UPC2708T UPC2711T D 3 GHz SILICON MMIC WIDE-BAND AMPLIFIER FEATURES GAIN vs. FREQUENCY 20 * HIGH GAIN: 15 dB (UPC2708T) UE * WIDE FREQUENCY RESPONSE: 3 GHz UPC2708 * INTERNAL CURRENT REGULATION MINIMIZES GAIN CHANGE OVER TEMPERATURE * 5 V SINGLE SUPPLY VOLTAGE * SUPER SMALL PACKAGE Gain, GS (dB) 15 * SATURATED OUTPUT POWER: +10 dBm (UPC2708T) UPC2711 10 5 IN * TAPE AND REEL PACKAGING OPTION AVAILABLE 0 0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency, f (GHz) DESCRIPTION NT The UPC2708T and UPC2711T are Silicon Monolithic integrated circuits manufactured using the NESAT III process. These devices are suitable as buffer amplifiers for wide-band applications. They are designed for low cost gain stages in cellular radios, GPS receivers, DBS tuners, PCN, and test/ measurement equipment. SC O NEC's stringent quality assurance and test procedures ensure the highest reliability and performance. ELECTRICAL CHARACTERISTICS (TA = 25 C, f = 1 GHz, VCC = 5 V) PART NUMBER PACKAGE OUTLINE SYMBOLS PARAMETERS AND CONDITIONS UPC2708T T06 UPC2711T T06 UNITS MIN TYP MAX MIN TYP MAX ICC Circuit Current (no signal) mA 20 26 33 9 12 15 GS Small Signal Gain dB 13 15 18.5 11 13 16.5 fU Upper Limit Operating Frequency (The gain at fU is 3 dB down from the gain at 0.1 GHz) GHz 2.7 2.7 2.9 Gain Flatness, f = 0.1 - 2.6 GHz f = 0.1 - 2.5 GHz PSAT Saturated Output Power dBm P1dB Output Power at 1 dB Compression Point DI GS NF RLIN 2.9 0.8 dB 7.5 dBm 7.5 Noise Figure dB 6.5 Input Return Loss dB 8 0.8 10 -2 1 -4 8 11 5 20 25 RLOUT Output Return Loss dB 16 20 9 12 ISOL Isolation dB 18 23 25 30 GT Gain-Temperature Coefficient dB/C RTH Thermal Resistance (Junction to Ambient) C/W +0.002 6.5 -0.002 200 200 California Eastern Laboratories UPC2708T, UPC2711T ABSOLUTE MAXIMUM RATINGS1 (TA = 25C) VCC Supply Voltage PIN Input Power RECOMMENDED OPERATING CONDITIONS UNITS RATINGS V 6 SYMBOL dBm +10 VCC mW 280 2 PT Power Dissipation TOP Operating Temperature C -40 to +85 TSTG Storage Temperature C -55 to +150 PARAMETER UNITS MIN TYP MAX V 4.5 5.0 Supply Voltage 5.5 TEST CIRCUIT Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on 50 x 50 x 1.6 mm epoxy glass PWB (TA = +85C). D PARAMETERS VCC 1000 pF C3 UE SYMBOLS L* 1000 nH 6 50 C2 C1 50 1 IN 4 1000 pF 2, 3, 5 OUT 1000 pF IN * UPC2708T only TYPICAL PERFORMANCE CURVES (TA = 25C) CIRCUIT CURRENT vs. TEMPERATURE CIRCUIT CURRENT vs. VOLTAGE 40 40 VCC = 5.0 V 30 Circuit Current, ICC (mA) NT Circuit Current, ICC (mA) 35 UPC2708T 20 10 UPC2711T 30 UPC2708T 25 20 15 10 UPC2711T 0 0 0 1 2 3 4 5 -60 -40 6 -20 20 40 60 80 100 Supply Voltage, VCC (V) Operating Temperature, TOP (C) UPC2708T GAIN AND NOISE FIGURE vs. FREQUENCY AND VOLTAGE UPC2711T GAIN AND NOISE FIGURE vs. FREQUENCY AND VOLTAGE 20 20 9 VCC = 5.0 V VCC = 5.5 V 8 15 VCC = 4.5 V DI 7 VCC = 5.0 V 5.5 V 10 6 NF 4.5 V 0.3 8 Gp VCC = 4.5 V 7 10 5 VCC = 5.5 V 6 0 5 NF VCC = 4.5 V 5 VCC = 5.0 V -5 5 0.1 15 Gain, GS (dB) VCC = 5.5 V Gp Noise Figure, NF (dB) VCC = 5.0 V Gain, GS (dB) 0 1.0 Frequency, f (GHz) 3.0 4 0.1 0.3 1.0 Frequency, f (GHz) 3.0 Noise Figure, NF (dB) SC O 5 UPC2708T, UPC2711T TYPICAL PERFORMANCE CURVES (TA = 25C) UPC2708T INPUT RETURN LOSS, OUTPUT RETURN LOSS vs. FREQUENCY UPC2711T INPUT RETURN LOSS, OUTPUT RETURN LOSS vs. FREQUENCY 0 0 -20 RLout -30 -10 RLout -20 RLin -30 -40 -40 0.1 0.3 1.0 3.0 0.1 Frequency, f (GHz) 0.3 1.0 IN UPC2711T ISOLATION vs. FREQUENCY 0 0 VCC = 5.0 V -10 VCC = 5.0 V Isolation, ISOL (dB) NT -10 -20 -30 -20 -30 -40 SC O -40 -50 -50 0.1 0.3 1.0 0.1 3.0 0.3 1.0 UPC2708T POWER vs. FREQUENCY UPC2711T POWER vs. FREQUENCY 25 15 VCC = 5.0 V 20 VCC = 5.0 V 10 X X X DI 10 PSAT P1dB X Power (dBm) 15 PSAT 0 -10 0.5 1.0 1.5 X 0 -5 0 X 5 5 -5 3.0 Frequency, f (GHz) Frequency, f (GHz) Power (dBm) 3.0 Frequency, f (GHz) UPC2708T ISOLATION vs. FREQUENCY Isolation, ISOL (dB) D RLin UE -10 VCC = 5.0 V Input Return Loss (dB) Output Return Loss (dB) Input Return Loss (dB) Output Return Loss (dB) VCC = 5.0 V P1dB -15 2.0 2.5 3.0 3.5 Frequency, f (GHz) X: Typical SSB Third Order intercept Point 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Frequency, f (GHz) X: Typical SSB Third Order intercept Point UPC2708T, UPC2711T TYPICAL PERFORMANCE CURVES (TA = 25C) UPC2708T OUTPUT POWER vs. INPUT POWER AND TEMPERATURE UPC2711T OUTPUT POWER vs. INPUT POWER AND TEMPERATURE 5 15 TA = -25 C -40 C -5 -10 -15 -30 -25 -20 -15 -10 -5 0 -5 -20 C -10 -15 -35 5 -30 -25 -20 -15 -10 -5 0 5 Input Power, PIN (dBm) IN Input Power, PIN (dBm) UPC2708T OUTPUT POWER vs. INPUT POWER AND VOLTAGE UPC2711T OUTPUT POWER vs. INPUT POWER AND VOLTAGE 5 15 f = 1.0 GHZ 5.5 V 5.5 V f = 1.0 GHZ NT 10 5 VCC = 5.0 V 4.5 V 0 -5 -10 SC O Output Power, POUT (dBm) TA = 25 C -40 C -20 -20 -15 -20 -30 -25 -20 -15 -10 -5 0 5 Input Power, PIN (dBm) NOISE FIGURE vs. FREQUENCY 10 9 8 DI Noise Figure, NF (dB) 0 UE 0 D Output Power, Pout (dBm) 10 5 85 C VCC = 5.0 V f = 1.0 GHZ 85 C 7 UPC2708T 6 UPC2711T 5 4 0 0.5 1.0 1.5 2.0 Frequency, f (GHz) 2.5 3.0 Output Power, POUT (dBm) Output Power, Pout (dBm) f = 1.0 GHZ VCC = 5.0 V 0 VCC = 5.0 V 4.5 V -5 -10 -15 -20 -35 -30 -25 -20 -15 -10 -5 Input Power, PIN (dBm) 0 5 UPC2708T, UPC2711T TYPICAL SCATTERING PARAMETERS (TA = 25C) UPC2708T VCC = 5 V, ICC = 26 mA 0.040 0.063 0.087 0.112 0.132 0.162 0.187 0.211 0.238 0.265 0.319 0.363 0.404 0.435 0.460 0.456 0.442 0.422 0.396 0.365 ANG -3.6 30.7 41.8 47.5 49.4 49.6 47.7 45.7 44.4 40.0 32.0 23.8 15.3 6.9 -3.4 -12.6 -19.9 -26.5 -31.5 -35.3 UPC2711T VCC = 5 V, ICC = 12 mA FREQUENCY S11 MAG 0.115 0.110 0.104 0.096 0.085 0.080 0.071 0.056 0.044 0.030 0.028 0.060 0.103 0.150 0.201 0.244 0.284 0.318 0.347 0.369 0.386 0.397 5.1 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.1 5.0 4.7 4.5 4.1 3.7 3.3 2.9 ANG -3.2 -11.6 -18.5 -25.4 -32.3 -38.4 -45.3 -52.3 -59.3 -64.4 -79.1 -94.2 -109.5 -125.6 -141.1 -156.6 -172.5 172.7 158.9 146.5 MAG ANG MAG 0.073 0.072 0.071 0.070 0.069 0.068 0.067 0.066 0.065 0.064 0.063 0.061 0.060 0.060 0.060 0.060 0.060 0.060 0.059 0.059 0.2 -1.3 -3.0 -4.2 -5.6 -5.9 -6.2 -6.6 -6.6 -5.3 -5.3 -5.5 -4.9 -3.7 -0.4 -0.4 -1.8 0.2 0.1 2.0 0.132 0.138 0.139 0.140 0.142 0.144 0.147 0.150 0.153 0.157 0.165 0.171 0.176 0.168 0.156 0.141 0.123 0.100 0.077 0.051 S21 ANG -13.9 -22.1 -31.2 -41.7 -52.0 -58.8 -74.8 -88.7 -103.9 -125.2 149.4 96.8 72.8 53.6 38.3 26.8 17.2 8.4 1.8 -3.9 -8.4 -11.9 MAG 4.1 4.1 4.1 4.2 4.2 4.2 4.2 4.3 4.3 4.4 4.5 4.6 4.6 4.5 4.5 4.3 4.1 3.8 3.5 3.3 3.1 2.8 S12 ANG -5.3 -12.1 -18.3 -24.0 -29.9 -35.6 -41.3 -47.6 -54.2 -61.0 -74.4 -89.4 -104.8 -121.3 -136.9 -152.6 -167.4 178.2 165.2 152.4 140.5 129.0 DI SC O GHz 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.00 3.20 3.40 MAG K1 S22 ANG Note: 1. K factor calculations: 2 2 2 K = 1 + | | - |S11| - |S22| , = S11 S22 - S21 S12 2 |S12 S21| MAG 0.036 0.035 0.034 0.033 0.032 0.031 0.030 0.029 0.028 0.027 0.024 0.022 0.020 0.019 0.020 0.021 0.026 0.031 0.034 0.039 0.043 0.048 ANG -1.3 -2.0 -4.8 -5.1 -7.5 -8.9 -10.6 -10.7 -11.4 -13.2 -11.0 -9.9 -5.6 7.0 20.8 28.7 29.9 33.7 31.7 29.9 27.3 24.7 -11.5 -12.1 -13.1 -17.1 -19.8 -21.3 -23.6 -26.1 -28.5 -31.0 -36.1 -43.7 -50.2 -57.3 -62.5 -60.3 -61.6 -61.5 -61.6 -56.7 S22 MAG 0.098 0.103 0.106 0.116 0.126 0.142 0.150 0.160 0.173 0.187 0.211 0.233 0.250 0.259 0.264 0.261 0.244 0.222 0.198 0.175 0.163 0.162 S21 (dB) D MAG S12 1.49 1.49 1.50 1.51 1.51 1.52 1.52 1.52 1.52 1.52 1.48 1.48 1.45 1.46 1.49 1.58 1.74 1.95 2.26 2.62 14.2 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.4 14.4 14.4 14.3 14.2 13.9 13.4 13.0 12.3 11.4 10.4 9.3 K1 S21 3.34 3.44 3.54 3.63 3.70 3.82 3.87 3.94 4.03 4.13 4.47 4.75 5.11 5.38 5.08 4.94 4.16 3.70 3.58 3.35 3.25 3.14 12.3 12.3 12.3 12.4 12.4 12.4 12.6 12.7 12.8 12.8 13.1 13.2 13.2 13.1 13.0 12.6 12.2 11.6 11.0 10.4 9.7 9.1 UE GHz 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.00 S21 IN S11 NT FREQUENCY ANG -2.1 2.7 4.8 5.6 6.6 4.1 2.2 0.5 -2.6 -5.3 -13.4 -21.3 -30.2 -38.4 -46.0 -53.5 -59.5 -62.9 -62.8 -58.8 -49.0 -37.3 (dB) UPC2708T, UPC2711T EQUIVALENT CIRCUIT UPC2708T LEAD CONNECTIONS (Units in mm) (Top View) UPC2708T/UPC2711T PACKAGE OUTLINE T06 +0.2 2.8 -0.3 NT 2 2.90.2 3 0.95 4 1 1.90.2 2 0.95 4 3 5 5 2 6 6 1 5 1. INPUT 2. GND 3. GND -0.05 0.3 +0.10 SC O 1 +0.2 1.1 -0.1 (Bottom View) 4 3 +0.2 1.5 -0.1 C1D OUTLINE DIMENSIONS IN UE D UPC2711T 6 Note: Package Markings: C1D - UPC2708T C1G - UPC2711T 4. OUTPUT 5. GND 6. VCC 0.130.1 0.8 RECOMMENDED P.C.B. LAYOUT (Units in mm) 0 to 0.1 3.10 Note: All dimensions are typical unless otherwise specified. ORDERING INFORMATION QTY UPC2708T-E3 3K/Reel UPC2711T-E3 3K/Reel 4 2 DI PART NUMBER 3 0.95 5 1 6 0.5 MIN *Embossed Tape, 8 mm wide. 1.0 MIN 1.0 MIN EXCLUSIVE AGENT FOR NEC Corporation RF & MICROWAVE SEMICONDUCTOR PRODUCTS - U.S. & CANADA CALIFORNIA EASTERN LABORATORIES, INC * DATA SUBJECT TO CHANGE WITHOUT NOTICE Headquarters * 4590 Patrick Henry Drive * Santa Clara, CA 95054-1817 * (408) 988-3500 * Telex 34-6393/FAX (408) 988-0279 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: CEL: UPB1508GV-EVAL-A