EAF0-E1DEU25-02
SPEC
Date November 25, 2009
TYPE : TCG057VGLCS-H50
<5.7 inch VGA transmissive color TFT
with LED backlight>
KYOCERA CORPORATION
KAGOSHIMA HAYATO PLANT
LCD DIVISION
 This specification is subject to change without notice.
Consult Kyocera before ordering.
Designed by: Engineering dept. Confirmed by: QA dept.
Original
Issue Date Prepared Checked
Approved
Checked
Approved
July 8, 2009
CONTENTS
1. Application
2. Construction and outline
3. Mechanical specifications
4. Absolute maximum ratings
5. Electrical characteristics
6. Optical characteristics
7. Interface signals
8. Input timing characteristics
9. Backlight characteristics
10. Lot number identification
11. Warranty
12. Precautions for use
13. Reliability test data
14. Outline drawing
Dec7,2009
Spec No.
TQ3C-8EAF0-E1DEU25-02
Part No.
TCG057VGLCS-H50
Page
-
Warning
1. This Kyocera LCD module has been specifically designed for use only in
electronic devices and industrial machines in the area of audio control,
office automation, industrial control, home appliances, etc. The module
should not be used in applications where the highest level of safety and
reliability are required and module failure or malfunction of such module
results in physical harm or loss of life, as well as enormous damage or loss.
Such fields of applications include, without limitation, medical, aerospace,
communications infrastructure, atomic energy control. Kyocera expressly
disclaims any and all liability resulting in any way to the use of the module
in such applications.
2. Customer agrees to indemnify, defend and hold Kyocera harmless
from and against any and all actions, claims, damages, liabilities,
awards, costs, and expenses, including legal expenses, resulting from or
arising out of Customer's use, or sale for use, or Kyocera modules in
applications.
Caution
1. Kyocera shall have the right, which Customer hereby acknowledges, to
immediately scrap or destroy tooling for Kyocera modules for which no
Purchase Orders have been received from the Customer in a two-year period.
Spec No.
TQ3C-8EAF0-E1DEU25-02
Part No.
TCG057VGLCS-H50
Page
-
Revision record
Designed by : Engineering dept. Confirmed by : QA dept.
Date Prepared Checked Approved Checked Approved
Nov. 25, 2009
Rev.No. Date Page Descriptions
01 Aug 12, 2009 3 5.Electrical characteristics
〜Change ”Current consumption”
〜Change “Display pattern”
1 3.Mechanical specification
〜Change “Mass”
2 4-1. Electrical absolute maximum ratings
〜（）Delete “LED forward current”
3 5. Electrical characteristics
〜Change ”Current consumption”
4 6.Optical characteristics
〜（）Delete Brightness
〜Change “Chromaticity coordinates”
02 Nov. 25, 2009
12 13.Reliability test data
〜Change “Judgement”
Spec No.
TQ3C-8EAF0-E1DEU25-02
Part No.
TCG057VGLCS-H50
Page
1
M623090
1. Application
This document defines the specification of TCG057VGLCS-H50. (RoHS Compliant)
2. Construction and outline
LCD
Backlight system
Polarizer
Additional circuit
: Transmissive color dot matrix type TFT
: LED
: Glare Low-reflection treatment
: Timing controller, Power supply (3.3V input)
(without constant current circuit for LED Backlight)
3. Mechanical specifications
Item Specification Unit
Outline dimensions 1) 144(W)×(104.8)(H)×13(D) mm
Active area 115.2(W)×86.4(H)
(14.4cm/5.7 inch(Diagonal)) mm
Dot format 640×(B,G,R)(W)×480(H) dot
Dot pitch 0.06(W)×0.18(H) mm
Base color 2) Normally White -
Mass 210 g
1) Projection not included. Please refer to outline for details.
2) Due to the characteristics of the LCD material, the color varies with environmental temperature.
Spec No.
TQ3C-8EAF0-E1DEU25-02
Part No.
TCG057VGLCS-H50
Page
2
M623090
4. Absolute maximum ratings
4-1. Electrical absolute maximum ratings
Item Symbol Min. Max. Unit
Supply voltage VDD 0 4.0 V
Input signal voltage 1) VIN -0.3 6.0 V
LED forward current 2), 3) IF - 100 mA
1) Input signal : CK, R0〜R5, G0〜G5, B0〜B5, HSYNC, VSYNC, ENAB, R/L, U/D
2) For each “AN-CA”
3) Do not apply reversed voltage.
4-2. Environmental absolute maximum ratings
Item Symbol Min. Max. Unit
Operating temperature 1) TOP -20 70 °C
Storage temperature 2) TSTO -30 80 °C
Operating humidity 3) HOP 10 4) %RH
Storage humidity 3) HSTO 10 4) %RH
Vibration - 5) 5) -
Shock - 6) 6) -
1) Operating temperature means a temperature which operation shall be guaranteed. Since display
performance is evaluated at 25°C, another temperature range should be confirmed.
2) Temp. = -30°C＜48h , Temp. = 80°C＜168h
 Store LCD at normal temperature/humidity. Keep them free from vibration and shock.
An LCD that is kept at a low or a high temperature for a long time can be defective due to
other conditions, even if the low or high temperature satisfies the standard.
(Please refer to “Precautions for Use” for details.)
3) Non-condensing
4) Temp.≦40°C, 85%RH Max.
 Temp.＞40°C, Absolute humidity shall be less than 85%RH at 40°C.
5)
Frequency 10〜55 Hz
Vibration width 0.15mm
Acceleration value
(0.3〜9 m/s2)
Interval 10-55-10 Hz １minutes
2 hours in each direction X, Y, Z (6 hours total)
EIAJ ED-2531
6) Acceleration: 490 m/s2, Pulse width: 11 ms
3 times in each direction: ±X, ±Y, ±Z
 EIAJ ED-2531
Spec No.
TQ3C-8EAF0-E1DEU25-02
Part No.
TCG057VGLCS-H50
Page
3
M623090
5. Electrical characteristics
  Temp. = -20〜70°C
Item Symbol Condition Min. Typ. Max. Unit
Supply voltage 1) VDD - 3.0 3.3 3.6 V
Current consumption IDD 2) - 150 195 mA
Permissive input ripple voltage VRP - - - 100 mVp-p
VIL "Low" level 0 - 0.3VDD V
Input signal voltage 3) VIH "High" level 0.7VDD - VDD V
1) VDD-turn-on conditions
0＜t1≦20ms

 0＜t2≦50ms

0＜t3≦1s
2) Display pattern:
V
DD = 3.3V, Temp. = 25°C
1 2 3 ・・・・・・・・・・・・・・1920(dot)
1
2
3
:
:
:
479
480
(dot)
■□■□■□■□■□■□■□■□■□■
□■□■□■□■□■□■□■□■□■□
■□■□■□■□■□■□■□■□■□■
□■□■□■□■□■□■□■□■□■□
■□■□■□■□■□■□■□■□■□■
□■□■□■□■□■□■□■□■□■□
■□■□■□■□■□■□■□■□■□■
□■□■□■□■□■□■□■□■□■□
3) Input signal : CK, R0〜R5, G0〜G5, B0〜B5, HSYNC, VSYNC, ENAB, R/L, U/D
3.0V3.0V
0.3V
t1 t2 t3
Signal 3)
Spec No.
TQ3C-8EAF0-E1DEU25-02
Part No.
TCG057VGLCS-H50
Page
4
M623090
6. Optical characteristics
  Measuring spot =φ6.0mm, Temp. = 25°C
Item Symbol Condition Min. Typ. Max. Unit
Rise τ r θ=φ=0° - 10 - ms
Response time Down τ d θ=φ=0° - 25 - ms
θUPPER - 80 -
θLOWER - 80 -
deg.
φLEFT - 80 -
Viewing angle range
View direction
: 12 o’clock
(Gray inversion)
φRIGHT
CR≧5
- 80 -
deg.
Contrast ratio CR θ=φ=0° 300 500 - -
Brightness L IL=60mA/Line 560 800 - cd/m2
x 0.56 0.61 0.66
Red
y θ=φ=0°
0.31 0.36 0.41
x 0.29 0.34 0.39
Green y θ=φ=0° 0.51 0.56 0.61
x 0.09 0.14 0.19
Blue y θ=φ=0° 0.05 0.10 0.15
x 0.27 0.32 0.37
Chromaticity
coordinates
White
y θ=φ=0°
0.29 0.34 0.39
-
6-1. Definition of contrast ratio
CR(Contrast ratio) ＝
Brightness with all pixels "White"
Brightness with all pixels "Black"
6-2. Definition of response time
Brightness
100%
90%
τd
90%
10%
τr
White Black White
Spec No.
TQ3C-8EAF0-E1DEU25-02
Part No.
TCG057VGLCS-H50
Page
5
M623090
6-3. Definition of viewing angle
6-4. Brightness measuring points
1) Rating is defined on the average in the viewing area. (measured point 1〜5)
2) Measured 30 minutes after the LED is powered on. (Ambient temp. = 25°C)
‑x +x
‑y
+y
φ=0° θLOWER
θUPPER
‑x +x
‑y
θ=0°
φRIGHT
φLEFT
θdirection φdirection
+y
(dot)
(dot)
１６０×3 ３２0×3 ４８0×3
１２０
２４0
３６0
1
2
3
4
5
Spec No.
TQ3C-8EAF0-E1DEU25-02
Part No.
TCG057VGLCS-H50
Page
6
M623090
7. Interface signals
7-1. LCD
No. Symbol Description I/O Note
1 GND GND -
2 CK Clock signal for sampling each data signal I
3 HSYNC Horizontal synchronous signal (negative) I
4 VSYNC Vertical synchronous signal (negative) I
5 GND GND -
6 R0 RED data signal (LSB) I
7 R1 RED data signal I
8 R2 RED data signal I
9 R3
RED data signal I
10 R4
RED data signal I
11 R5
RED data signal (MSB) I
12 GND
GND -
13 G0
GREEN data signal (LSB) I
14 G1
GREEN data signal I
15 G2
GREEN data signal I
16 G3 GREEN data signal I
17 G4
GREEN data signal I
18 G5 GREEN data signal (MSB) I
19 GND
GND -
20 B0
BLUE data signal (LSB) I
21 B1
BLUE data signal I
22 B2
BLUE data signal I
23 B3
BLUE data signal I
24 B4
BLUE data signal I
25 B5
BLUE data signal (MSB) I
26 GND
GND -
27 ENAB
Signal to settle the horizontal display position (positive) I 1)
28 VDD 3.3V power supply -
29 VDD 3.3V power supply -
30 R/L
Horizontal display mode select signal
L : Normal , H : Left / Right reverse mode I 2)
31 U/D
Vertical display mode select signal
H : Normal , L : Up / Down reverse mode I 2)
32 NC
No connect I
33 GND
GND -
LCD connector ： IMSA-9632S-33Z02-GF1 (IRISO)
Recommended matching FFC or FPC ： 0.5mm pitch
Spec No.
TQ3C-8EAF0-E1DEU25-02
Part No.
TCG057VGLCS-H50
Page
7
M623090
1) The horizontal display start timing is settled in accordance with a rising timing of ENAB signal.
In case ENAB is fixed "Low", the horizontal start timing is determined.
Don't keep ENAB "High" during operation.
2)
R/L = L R/L = H
U/D = H U/D = H
R/L = L R/L = H
U/D = L U/D = L
7-2．LED
No. Symbol Description
1 AN1
Anode１
2 AN2
Anode２
3 CA1
Cathode１
4 CA2
Cathode２

LCD side connector ： PHR-4 (JST)
Recommended matching connector
： B4B-PH-SM4-TB (JST)
： B4B-PH-SM4-TB(LF)(SN) (JST)･･･(RoHS Compliant)
： S4B-PH-SM4-TB (JST)
： S4B-PH-SM4-TB (LF)(SN) (JST)･･･(RoHS Compliant)
Spec No.
TQ3C-8EAF0-E1DEU25-02
Part No.
TCG057VGLCS-H50
Page
8
M623090
8. Input timing characteristics
8-1. Timing characteristics
Item Symbol Min Typ Max Unit Note
Frequency 1/Tc 22.66 25.18 27.69 MHz
Clock Duty ratio Tch/Tc 40 50 60 %
Set up time Tds 5 − − ns
Data Hold time Tdh 10 − − ns
30.0 31.8 − μs
Cycle TH
770 800 850 clock
Horizontal sync.
signal
Pulse width THp 2 96 200 clock
Cycle TV 515 525 560 line
Vertical sync.
signal Pulse width TVp 2 − 34 line
Horizontal display period THd 640 clock
Hsync,-Clock phase difference THc 10 − Tc-10 ns
Hsync-Vsync. phase difference TVh 2Tc − TH-THp ns
Vertical sync. signal start position TVs 34 line
Vertical display period TVd 480 line
1) In case of lower frequency, the deterioration of the display quality, flicker etc., may occur.
8-2. Horizontal display position
Item Symbol Min Typ Max Unit Note
Set up time Tes 5 − Tc-10 ns
Enable signal Pulse width Tep 2 640 TH-10 clock
HSYNC – Enable signal phase difference The 44 − 104 clock
1) When ENAB is fixed at "Low", the display starts from the data of C104(clock) as shown in 8-5.
2) The horizontal display position is determined by ENAB signal.
8-3. Vertical display position
1) The vertical display position (TVs) is 34th line.
2) ENAB signal is independent of vertical display position.
Spec No.
TQ3C-8EAF0-E1DEU25-02
Part No.
TCG057VGLCS-H50
Page
9
M623090
8-4. Input Data Signals and Display position on the screen
8-5. Input timing characteristics
1) When ENAB is fixed at ”Low”, the display starts from the data of C104(Clock).
2) The vertical display position(TVs) is fixed at 34th line.
ＧＲ
Ｄ１，ＤＨ４８０ Ｄ２，ＤＨ４ ８０ Ｄ３，ＤＨ４８０
Ｄ１，ＤＨ２ Ｄ２，ＤＨ２ Ｄ３，ＤＨ２
Ｂ
Ｄ１，ＤＨ１ Ｄ２，ＤＨ１ Ｄ３，ＤＨ１ Ｄ６４０，ＤＨ１
Horizontalsync.
Signal
(Hsync)
THp
TH
THc
Tch
Tcl
Tds
Tdh
D1 D2 D640
Vertical invalid data period
The
Tes
THd
Tep
TVp
TVh
TVs
TV
TVd
DH1
DH2
DH480
Clocksignal(CK)
Datasignal
(R0〜R5,G0〜G5,
B0〜B5)
DataEnablesignal
(ENAB)
Verticalsync.
Signal(Vsync)
Horizontalsync.
(Hsync)
Datasignal
(R0〜R5,G0〜G5,
B0〜B5)
V
ertical invalid data period
NumberofH‑data
C1 C2 CN1)
1line
Nline2)
…………
…………………………………
2line
0.7VDD
0.3VDD
0.7VDD
0.3VDD
0.3VDD
0.3VDD
0.3VDD
0.3VDD
0.7VDD
0.7VDD
0.7VDD
0.7VDD
0.7VDD
0.3VDD
0.3VDD
0.3VDD
0.7VDD
0.3VDD
0.7VDD
Tc
Horizontal invalid period Horizontal invalid data period
Spec No.
TQ3C-8EAF0-E1DEU25-02
Part No.
TCG057VGLCS-H50
Page
10
M623090
9. Backlight characteristics
Item Symbol Min. Typ. Max. Unit Note
Forward current 1) IF - 60 - mA Ta=-20〜70°C
- 18.9 22.1 V
IF=60mA, Ta=-20℃
- 18.0 21.2 V
IF=60mA, Ta=25℃
Forward voltage 1) VF
- 17.5 20.6 V
IF=60mA, Ta=70℃
Operating life time 2), 3) T - 50,000 - h IF=60mA, Ta=25℃
1) For each “AN-CA”
2) When brightness decrease 50% of minimum brightness.
3) Life time is estimated data.(Condition : IF=60mA, Ta=25℃ in chamber).
4) An input current below 15mA may reduce the brightness uniformity of the LED backlight.
This is because the amount of light from each LED chip is different. Therefore, please evaluate carefully
before finalizing the input current.
10. Lot number identification
The lot number shall be indicated on the back of the backlight case of each LCD.
TCG057VGLCS-H50 - □□ - □□ - □ MADE IN □□□□□
↓ ↓ ↓ ↓ ↓
   1 2 3 4 5

Year 2009 2010 2011 2012 2013 2014
Code 9 0 1 2 3 4
Month Jan. Feb. Mar. Apr. May Jun.
Code 1 2 3 4 5 6
Month Jul. Aug. Sep. Oct. Nov. Dec.
Code 7 8 9 X Y Z
No1. - No5. above indicate
1. Year code
2. Month code
3. Date
4. Version Number
5. Country of origin (Japan or China)
Spec No.
TQ3C-8EAF0-E1DEU25-02
Part No.
TCG057VGLCS-H50
Page
11
M623090
11. Warranty
11-1. Incoming inspection
Please inspect the LCD within one month after your receipt.
11-2. Production warranty
Kyocera warrants its LCD’s for a period of 12 months from the ship date. Kyocera shall, by mutual
agreement, replace or re-work defective LCD’s that are shown to be Kyocera’s responsibility.
12. Precautions for use
12-1. Installation of the LCD
1) The LCD has a grounding hole. Please ground the LCD to prevent noise and to stabilize its
performance as circumstances demand.
2) A transparent protection plate shall be added to protect the LCD and its polarizer
3) The LCD shall be installed so that there is no pressure on the LSI chips.
4) The LCD shall be installed flat, without twisting or bending.
5) Please refer to the following our recommendable value of Clamp-down torque when installing.
Clamp-down torque : 0.32±0.03N･m
Please set up ‘SPEED-LOW’, ‘SOFT START-SLOW’ when using electric driver.
Recommendable screw JIS tapping screw two types nominal dia.3.0mm installing boss hole
depth 3.5±0.5mm
Please be careful not to use high torque which may damage LCD in installation.
6) A transparent protection sheet is attached to the polarizer. Please remove the protection film
slowly before use, paying attention to static electricity.
12-2. Static electricity
1) Since CMOS ICs are mounted directly onto the LCD glass, protection from static electricity is
required.
2) Workers should use body grounding. Operator should wear ground straps.
12-3. LCD operation
1) The LCD shall be operated within the limits specified. Operation at values outside of these limits
may shorten life, and/or harm display images.
12-4. Storage
1) The LCD shall be stored within the temperature and humidity limits specified.
Store in a dark area, and protect the LCD from direct sunlight or fluorescent light.
2) Always store the LCD so that it is free from external pressure onto it.
Initial　state　(GND connection)
Customer selection
Front bezel
Heat sink
PCB
Shield cover
Front bezel, heat sink and shield cover are
connected at the ground hole, but please
connect the ground hole to the external ground
for enhancement.
Ground hole
① Bolt + Nut
② Bolt + Nut + Cable
Conneted between heat sink
and signal GND.
Spec No.
TQ3C-8EAF0-E1DEU25-02
Part No.
TCG057VGLCS-H50
Page
12
M623090
12-5. Usage
1) DO NOT store in a high humidity environment for extended periods. Polarizer degradation bubbles,
and/or peeling off of the polarizer may result.
2) The front polarizer is easily scratched or damaged. Prevent touching it with any hard material, and
from being pushed or rubbed.
3) The LCD screen may be cleaned by wiping the screen surface with a soft cloth or cotton pad using a
little Ethanol.
4) Water may cause damage or discoloration of the polarizer. Clean condensation or moisture from
any source immediately.
5) Always keep the LCD free from condensation during testing. Condensation may permanently spot
or stain the polarizer.
6) Do not pull the LED lead wires and do not bend the root of the wires. Housing should be designed
to protect LED lead wires from external stress.
7) Do not disassemble LCD because it will result in damage.
8) This Kyocera LCD has been specifically designed for use in general electronic devices, but not
for use in a special environment such as usage in an active gas. Hence, when the LCD is supposed
to be used in a special environment, evaluate the LCD thoroughly beforehand and do not expose
the LCD to chemicals such as an active gas.
9) Please do not use solid-base image pattern for long hours because a temporary afterimage may
appear. We recommend using screen saver etc. in cases where a solid-base image pattern must
be used.
10) Liquid crystal may leak when the LCD is broken. Be careful not to let the fluid go into your eyes
and mouth. In the case the fluid touches your body; rinse it off right away with water and soap.
13. Reliability test data

Test item Test condition Test time Judgement
High temp.
atmosphere 80°C 240h
Display function
Display quality
Current consumption
: No defect
: No defect
: No defect
Low temp.
atmosphere -30°C 240h
Display function
Display quality
Current consumption
: No defect
: No defect
: No defect
High temp.
humidity
atmosphere
40°C 90% RH 240h
Display function
Display quality
Current consumption
: No defect
: No defect
: No defect
Temp. cycle
-30°C
R.T.
80°C
0.5h
0.5h
0.5h
10cycles
Display function
Display quality
Current consumption
: No defect
: No defect
: No defect
High temp.
operation 70°C 500h
Display function
Display quality
Current consumption
: No defect
: No defect
: No defect
1) Each test item uses a test LCD only once. The tested LCD is not used in any other tests.
2) The LCD is tested in circumstances in which there is no condensation.
3) The reliability test is not an out-going inspection.
4) The result of the reliability test is for your reference purpose only.
 The reliability test is conducted only to examine the LCD's capability.

Spec No. TQ3C-8EAF0-E2DEU25-00
Date July 8, 2009
KYOCERA INSPECTION STANDARD
TYPE : TCG057VGLCS-H50
KYOCERA CORPORATION
KAGOSHIMA HAYATO PLANT
LCD DIVISION
Designed by : Engineering dept. Confirmed by : QA dept.
Original
Issue Date Prepared Checked
Approved
Checked
Approved
July 8, 2009
Spec No.
TQ3C-8EAF0-E2DEU25-00
Part No.
TCG057VGLCS-H50
Page
-
Revision record
Designed by : Engineering dept. Confirmed by : QA dept.
Date Prepared Checked Approved Checked Approved
Rev.No. Date Page Descriptions
Spec No.
TQ3C-8EAF0-E2DEU25-00
Part No.
TCG057VGLCS-H50
Page
1

Visuals specification
1) Note
Note
1. Customer identified anomalies not defined within this inspection standard shall be
reviewed by Kyocera, and an additional standard shall be determined by mutual
consent.
2. This inspection standard about the image quality shall be applied to any defect within
the active area and shall not be applicable to outside of the area.
General
3. Inspection conditions
Luminance
Inspection distance
Temperature
Direction
: 500 Lux min.
: 300 mm.
: 25 ± 5℃
: Directly above
Bright dot defect The dot is constantly “on” when power applied to the
LCD, even when all “Black” data sent to the screen.
Inspection tool: 5% Transparency neutral density filter.
Count dot: If the dot is visible through the filter.
Don’t count dot: If the dot is not visible through the
filter.
䌒䌇䌂䌒䌇䌂䌒䌇䌂
䌒䌇䌂䌒䌇䌂䌒䌇䌂
䌒䌇䌂䌒䌇䌂䌒䌇䌂

dot defect
Black dot defect The dot is constantly “off” when power applied to the
LCD, even when all “White” data sent to the screen.
Dot defect
Adjacent dot Adjacent dot defect is defined as two or more bright dot
defects or black dot defects.
䌒䌇䌂䌒䌇䌂䌒䌇䌂
䌒䌇䌂䌒䌇䌂䌒䌇䌂
䌒䌇䌂䌒䌇䌂䌒䌇䌂

dot defect
Bubble, Scratch,
Foreign particle
(Polarizer, Cell,
Backlight)
Visible operating (all pixels “Black” or “White”) and non
operating.
External
inspection
Appearance
inspection
Does not satisfy the value at the spec.
Others LED wires Damaged to the LED wires, connector, pin, functional
failure or appearance failure.
Definition of
inspection item
Definition
of size
Definition of circle size
ｄ＝(ａ＋ｂ)/2
Definition of linear size
Spec No.
TQ3C-8EAF0-E2DEU25-00
Part No.
TCG057VGLCS-H50
Page
2

2) Standard
Classification Inspection item Judgement standard
Bright dot defect Acceptable number
Bright dot spacing
: 4
: 5 mm or more
Black dot defect Acceptable number
Black dot spacing
: 5
: 5 mm or more
Bright dot
defect Acceptable number : 2
2 dot join
Black dot
defect Acceptable number : 3
3 or more dots join Acceptable number : 0
Dot
defect
Total dot defects Acceptable number : 5 Max
Defect
(in LCD
glass)
Others White dot, Dark dot
(Circle)
Size (mm)
A
cce
p
table number
0.2 ＜d≦0.2 (Ne
g
lected)
0.2 ＜d≦0.4 5
0.4 ＜d≦0.5 3
0.5 ＜d0
Polarizer (Scratch)
Width (mm) Len
g
th (mm)
A
cce
p
table number
0.1 ＜
W
≦0.1 − (Neglected)
2.0 ＜L ≦5.0 (Neglected)
0.1 ＜ W ≦ 0.3 5.0 ＜L ≦5.0 0
0.3 ＜
W
≦0.3 −0
Polarizer (Bubble)
Size (mm)
A
cce
p
table number
0.2 ＜d≦0.2 (Ne
g
lected)
0.2 ＜d≦0.3 5
0.3 ＜d≦0.5 3
0.5 ＜d≦0.4 0
Foreign particle
（Circular shape）
Size (mm)
A
cce
p
table number
0.2 ＜d≦0.2 (Ne
g
lected)
0.2 ＜d≦0.4 5
0.4 ＜d≦0.5 3
0.5 ＜d≦0.4 0
External inspection
(Defect on
Polarizer or
between Polarizer
and LCD glass)
Foreign particle
（Linear shape）
Scratch
Width (mm) Len
g
th (mm)
A
cce
p
table number
0.00 ＜
W
≦0.03 − (Neglected)
2.0 ＜L ≦2.0 (Neglected)
2.0 ＜L ≦4.0 3
0.03 ＜ W ≦ 0.10
4.0 ＜L≦5.0 0
0.1 ＜ W ≦0.3 − (According to
circular shape)
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Kyocera:
TCG057VGLCS-H50