PE42823 Document Category: Product Specification UltraCMOS(R) SPDT RF Switch, 700 MHz-6 GHz Features Figure 1 * PE42823 Functional Diagram * Excellent single-event peak power handling of 51 dBm LTE ANT (RFC) * Exceptional linearity performance across all frequencies Input IP3: 70 dBm Input IP2: 105 dBm R RX ((RF2) R TX (RF1) * Extended operating temperature of +105 C * 1.8V/3.3V TTL compatible control * High ESD performance of 4.5 kV HBM on RF pins to ground * Packaging - 16-lead 3 x 3 x 0.75 mm QFN CMOS Control Driver and ESD CTRL Applications VDD * 4G/4.5G wireless infrastructures * Pre-5G/5G massive MIMO systems * TDD-based RF transceivers Product Description The PE42823 is a HaRPTM technology-enhanced 50 SPDT RF protection switch designed for use in high power and high performance wireless infrastructure applications such as macrocells supporting frequencies up to 6 GHz. This switch features high linearity, which remains invariant across the full supply range. The PE42823 also features exceptional isolation, fast switching time and is offered in a 16-lead 3 x 3 x 0.75 mm QFN package. In addition, no external blocking capacitors are required if 0 VDC is present on the RF ports. The PE42823 is manufactured on Peregrine's UltraCMOS(R) process, a patented advanced form of silicon-oninsulator (SOI) technology. Peregrine's HaRP technology enhancements deliver high linearity and excellent harmonics performance. It is an innovative feature of the UltraCMOS process, offering the performance of GaAs with the economy and integration of conventional CMOS. (c)2015 - 2017, Peregrine Semiconductor Corporation. All rights reserved. * Headquarters: 9380 Carroll Park Drive, San Diego, CA, 92121 Product Specification DOC-67417-4 - (05/2017) www.psemi.com PE42823 SPDT RF Switch Absolute Maximum Ratings Exceeding absolute maximum ratings listed in Table 1 may cause permanent damage. Operation should be restricted to the limits in Table 2. Operation between operating range maximum and absolute maximum for extended periods may reduce reliability. ESD Precautions When handling this UltraCMOS device, observe the same precautions as with any other ESD-sensitive devices. Although this device contains circuitry to protect it from damage due to ESD, precautions should be taken to avoid exceeding the rating specified in Table 1. Latch-up Immunity Unlike conventional CMOS devices, UltraCMOS devices are immune to latch-up. Table 1 * Absolute Maximum Ratings for PE42823 Parameter Condition Min Typ Max Unit Power supply voltage -0.3 5.5 V Voltage on CTRL input -0.3 3.6 V Voltage on LS input -0.3 3.6 V Storage temperature range -65 150 C 43 dBm 42.5 dBm 42 dBm 4500 V 4000 V 1250 V Input power, avg: 700 -1800 MHz 1801-3800 MHz Tx mode, 10-second duration, 8dB PAR LTE signal No power applied to offterminated port. No hot switching. 3801-6000MHz ESD voltage HBM: RF pins to GND Human body model (MIL-STD 883 Method 3015). All pins ESD voltage CDM, all pins Charged device model (JEDEC JESD22-C101). Page 2 DOC-67417-4 - (05/2017) www.psemi.com PE42823 SPDT RF Switch Recommended Operating Conditions Table 2 lists the recommending operating conditions for the PE42823. Devices should not be operated outside the recommended operating conditions listed below. Table 2 * Recommended Operating Conditions for PE42823 Parameter Min Power supply voltage Typ 2.3 Power supply current 120 Max Unit 5.5 V 200 A Control voltage high 1.17 3.6 V Control voltage low -0.3 0.6 V 10 A +105 C Control current Operating temperature range -40 DOC-67417-4 - (05/2017) +25 Page 3 www.psemi.com PE42823 SPDT RF Switch Electrical Specifications Table 3 provides the PE42823 key electrical specifications @ +25 C, VDD = 2.3-5.5V, unless otherwise specified. Table 3 * PE42823 Electrical Specifications Parameter Path Condition Operational frequency Min Typ 700 Max Unit 6000 MHz ANT-RX 700 MHz 2100 MHz 2700 MHz 3800 MHz 6000 MHz 0.39 0.51 0.55 0.68 1.28 0.50 0.60 0.70 0.85 1.80 dB dB dB dB dB ANT-TX 700 MHz 2100 MHz 2700 MHz 3800 MHz 6000 MHz 0.25 0.33 0.36 0.41 0.53 0.35 0.45 0.50 0.60 0.80 dB dB dB dB dB ANT-RX 700 MHz 2100 MHz 2700 MHz 3800 MHz 6000 MHz 58 46 42 37 30 59 47 43 38 31 dB dB dB dB dB ANT-TX 700 MHz 2100 MHz 2700 MHz 3800 MHz 6000 MHz 47 36 33 28 22 48 37 34 29 23 dB dB dB dB dB ANT-RX 700-2700 MHz 2701-3800 MHz 3800-6000 MHz 24 17 12 dB dB dB ANT-TX 700-2700 MHz 2701-3800 MHz 3800-6000 MHz 26 26 28 dB dB dB Input 1dB compression ANT-TX 700-3800 MHz 3801-6000 MHz 46 43 dBm dBm Input IP3 ANT-RX 70 dBm Input IP2 ANT-RX 105 dBm Insertion loss Isolation Return loss Max RF input power Tx mode Continuous Wave, -40C to 105C 38.5 dBm Rx mode Continuous Wave, -40C to 105C 33 dBm Settling time 50% CTRL to 0.05 dB final value (-40C to +105C) Rising Edge 2 s Settling time 50% CTRL to 0.05 dB final value (-40C to +105C) Falling Edge 0.58 s ANT-RX 50% CTRL to 90% or 10% of final value 0.84 s ANT-TX 50% CTRL to 90% or 10% of final value 0.62 s Switching time Page 4 DOC-67417-4 - (05/2017) www.psemi.com PE42823 SPDT RF Switch Control Logic Table 5 * Pin Descriptions for PE42823 Table 4 provides the control logic truth table for the PE42823. Table 4 * Truth Table for PE42823 Pin No. Pin Name GND Description CTRL ANT-TX ANT-RX 1, 3, 4, 5, 6, 8, 9, 10, 12, 13 0 OFF ON 2 TX 1 ON OFF 7 ANT ANT RF port. 11 RX RX RF port. 14 CTRL 15 NC NC 16 VDD Positive power supply voltage. Pin Information This section provides pinout information for the PE42823. Figure 2 shows the pin map of this device for the available package. Table 5 provides a description for each pin. GND 1 TX 2 GND GND VDD NC CTRL GND 15 14 13 Pin 1 Dot Marking 16 Figure 2 * Pin Configuration (Top View) 12 GND 11 RX 3 10 GND 4 9 GND 5 6 7 8 GND GND ANT GND Exposed Ground Pad Ground. TX RF port. Digital control logic input. Note: * RF pins 2, 7 and 11 must be at 0 VDC. The RF pins do not require DC blocking capacitors for proper operation if the 0 VDC requirement is met. DOC-67417-4 - (05/2017) Page 5 www.psemi.com PE42823 SPDT RF Switch Figure 3 * Insertion Loss vs Temp (RF1) Figure 6 * Insertion Loss vs VDD (RF2) 0 -0.2 Inseron Loss (dB) Inseron Loss (dB) -0.4 -0.6 -0.8 -1 -1.2 -1.4 -1.6 -1.8 0 -0.2 -0.4 -0.6 -0.8 -1 -1.2 -1.4 -1.6 -1.8 -2 0.5 -2 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Frequency (GHz) +25C +85C -40C 5 5.5 2 2.5 3 3.5 4 4.5 5 5.5 6 Frequency (GHz) 2.3V 3.3V 5.5V Figure 7 * RFC Port Return Loss vs Temp (RF1) 0 -0.2 -0.4 -0.6 -0.8 -1 -1.2 -1.4 -1.6 -1.8 -2 0 Return Loss (dB) -10 -20 -30 -40 -50 -60 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 0.5 6 1 3.3V 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 Frequency (GHz) Frequency (GHz) 2.3V -40C 5.5V +25C +85C +105C Figure 8 * RFC Port Return Loss vs Temp (RF2) Figure 5 * Insertion Loss vs Temp (RF2) 0 -0.2 -0.4 -0.6 -0.8 -1 -1.2 -1.4 -1.6 -1.8 -2 0 -10 Return Loss (dB) Inseron Loss (dB) 1.5 +105C Figure 4 * Insertion Loss vs VDD (RF1) Inseron Loss (dB) 1 6 -20 -30 -40 -50 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 -60 6 0.5 1 1.5 Frequency (GHz) -40C +25C +85C 2 2.5 3 3.5 4 4.5 5 5.5 6 Frequency (GHz) -40C +105C Page 6 +25C +85C +105C DOC-67417-4 - (05/2017) www.psemi.com PE42823 SPDT RF Switch Figure 9 * Isolation vs Temp (RF1-RF2, RF1 Active) Figure 11 * Isolation vs Temp (RFC-RF1, RF2 Active) -10 -20 Isola on (dB) Isola on (dB) 0 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -30 -40 -50 -60 -70 -80 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 -90 6 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 Frequency (GHz) -40C +25C +85C +105C -40C Frequency (GHz) +25C +85C +105C Figure 10 * Isolation vs Temp (RF2-RF1, RF2 Active) 0 -10 Isola on (dB) -20 -30 -40 -50 -60 -70 -80 -90 0.5 1 1.5 -40C 2 2.5 3 3.5 4 Frequency (GHz) +25C +85C 4.5 5 5.5 6 +105C DOC-67417-4 - (05/2017) Page 7 www.psemi.com PE42823 SPDT RF Switch Evaluation Board Figure 12 * Evaluation Kit Layout for PE42823 J1 RFC J3 RF1 R7 C1 R5 C2 C3 R4 C4 R6 LS VDD GND VSS/GND U1 DGND 3X3 16L QFN SPDT J2 RF2 R2 R1 R3 J4 J5 J6 THRU PRT-30188-02 Page 8 DOC-67417-4 - (05/2017) www.psemi.com PE42823 SPDT RF Switch Packaging Information This section provides packaging data including the moisture sensitivity level, package drawing, package marking and tape-and-reel information. Moisture Sensitivity Level The moisture sensitivity level rating for the PE42823 in the 16-lead 3 x 3 x 0.75 mm QFN package is MSL1. Package Drawing Figure 13 * Package Mechanical Drawing for 16-lead 3 x 3 x0.75 mm QFN 0.30 (x16) 0.10 C A 3.00 1.800.05 (2X) B 0.50 (x12) 0.50 (x12) 0.55 (x16) 12 9 13 8 3.00 1.800.05 1.85 0.250.05 (x16) 16 5 0.10 C 4 1 (2X) 1.50 REF PIN #1 CORNER BOTTOM VIEW TOP VIEW 3.40 0.10 C 0.10 0.05 0.750.05 0.05 C 0.350.05 (x16) 1.85 3.40 RECOMMENDED LAND PATTERN C A B C ALL FEATURES SEATING PLANE 0.203 REF SIDE VIEW 0.05 REF C Top-Marking Specification Figure 14 * Package Marking Specifications for PE42823 42823 YYWW ZZZZZZ = Pin 1 indicator YY = Last two digits of assembly year WW = Assembly work week ZZZZZZ = Assembly lot code (maximum six characters) DOC-67417-4 - (05/2017) Page 9 www.psemi.com PE42823 SPDT RF Switch Tape and Reel Specification Figure 15 * Tape and Reel Specifications for 16-lead 3 x 3 x 0.75 mm QFN Direction of Feed Section A-A P1 P0 see note 1 T P2 see note 3 D1 D0 A E F see note 3 B0 A0 K0 A W0 Notes: A0 B0 K0 D0 D1 E F P0 P1 P2 T W0 3.30 3.30 1.10 1.50 + 0.1/ -0.0 1.5 min 1.75 0.10 5.50 0.05 4.00 8.00 2.00 0.05 0.30 0.05 12.00 0.3 1. 10 Sprocket hole pitch cumulative tolerance 0.2 2. Camber in compliance with EIA 481 3. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole Pin 1 Device Orientation in Tape Page 10 DOC-67417-4 - (05/2017) www.psemi.com PE42823 SPDT RF Switch Ordering Information Table 6 lists the available ordering codes for the PE42823 as well as available shipping methods. Table 6 * Order Codes for PE42823 Order Codes Description Packaging Shipping Method PE42823A-X PE42823 SPDT RF switch 16-lead 3 x 3 x 0.75 mm QFN 500 units/T&R EK42823-01 PE42823 Evaluation kit Evaluation kit 1/Box Document Categories Advance Information The product is in a formative or design stage. The datasheet contains design target specifications for product development. Specifications and features may change in any manner without notice. Preliminary Specification The datasheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product. Product Specification The datasheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended changes by issuing a CNF (Customer Notification Form). Sales Contact For additional information, contact Sales at sales@psemi.com. Disclaimers The information in this document is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user's own risk. No patent rights or licenses to any circuits described in this document are implied or granted to any third party. Peregrine's products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications. Patent Statement Peregrine products are protected under one or more of the following U.S. patents: patents.psemi.com Copyright and Trademark (c)2015 - 2017, Peregrine Semiconductor Corporation. All rights reserved. The Peregrine name, logo, UTSi and UltraCMOS are registered trademarks and HaRP, MultiSwitch and DuNE are trademarks of Peregrine Semiconductor Corp. Product Specification www.psemi.com DOC-67417-4 - (05/2017)