MEMSIC MXA2500EL-B Prototyping Board User's Guide Page 1of 1 Rev A
MXA2500EL-B Prototyping Board
MXA2500EL-B
GENERAL DESCRIPTION
The MXA2500EL-B provides a convenient and easy way to
evaluate and prototype with the MXA2500EL dual axes
accelerometer. The accelerometer and passive components
are SMT mounted on the board. Each pin of the
MXA2500EL SMT device is brought out to standard 0.10
inch on center connections on the sides of the prototyping
board. Wires can either be soldered directly to the
prototyping board or the DIP pins can be used with widely
available breadboard kits.
For complete performance specifications of the
MXA2500EL refer to the MXA2500EL datasheet.
PIN DESCRIPTION
Pin Name Description
P1-1 VDD 3V to 5.25 V
P1-2 Xout X-Axis Acceleration Signal
P1-3 Yout Y-Axis Acceleration Signal
P1-4 GND Ground
P2-1 Tout Temperature (Analog Voltage)
P2-2 NC No Connect
P2-3 NC No Connect
P2-4 Vref 2.5V Reference Output
SCHEMATIC OF THE MXA2500EL-B
MXA2500EL-B
MXA2500EL-B
PCB CONNECTION DIMENSIONS
MXA2500EL-B
Information furnished by MEMSIC is believed to be accurate and reliable.
However, no responsibility is assumed by MEMSIC for its use, nor for any
infringements of patents or other rights of third parties, which may result from
its use. No license is granted by implication or otherwise under any patent or
patent rights of MEMSIC.
MEMSIC, Inc.
One Technology Drive, Suite 325, Andover, MA, 01810, USA
Tel: +1 978 738 0900 Fax: +1 978 738 0196
www.memsic.com
