SENSITRON M(R) – 1W/2W Series
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 1106, REV. B
DC-DC Converters
Fixed Input, 1000V Isolation, Regulated, Dual Output
FEATURES:
• Isolation Voltage: 1000Vdc
• Isolation Resistance (1): 1000MΩ
• Short-Circuit Duration: 1 second
• Case Temperature Rise: Max. 25°C, Typ. 15°C
• Cooling Method: Free-Air Cooling
• Standby Power Dissipation: 1W (100mW), 2W (200mW)
• Operating Temp.: -40°C ~ + 85°C
• Storage Temp.: -55°C ~ + 125°C
• Humidity: ≤ 95%
• Soldering Temp. (2): 300°C
• Case Material: Non-Flammable Material (UL94-V0)
• Mean Time Before Failure: > 1,000,000 hours (Operating Temp. 25°C)
M(R) Dual Output-1W/2W Series Input Characteristics
Part Number Nominal Input Voltage Input Voltage Range Maximum Input Voltage*
M05XXGS1/2 5Vdc 4.75~5.25Vdc 5.5Vdc
M12XXGS1/2 12Vdc 11.4~12.4Vdc 13.2Vdc
M24XXGS1/2 24Vdc 22.8~25.2Vdc 26.4Vdc
* Voltage above this value may cause permanent damage to the device.
M(R) Dual Output-1W/2W Series Output Characteristics
Parameter MIN TYP MAX Units
1W Output Power 1 W
2W Output Power 2 W
Line Regulation 0.25 %
Load Regulation 0.3 %
Output Voltage Accuracy ± 1 %
Efficiency at 100% Load 55 60 70 %
Temperature Coefficient 0.03 %/°C
1W Ripple 5 10 mVp-p
1W Noise 50 100 mVp-p
Switching Frequency 80 100 150 kHz
1. All specifications at TA=25°C, 75% of the humidity, Nominal input voltage, full output load unless otherwise
specified.
2. Soldering for 10 seconds at 1.5mm away from the edge.
• 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 •
• World Wide Web Site - http://www.s ensitron.com • E-Mail Address - sales@sensitron.com •
SENSITRON M(R) – 1W/2W Series
SEM ICONDUCTOR
TECHNICAL DATA
DATA SHEET 1106, REV. B
M(R) Dual Output-1W/2W Series Part Number List
Input Output Power SIP-1W SIP-2W
M0505GS1 M0505GS2
M0509GS1 M0509GS2
M0512GS1 M0512GS2
5Vdc
M0515GS1 M0515GS2
M1205GS1 M1205GS2
M1209GS1 M1209GS2
M1212GS1 M1212GS2
12Vdc
M1215GS1 M1215GS2
M2405GS1 M2405GS2
M2409GS1 M2409GS2
M2412GS1 M2412GS2
24Vdc
±5V/100m A
±9V/55m A
±12V/42m A
±15V/33m A
±5V/150m A
±9V/100m A
±12V/83m A
±15V/67m A
0.75W
0.90W
1.00W
1.00W
1.50W
2.00W
2.00W
2.00W
M2415GS1 M2415GS2
PIN CONFIGURATION
MxxyyGS1/2
• 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 •
• World Wide Web Site - http://www.s ensitron.com • E-Mail Address - sales@sensitron.com •
• 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 •
• World Wide Web Site - http://www.s ensitron.com • E-Mail Address - sales@sensitron.com •
SENSITRON M(R) - 1W/2W Series
SEM ICONDUCTOR
TECHNICAL DATA
DATA SHEET 1106, REV. B
Mechanical Dimension: in inches / (mm)
MxxyyGS1/2 PACKAGE DIMENSIONS
27.50± 0.15
12.00± 0.15
4.10± 0.10
1.25± 0.10
2.32± 0.10 22.86± 0.15
9.50± 0.15
109712
DIMENSIONAL RECOMMENDATIONS FOR PCB LAYOUT
SIP PACKAGE DIMENSIONS
• 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 •
• World Wide Web Site - http://www.s ensitron.com • E-Mail Address - sales@sensitron.com •
SENSITRON
SEM ICONDUCTOR
TECHNICAL DATA
DATA SHEET 1106, REV. B
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior not ice to
improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales
department for the latest version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation,
traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices
that feature assured safety or by means of users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other
cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no
responsibility for any intellectual property claims or any other problems that may result from applications of information,
products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage
resulting from use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron
Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed writ ten
permission of Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their
application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their
direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be
taken in accordance with related laws and regulations.
M(R) - 1W/2W Series
