REF3112 REF3120 REF3125 REF3130 REF3133 REF3140 SBVS046C - DECEMBER 2003 - REVISED FEBRUARY 2006 15ppm/C Max, 100A, SOT23-3 SERIES VOLTAGE REFERENCE FEATURES DESCRIPTION MicroSIZE PACKAGE: SOT23-3 The REF31xx is a family of precision, low power, low dropout, series voltage references available in the tiny SOT23-3 package. LOW DROPOUT: 5mV HIGH OUTPUT CURRENT: 10mA HIGH ACCURACY: 0.2% max LOW IQ: 115A max EXCELLENT SPECIFIED DRIFT PERFORMANCE: 15ppm/C (max) from 0C to +70C 20ppm/C (max) from -40C to +125C The REF31xx's small size and low power consumption (100A typ) make it ideal for portable and battery-powered applications. The REF31xx does not require a load capacitor, but is stable with any capacitive load and can sink/source up to 10mA of output current. Unloaded, the REF31xx can be operated on supplies down to 5mV above the output voltage. All models are specified for the wide temperature range of -40C to +125C. APPLICATIONS PORTABLE, BATTERY-POWERED EQUIPMENT PRODUCT VOLTAGE (V) REF3112 1.25 REF3120 2.048 MEDICAL EQUIPMENT REF3125 2.5 HAND-HELD TEST EQUIPMENT REF3130 3.0 DATA ACQUISITION SYSTEMS IN OUT 1 2 REF3112 REF3120 REF3125 REF3130 REF3133 REF3140 3 REF3133 3.3 REF3140 4.096 GND SOT23-3 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. Copyright (c) 2003-2006, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. www.ti.com ABSOLUTE MAXIMUM RATINGS(1) ELECTROSTATIC DISCHARGE SENSITIVITY Supply Voltage, V+ to V- ................................................................... 7.0V Output Short-Circuit ................................................................. Continuous Operating Temperature .................................................. -55C to +135C This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. Storage Temperature ..................................................... -65C to +150C Junction Temperature .................................................................... +150C NOTES: (1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these, or any other conditions beyond those specified, is not implied. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. PACKAGE/ORDERING INFORMATION(1) PRODUCT REF3112 " REF3120 " REF3125 " REF3130 " REF3133 " REF3140 " PACKAGE-LEAD PACKAGE DESIGNATOR SPECIFIED TEMPERATURE RANGE PACKAGE MARKING ORDERING NUMBER TRANSPORT MEDIA, QUANTITY SOT23-3 DBZ -40C to +125C R31A " " " " REF3112AIDBZT REF3112AIDBZR Tape and Reel, 250 Tape and Reel, 3000 SOT23-3 DBZ -40C to +125C R31B " " " " REF3120AIDBZT REF3120AIDBZR Tape and Reel, 250 Tape and Reel, 3000 SOT23-3 DBZ -40C to +125C R31C " " " " REF3125AIDBZT REF3125AIDBZR Tape and Reel, 250 Tape and Reel, 3000 SOT23-3 DBZ -40C to +125C R31E " " " " REF3130AIDBZT REF3130AIDBZR Tape and Reel, 250 Tape and Reel, 3000 SOT23-3 DBZ -40C to +125C R31F " " " " REF3133AIDBZT REF3133AIDBZR Tape and Reel, 250 Tape and Reel, 3000 SOT23-3 DBZ -40C to +125C R31D " " " " REF3140AIDBZT REF3140AIDBZR Tape and Reel, 250 Tape and Reel, 3000 NOTE: (1) (1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. ELECTRICAL CHARACTERISTICS Boldface limits apply over the specified temperature range, TA = -40C to +125C. At TA = +25C, ILOAD = 0mA, VIN = 5V, unless otherwise noted. REF31xx PARAMETER CONDITIONS MIN TYP MAX UNITS 1.2475 -0.2 1.25 1.2525 0.2 V % REF3112(1) - 1.25V OUTPUT VOLTAGE Initial Accuracy VOUT NOISE Output Voltage Noise Voltage Noise f = 0.1Hz to 10Hz f = 10Hz to 10kHz VPP Vrms 17 24 REF3120 - 2.048 OUTPUT VOLTAGE Initial Accuracy VOUT NOISE Output Voltage Noise Voltage Noise 2.0439 -0.2 f = 0.1Hz to 10Hz f = 10Hz to 10kHz 2.048 2.0521 0.2 V % VPP Vrms 27 39 REF3125 - 2.5V OUTPUT VOLTAGE Initial Accuracy NOISE Output Voltage Noise Voltage Noise 2 VOUT 2.4950 -0.2 f = 0.1Hz to 10Hz f = 10Hz to 10kHz 2.50 33 48 2.5050 0.2 V % VPP Vrms REF3112, 3120, 3125, 3130, 3133, 3140 www.ti.com SBVS046C ELECTRICAL CHARACTERISTICS Boldface limits apply over the specified temperature range, TA = -40C to +125C. At TA = +25C, ILOAD = 0mA, VIN = +5V, unless otherwise noted. REF31xx PARAMETER CONDITIONS MIN TYP MAX UNITS 2.9940 -0.2 3.0 3.0060 0.2 V % REF3130 - 3.0V OUTPUT VOLTAGE Initial Accuracy VOUT NOISE Output Voltage Noise Voltage Noise f = 0.1Hz to 10Hz f = 10Hz to 10kHz VPP Vrms 39 57 REF3133 - 3.3V OUTPUT VOLTAGE Initial Accuracy VOUT 3.2934 -0.2 NOISE Output Voltage Noise Voltage Noise f = 0.1Hz to 10Hz f = 10Hz to 10kHz 3.30 3.3066 0.2 V % VPP Vrms 43 63 REF3140 - 4.096V OUTPUT VOLTAGE Initial Accuracy VOUT 4.0878 -0.2 NOISE Output Voltage Noise Voltage Noise f = 0.1Hz to 10Hz f = 10Hz to 10kHz 4.096 4.1042 0.2 V % VPP Vrms 53 78 REF3112, REF3120, REF3125, REF3130, REF3133, REF3140 OUTPUT VOLTAGE TEMP DRIFT(2) dVOUT/dT 0C TA +70C -40C TA +125C 5 10 15 20 ppm/C ppm/C 0-1000h VREF + 0.05(1) VIN 5.5V 70 20 65 ppm ppm/V 0mA < ILOAD < 10mA, VIN = VREF + 250mV(1) -10mA < ILOAD < 0mA, VIN = VREF + 100mV(1) 10 30 V/mA 20 50 V/mA LONG-TERM STABILITY LINE REGULATION LOAD REGULATION(3) Sourcing dVOUT/dILOAD Sinking THERMAL HYSTERESIS(4) First Cycle Additional Cycles DROPOUT VOLTAGE(1) OUTPUT CURRENT SHORT-CIRCUIT CURRENT Sourcing Sinking dT 100 25 VIN - VOUT ILOAD TEMPERATURE RANGE Specified Range Operating Range Storage Range Thermal Resistance SOT23-3 Surface-Mount NOTES: (1) (2) (3) (4) (5) -10 to 0.1% at VIN = +5V with CL = 0 mV 10 mA 50 40 mA mA 400 s IL = 0 VREF + 0.05(1) VS IQ 100 115 -40 -55 -65 JA 336 5.5 115 135 V A A +125 +135 +150 C C C C/W Minimum supply voltage for REF3112 is 1.8V. Box Method used to determine temperature drift. Typical value of load regulation reflects measurements using force and sense contacts; see the Load Regulation section. Thermal hysteresis is explained in more detail in the Applications Information section of this data sheet. For IL > 0, see the Typical Characteristic curves. REF3112, 3120, 3125, 3130, 3133, 3140 SBVS046C 50 ISC TURN-ON SETTLING TIME POWER SUPPLY Voltage Quiescent Current Over Temperature 5 ppm ppm 3 www.ti.com TYPICAL CHARACTERISTICS At TA = +25C, VIN = +5V power supply, REF3125 is used for typical characteristics, unless otherwise noted. TEMPERATURE DRIFT (0C to +70C) TEMPERATURE DRIFT (-40C to +125C) 18 25 20 14 Percentage of Units Percentage of Units 16 12 10 8 6 4 15 10 5 2 0 0 0 1 2 3 4 5 6 8 9 10 11 12 13 14 15 16 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Drift (ppm/C) Drift (ppm/C) DROPOUT VOLTAGE vs LOAD CURRENT OUTPUT VOLTAGE vs TEMPERATURE 120 0.16 0.14 100 Dropout Voltage (mV) 0.12 Output Drift (%) 0.10 0.08 0.06 0.04 0.02 0 80 60 40 20 -0.02 -0.04 0 -60 -40 -20 0 20 40 60 80 -15 100 120 140 -10 -5 0 5 10 15 Load Current (mA) Temperature (C) QUIESCENT CURRENT vs TEMPERATURE OUTPUT IMPEDANCE vs FREQUENCY 120 100 Output Resistance () Quiescent Current (A) 100 80 60 40 10 1 0.1 20 0 0.01 -60 -40 -20 0 20 40 60 80 100 120 140 Temperature (C) 4 1 10 100 1k 10k 100k 1M Frequency (Hz) REF3112, 3120, 3125, 3130, 3133, 3140 www.ti.com SBVS046C TYPICAL CHARACTERISTICS (Cont.) At TA = +25C, VIN = +5V power supply, REF3125 is used for typical characteristics, unless otherwise noted. PSRR vs FREQUENCY OUTPUT vs SUPPLY 2.505 +125C 80 2.504 70 2.503 60 Output (V) Power-Supply Rejection Ratio (dB) 90 50 40 30 2.502 2.501 +25C 2.500 20 -40C 2.499 10 2.498 0 1 10 100 1k 10k 100k 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Frequency (Hz) Supply (V) OUTPUT VOLTAGE vs LOAD CURRENT STEP RESPONSE, CL = 0, 5V STARTUP 6.0 6.5 2.505 5V/div Output Voltage (V) 2.503 VIN 1V/div +125C 2.504 VOUT 2.502 2.501 +25C 2.500 -40C 2.499 2.498 2.497 -15 -10 -5 0 5 10 15 100s/div Load Current (mA) REF3112 LONG TERM STABILITY 0.1Hz TO 10Hz NOISE 20 0 10V/div Drift (ppm) -20 -40 -60 -80 -100 -120 400ms/div 0 100 200 300 400 500 600 700 800 900 1000 Time (Hrs) REF3112, 3120, 3125, 3130, 3133, 3140 SBVS046C 5 www.ti.com TYPICAL CHARACTERISTICS (Cont.) At TA = +25C, VIN = +5V power supply, REF3125 is used for typical characteristics, unless otherwise noted. 500mV/div LINE TRANSIENT CL = 10F VIN VIN VOUT 20mV/div 20mV/div 500mV/div LINE TRANSIENT CL = 0pF ILOAD VOUT 20s/div 100s/div LOAD TRANSIENT CL = 0pF, 10mA OUTPUT PULSE LOAD TRANSIENT CL = 1F, 10mA OUTPUT PULSE +10mA ILOAD +10mA -10mA -10mA VOUT 50mV/div 200mV/div +10mA +10mA VIN VOUT 40s/div 40s/div LOAD TRANSIENT CL = 0pF, 1mA OUTPUT PULSE LOAD TRANSIENT CL = 1F, 1mA OUTPUT PULSE +1mA +1mA VIN -1mA +1mA +1mA -1mA 20mV/div 100mV/div VOUT 40s/div 6 VOUT 40s/div REF3112, 3120, 3125, 3130, 3133, 3140 www.ti.com SBVS046C The REF31xx is a family of series, CMOS, precision bandgap voltage references. The basic bandgap topology is shown in Figure 1. Transistors Q1 and Q2 are biased such that the current density of Q1 is greater than that of Q2. The difference of the two base-emitter voltages, Vbe1 - Vbe2, has a positive temperature coefficient and is forced across resistor R1. This voltage is gained up and added to the base-emitter voltage of Q2, which has a negative temperature coefficient. The resulting output voltage is virtually independent of temperature. 100A, and the maximum quiescent current over temperature is just 135A. The quiescent current typically changes less than 2A over the entire supply range, as shown in Figure 3. QUIESCENT CURRENT vs POWER SUPPLY 100.5 Quiescent Current (A) THEORY OF OPERATION 100.0 99.5 99.0 98.5 VBANDGAP 98.0 1.5 + + Vbe1 Vbe2 - Q1 I 2.5 3.5 4.5 5.5 Power Supply (V) R1 - FIGURE 3. Supply Current vs Supply Voltage. N Q2 FIGURE 1. Simplified Schematic of Bandgap Reference. APPLICATION INFORMATION Supply voltages below the specified levels can cause the REF31xx to momentarily draw currents greater than the typical quiescent current. This can be prevented by using a power supply with a fast rising edge and low output impedance. THERMAL HYSTERESIS The REF31xx does not require a load capacitor and is stable with any capacitive load. Figure 2 shows typical connections required for operation of the REF31xx. A supply bypass capacitor of 0.47F is recommended. Thermal hysteresis for the REF31xx is defined as the change in output voltage after operating the device at 25C, cycling the device through the specified temperature range, and returning to 25C. It can be expressed as: abs VPRE - VPOST 6 VHYST = * 10 (ppm) VNOM VIN Where: VHYST = Thermal hysteresis 1 0.47F VOUT REF31xx VPRE = Output voltage measured at 25C pretemperature cycling 3 VPOST = Output voltage measured after the device has been cycled through the specified temperature range of -40C to +125C and returned to 25C. 2 TEMPERATURE DRIFT FIGURE 2. Typical Connections for Operating REF31xx. SUPPLY VOLTAGE The REF31xx family of references features an extremely low dropout voltage. With the exception of the REF3112, which has a minimum supply requirement of 1.8V, these references can be operated with a supply of only 5mV above the output voltage in an unloaded condition. For loaded conditions, a typical dropout voltage versus load is shown in the typical curves. The REF31xx features a low quiescent current, which is extremely stable over changes in both temperature and supply. The typical room temperature quiescent current is The REF31xx is designed to exhibit minimal drift error, defined as the change in output voltage over varying temperature. The drift is calculated using the "box" method which is described by the following equation: VOUTMAX - VOUTMIN 6 V * 10 ppm * TemperatureRange OUT The REF31xx features a typical drift coefficient of 5ppm from 0C to 70C--the primary temperature range for many applications. For the industrial temperature range of -40C to 125C, the REF31xx family drift increases to a typical value of 10ppm. REF3112, 3120, 3125, 3130, 3133, 3140 SBVS046C 7 www.ti.com APPLICATION CIRCUITS NOISE PERFORMANCE Typical 0.1Hz to 10Hz voltage noise can be seen in the Typical Characteristic Curve, 0.1 to 10Hz Voltage Noise. The noise voltage of the REF31xx increases with output voltage and operating temperature. Additional filtering may be used to improve output noise levels, although care should be taken to ensure the output impedance does not degrade the AC performance. LONG-TERM STABILITY Long-term stability refers to the change of the output voltage of a reference over a period of months or years. This effect lessens as time progresses, as is shown by the long-term stability curves. The typical drift value for the REF31xx is 70ppm from 0-1000 hours. This parameter is characterized by measuring 30 units at regular intervals for a period of 1000 hours. Negative Reference Voltage For applications requiring a negative and positive reference voltage, the REF31xx and OPA703 can be used to provide a dual supply reference from a 5V supply. Figure 5 shows the REF3125 used to provide a 2.5V supply reference voltage. The low drift performance of the REF31xx complement the low offset voltage and low drift of the OPA703 to provide an accurate solution for split-supply applications. +5V +2.5V REF3125 LOAD REGULATION 10k 10k Load regulation is defined as the change in output voltage due to changes in load current. The load regulation of the REF31xx is measured using force and sense contacts as pictured in Figure 4. The force and sense lines reduce the impact of contact and trace resistance, resulting in accurate measurement of the load regulation contributed solely by the REF31xx. For applications requiring improved load regulation, force and sense lines should be used. +5V OPA703 -2.5V -5V FIGURE 5. REF3125 Combined with OPA703 to Create Positive and Negative Reference Voltages. Output Pin Contact and Trace Resistance + VOUT - Force Line IL Sense Line Load DATA ACQUISITION Data acquisition systems often require stable voltage references to maintain accuracy. The REF31xx family features stability and a wide range of voltages suitable for most microcontrollers and data converters. Figure 6, Figure 7, and Figure 8 show basic data acquisition systems. Meter FIGURE 4. Accurate Load Regulation of REF31xx. 8 REF3112, 3120, 3125, 3130, 3133, 3140 www.ti.com SBVS046C 3.3V REF3133 V+ 5 GND + 1F to 10F VS ADS7822 VREF VCC + 0.1F VIN +In CS -In DOUT GND 1F to 10F Microcontroller DCLOCK FIGURE 6. Basic Data Acquisition System 1. 2.5V Supply 5 2.5V + VIN VS ADS8324 REF3112 VOUT = 1.25V VREF VCC + 0.1F 0V to 1.25V GND 1F to 10F +In CS -In DOUT GND 1F to 10F Microcontroller DCLOCK FIGURE 7. Basic Data Acquisition System 2. 5V REF3140 0.1F 1F VOUT = 4.096V 1k 10 22F +5V 1k VIN VREF 10 ADS8381 THS4031 6800pF 0.22F 500 -5V FIGURE 8. REF3140 Provides an Accurate Reference for Driving the ADS8381. REF3112, 3120, 3125, 3130, 3133, 3140 SBVS046C 9 www.ti.com PACKAGE OPTION ADDENDUM www.ti.com 11-Dec-2006 PACKAGING INFORMATION (1) Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty REF3112AIDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3112AIDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3112AIDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3112AIDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3120AIDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3120AIDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3120AIDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3120AIDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3125AIDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3125AIDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3125AIDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3125AIDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3130AIDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3130AIDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3130AIDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3130AIDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3133AIDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3133AIDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3133AIDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3133AIDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3140AIDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3140AIDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3140AIDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM REF3140AIDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM The marketing status values are defined as follows: Addendum-Page 1 Lead/Ball Finish MSL Peak Temp (3) PACKAGE OPTION ADDENDUM www.ti.com 11-Dec-2006 ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 13-Aug-2011 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) REF3112AIDBZR SOT-23 DBZ 3 3000 179.0 8.4 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 3.15 2.95 1.22 4.0 8.0 Q3 REF3112AIDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 REF3120AIDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 REF3120AIDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 REF3125AIDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 REF3125AIDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 REF3130AIDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 REF3130AIDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 REF3133AIDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 REF3133AIDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 REF3140AIDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 REF3140AIDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 13-Aug-2011 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) REF3112AIDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 REF3112AIDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 REF3120AIDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 REF3120AIDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 REF3125AIDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 REF3125AIDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 REF3130AIDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 REF3130AIDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 REF3133AIDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 REF3133AIDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 REF3140AIDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 REF3140AIDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP(R) Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com Wireless www.ti.com/wireless-apps RF/IF and ZigBee(R) Solutions www.ti.com/lprf TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2011, Texas Instruments Incorporated