Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Electric Double Layer Capacitors (Gold Capacitor)/ SE
– EEC-6 –
P0φD0
P1F
P2P
5.4±0.8
φd
H1
13.4 max.
H0
WW1
W2
W0
oh
–+–+
oh1
10.5 max.
■Features
● Endurance : 70 °C 1000 h
● Automatic insertion available
● RoHS directive compliant
Stacked Coin Type
Series: SE
■Specifi cations
Category Temp. Range –25 °C to +70 °C
Maximum Operating Voltage 5.5 V.DC
Nominal Cap.Range 0.022 F to 0.22 F
Characteristics at Low
Temperature
Capacitance change ±30 % of initial measured value at +20 °C (at –25 °C)
Internal resistance <5 times of initial measured value at +20 °C (at –25 °C)
Endurance
After 1000 hours application of 5.5 V. DC at +70 °C, the capacitor shall meet the following limits.
Capacitance change ±30 % of initial measured value
Internal resistance <4 times of initial specifi ed value
Shelf Life After 1000 hours storage at +70°C without load, the capacitor shall meet the specifi ed
limits for Endurance.
■Di men sions in mm(not to scale)
■Recommended Applications
● Memory back-up for video and audio equipment,
cameras, tele phones, printers, data terminals,
rice cookers and intelligent remote controls.
■Standard Products
Maximum
Op er at ing Volt age Capacitance Capacitance
tolerance
Internal resistance
(Initial specifi ed value)
Part number
Min. Packaging
Q’ty
(V.DC) (F) (F) (액) at 1kHz (pcs)
5.5
0.022 0.0176 to 0.0396 <
150 EECSE0H223 1000
0.047 0.0376 to 0.0846 <
120 EECSE0H473 1000
0.10 0.080 to 0.180 <
75 EECSE0H104 1000
0.22 0.176 to 0.396 <
75 EECSE0H224 1000
+0.8
–0.2
Dimensions Nominal Tolerance
φd 0.55 ±0.05
P0 12.7 ±0.2
F 5.0
W 18.0 ±0.5
W05.5<–
W19.0 ±0.5
W20 to 3.0 –
H016.4 ±0.5
φD04.0 ±0.2
P 12.7 ±1.0
P13.85 ±0.50
P26.35 ±1.00
욼h, 욼h10 ±1.0
H130.3>–
Note: 1. When ordering please observe the minimum packaging quantity.
2. When the surface mount component goes through UV or a heat oven to affi x the adhesive glue, the capacitor’s surface
temperature should not exceed 100 °C for more than 60 seconds (maximum tem per a ture should not exceed 105 °C)
3. Do not use refl ow soldering. (IR, Atmosphere heating methods, etc.)
Please refer to the page of “Application Guidelines”.
(Unit : mm)
01 Feb. 2013
