ORDERING INFORMATION
VERSITILE
HIGH PERFORMANCE
MINIATURE SWITCHES
AH7 (NV)
SWITCHES
FEATURES
• Extra long-life spring mechanism
—More than 107 mechanical operations,
105 electrical
• High contact rating of 15 Amps with
an operating force of only 200 g
• Safety insulation guard types
available
• Available in a wide operating force
and capacity range
• UL/CSA/VDE/SEMKO approved
TYPICAL
APPLICATIONS
• Home appliances
• Vending machines
• Amusement and communication
equipment
• Copiers
• General industrial machines
Type of
switch
NV switch
Contact
arrangement Terminal Actuators
1: Bottom COM
terminal SPDT
2: Bottom COM
terminal SPST-NC
3: Bottom COM
terminal SPST-NO
4: Side COM
terminal SPDT
5: Side COM
terminal SPST-NC
6: Side COM
terminal SPST-NO
2: Solder terminal
without guard
5: .187 Quick-connect/
solder terminal
without guard
8: .250 Quick-connect
terminal
0: Pin plunger
1: Short hinge
lever
2: Hinge lever
3: Long hinge
lever
4: Simulated
roller lever
5: Short roller
lever
6: Roller lever
Operating force
by pin plunger
(max.)
Agency standard Contact
Ex. AH7
∗1
Heat Resistant type Ag alloy contact
Type 0.49N 0.98N
356 456
1.96N 2.94N 3.92N
356 456
––
555 655 755
362 462 562 – –
.187 Quick connect/solder terminal
Au clad contact .187 Quick connect/solder terminal
Solder terminal
.250 Quick connect terminal
Standard type Ag alloy contact
360 460
360 460
––
567
361 461 561 – –
.187 Quick connect/solder terminal
Au clad contact .187 Quick connect/solder terminal
Solder terminal
.250 Quick connect terminal
∗1 9: UL/CSA 6 × 103 rated
8: VDE/SEMKO
(VDE is not available for
Side COM terminal SPDT
and Side COM terminal
SPST-NO type.)
F: Cadmium free
(F is required only for
silver alloy contact
type. F is not required
for gold clad contact
type as it is originally
cadmium free.)
AH7
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AH7
TERMINALS mm
TABLE OF PRODUCT TYPES
Types Contact
rating
Contact arrangement Schematic Terminals Operating force, max.
SPDT SPST-
NC
SPST-
NO
Bottom
COM
terminal
(without
guard)
Side
terminal
(without
guard)
.187
Quick-
connect/
solder
terminal
Solder
terminal
.250
Quick-
connect
terminal
0.49N 0.98N 1.96N 2.94N 3.92N
Heat resistant
type
15A 250V
AC ——
10A 250V
AC ————
5A 250V
AC ————
Heat resistant
type
(Low-level
circuit type)
3A 250V
AC ——
1. .187 Quick-connect/solder terminal
1) Bottom COM terminal
2) Side COM terminal
3) Terminal portion dimensions
* Indicating for the center of 1.6 dia.
2. Solder terminal
1) Bottom COM terminal
2)Terminal portion dimensions
3. .250 Quick-connect terminal
1) Bottom COM terminal
2) Terminal portion dimensions
3.4
(10)
t=0.5
3-.187 Quick-connect terminal
(10)
3.2*
2.4 dia. 1.6 dia.
6.4
6.35
4.75±0.1
3.4
(6.5)
t=0.5
2.4 dia.
7
6.5
4
3.7
6°
2.35 (11)
t=0.8
3-.250 Quick-connect terminal
1.65 dia.
6.35±0.1
8.05
3.4
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
PRODUCT TYPES
1. Heat resistant type (Ag alloy contact type)
.187 Quick-connect/solder terminal without guard
[SPDT type]
Remark:
When ordering solder terminal, change the fifth digit of part number from “5” to “2”.
(ex.) AH7150555→AH7120555
*: When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
[SPST-NC type]
Remark:
When ordering solder terminal, change the fifth digit of part number from “5” to “2”.
(ex.) AH7150555→AH7120555
*: When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
0.49N AH7150356*F AH7450356*F
0.98N AH7150456*F AH7450456*F
1.96N AH7150555*F AH7450555*F
2.94N AH7150655*F AH7450655*F
3.92N AH7150755*F AH7450755*F
Short hinge lever
0.59N AH7151356*F AH7451356*F
1.08N AH7151456*F AH7451456*F
2.16N AH7151555*F AH7451555*F
3.14N AH7151655*F AH7451655*F
4.12N AH7151755*F AH7451755*F
Hinge lever
0.29N AH7152356*F AH7452356*F
0.59N AH7152456*F AH7452456*F
1.18N AH7152555*F AH7452555*F
1.77N AH7152655*F AH7452655*F
2.35N AH7152755*F AH7452755*F
Long hinge lever
0.15N AH7153356*F AH7453356*F
0.29N AH7153456*F AH7453456*F
0.59N AH7153555*F AH7453555*F
0.88N AH7153655*F AH7453655*F
1.18N AH7153755*F AH7453755*F
Simulated roller lever
0.29N AH7154356*F AH7454356*F
0.59N AH7154456*F AH7454456*F
1.18N AH7154555*F AH7454555*F
1.77N AH7154655*F AH7454655*F
2.35N AH7154755*F AH7454755*F
Short roller lever
0.59N AH7155356*F AH7455356*F
1.08N AH7155456*F AH7455456*F
2.16N AH7155555*F AH7455555*F
3.14N AH7155655*F AH7455655*F
4.12N AH7155755*F AH7455755*F
Roller lever
0.29N AH7156356*F AH7456356*F
0.59N AH7156456*F AH7456456*F
1.18N AH7156555*F AH7456555*F
1.77N AH7156655*F AH7456655*F
2.35N AH7156755*F AH7456755*F
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
0.49N AH7250356*F AH7550356*F
0.98N AH7250456*F AH7550456*F
1.96N AH7250555*F AH7550555*F
2.94N AH7250655*F AH7550655*F
3.92N AH7250755*F AH7550755*F
Short hinge lever
0.59N AH7251356*F AH7551356*F
1.08N AH7251456*F AH7551456*F
2.16N AH7251555*F AH7551555*F
3.14N AH7251655*F AH7551655*F
4.12N AH7251755*F AH7551755*F
Hinge lever
0.29N AH7252356*F AH7552356*F
0.59N AH7252456*F AH7552456*F
1.18N AH7252555*F AH7552555*F
1.77N AH7252655*F AH7552655*F
2.35N AH7252755*F AH7552755*F
Long hinge lever
0.15N AH7253356*F AH7553356*F
0.29N AH7253456*F AH7553456*F
0.59N AH7253555*F AH7553555*F
0.88N AH7253655*F AH7553655*F
1.18N AH7253755*F AH7553755*F
Simulated roller lever
0.29N AH7254356*F AH7554356*F
0.59N AH7254456*F AH7554456*F
1.18N AH7254555*F AH7554555*F
1.77N AH7254655*F AH7554655*F
2.35N AH7254755*F AH7554755*F
Short roller lever
0.59N AH7255356*F AH7555356*F
1.08N AH7255456*F AH7555456*F
2.16N AH7255555*F AH7555555*F
3.14N AH7255655*F AH7555655*F
4.12N AH7255755*F AH7555755*F
Roller lever
0.29N AH7256356*F AH7556356*F
0.59N AH7256456*F AH7556456*F
1.18N AH7256555*F AH7556555*F
1.77N AH7256655*F AH7556655*F
2.35N AH7256755*F AH7556755*F
AH7
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AH7
[SPST-NO type]
Remark:
When ordering solder terminal, change the fifth digit of part number from “5” to “2”.
(ex.) AH7150555→AH7120555
*: When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
0.49N AH7350356*F AH7650356*F
0.98N AH7350456*F AH7650456*F
1.96N AH7350555*F AH7650555*F
2.94N AH7350655*F AH7650655*F
3.92N AH7350755*F AH7650755*F
Short hinge lever
0.59N AH7351356*F AH7651356*F
1.08N AH7351456*F AH7651456*F
2.16N AH7351555*F AH7651555*F
3.14N AH7351655*F AH7651655*F
4.12N AH7351755*F AH7651755*F
Hinge lever
0.29N AH7352356*F AH7652356*F
0.59N AH7352456*F AH7652456*F
1.18N AH7352555*F AH7652555*F
1.77N AH7352655*F AH7652655*F
2.35N AH7352755*F AH7652755*F
Long hinge lever
0.15N AH7353356*F AH7653356*F
0.29N AH7353456*F AH763456*F
0.59N AH7353555*F AH7653555*F
0.88N AH7353655*F AH7653655*F
1.18N AH7353755*F AH7653755*F
Simulated roller lever
0.29N AH7354356*F AH7654356*F
0.59N AH7354456*F AH7654456*F
1.18N AH7354555*F AH7654555*F
1.77N AH7354655*F AH7654655*F
2.35N AH7354755*F AH7654755*F
Short roller lever
0.59N AH7355356*F AH7655356*F
1.08N AH7355456*F AH7655456*F
2.16N AH7355555*F AH7655555*F
3.14N AH7355655*F AH7655655*F
4.12N AH7355755*F AH7655755*F
Roller lever
0.29N AH7356356*F AH7656356*F
0.59N AH7356456*F AH7656456*F
1.18N AH7356555*F AH7656555*F
1.77N AH7356655*F AH7656655*F
2.35N AH7356755*F AH7656755*F
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
Solder terminal without guard
[SPDT type]
Remark:
When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
[SPST-NC type]
Remark:
When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
0.49N AH7120356*F AH7420356*F
0.98N AH7120456*F AH7420456*F
1.96N AH7120555*F AH7420555*F
2.94N AH7120655*F AH7420655*F
3.92N AH7120755*F AH7420755*F
Short hinge lever
0.59N AH7121356*F AH7421356*F
1.08N AH7121456*F AH7421456*F
2.16N AH7121555*F AH7421555*F
3.14N AH7121655*F AH7421655*F
4.12N AH7121755*F AH7421755*F
Hinge lever
0.29N AH7122356*F AH7422356*F
0.59N AH7122456*F AH7422456*F
1.18N AH7122555*F AH7422555*F
1.77N AH7122655*F AH7422655*F
2.35N AH7122755*F AH7422755*F
Long hinge lever
0.15N AH7123356*F AH7423356*F
0.29N AH7123456*F AH7423456*F
0.59N AH7123555*F AH7423555*F
0.88N AH7123655*F AH7423655*F
1.18N AH7123755*F AH7423755*F
Simulated roller lever
0.29N AH7124356*F AH7424356*F
0.59N AH7124456*F AH7424456*F
1.18N AH7124555*F AH7424555*F
1.77N AH7124655*F AH7424655*F
2.35N AH7124755*F AH7424755*F
Short roller lever
0.59N AH7125356*F AH7425356*F
1.08N AH7125456*F AH7425456*F
2.16N AH7125555*F AH7425555*F
3.14N AH7125655*F AH7425655*F
4.12N AH7125755*F AH7425755*F
Roller lever
0.29N AH7126356*F AH7426356*F
0.59N AH7126456*F AH7426456*F
1.18N AH7126555*F AH7426555*F
1.77N AH7126655*F AH7426655*F
2.35N AH7126755*F AH7426755*F
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
0.49N AH7220356*F AH7520356*F
0.98N AH7220456*F AH7520456*F
1.96N AH7220555*F AH7520555*F
2.94N AH7220655*F AH7520655*F
3.92N AH7220755*F AH7520755*F
Short hinge lever
0.59N AH7221356*F AH7521356*F
1.08N AH7221456*F AH7521456*F
2.16N AH7221555*F AH7521555*F
3.14N AH7221655*F AH7521655*F
4.12N AH7221755*F AH7521755*F
Hinge lever
0.29N AH7222356*F AH7522356*F
0.59N AH7222456*F AH7522456*F
1.18N AH7222555*F AH7522555*F
1.77N AH7222655*F AH7522655*F
2.35N AH7222755*F AH7522755*F
Long hinge lever
0.15N AH7223356*F AH7523356*F
0.29N AH7223456*F AH7523456*F
0.59N AH7223555*F AH7523555*F
0.88N AH7223655*F AH7523655*F
1.18N AH7223755*F AH7523755*F
Simulated roller lever
0.29N AH7224356*F AH7524356*F
0.59N AH7224456*F AH7524456*F
1.18N AH7224555*F AH7524555*F
1.77N AH7224655*F AH7524655*F
2.35N AH7224755*F AH7524755*F
Short roller lever
0.59N AH7225356*F AH7525356*F
1.08N AH7225456*F AH7525456*F
2.16N AH7225555*F AH7525555*F
3.14N AH7225655*F AH7525655*F
4.12N AH7225755*F AH7525755*F
Roller lever
0.29N AH7226356*F AH7526356*F
0.59N AH7226456*F AH7526456*F
1.18N AH7226555*F AH7526555*F
1.77N AH7226655*F AH7526655*F
2.35N AH7226755*F AH7526755*F
AH7
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AH7
[SPST-NO type]
Remark:
When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
0.49N AH7320356*F AH7620356*F
0.98N AH7320456*F AH7620456*F
1.96N AH7320555*F AH7620555*F
2.94N AH7320655*F AH7620655*F
3.92N AH7320755*F AH7620755*F
Short hinge lever
0.59N AH7321356*F AH7621356*F
1.08N AH7321456*F AH7621456*F
2.16N AH7321555*F AH7621555*F
3.14N AH7321655*F AH7621655*F
4.12N AH7321755*F AH7621755*F
Hinge lever
0.29N AH7322356*F AH7622356*F
0.59N AH7322456*F AH7622456*F
1.18N AH7322555*F AH7622555*F
1.77N AH7322655*F AH7622655*F
2.35N AH7322755*F AH7622755*F
Long hinge lever
0.15N AH7323356*F AH7623356*F
0.29N AH7323456*F AH763456*F
0.59N AH7323555*F AH7623555*F
0.88N AH7323655*F AH7623655*F
1.18N AH7323755*F AH7623755*F
Simulated roller lever
0.29N AH7324356*F AH7624356*F
0.59N AH7324456*F AH7624456*F
1.18N AH7324555*F AH7624555*F
1.77N AH7324655*F AH7624655*F
2.35N AH7324755*F AH7624755*F
Short roller lever
0.59N AH7325356*F AH7625356*F
1.08N AH7325456*F AH7625456*F
2.16N AH7325555*F AH7625555*F
3.14N AH7325655*F AH7625655*F
4.12N AH7325755*F AH7625755*F
Roller lever
0.29N AH7326356*F AH7626356*F
0.59N AH7326456*F AH7626456*F
1.18N AH7326555*F AH7626555*F
1.77N AH7326655*F AH7626655*F
2.35N AH7326755*F AH7626755*F
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
.250 Quick-connect terminal
[SPDT type]
Remark:
When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
[SPST-NC type]
Remark:
When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
1.96N AH7180555*F AH7480555*F
2.94N AH7180655*F AH7480655*F
3.92N AH7180755*F AH7480755*F
Short hinge lever
2.16N AH7181555*F AH7481555*F
3.14N AH7181655*F AH7481655*F
4.12N AH7181755*F AH7481755*F
Hinge lever
1.18N AH7182555*F AH7482555*F
1.77N AH7182655*F AH7482655*F
2.35N AH7182755*F AH7482755*F
Long hinge lever
0.59N AH7183555*F AH7483555*F
0.88N AH7183655*F AH7483655*F
1.18N AH7183755*F AH7483755*F
Simulated roller lever
1.18N AH7184555*F AH7484555*F
1.77N AH7184655*F AH7484655*F
2.35N AH7184755*F AH7484755*F
Short roller lever
2.16N AH7185555*F AH7485555*F
3.14N AH7185655*F AH7485655*F
4.12N AH7185755*F AH7485755*F
Roller lever
1.18N AH7186555*F AH7486555*F
1.77N AH7186655*F AH7486655*F
2.35N AH7186755*F AH7486755*F
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
1.96N AH7280555*F AH7580555*F
2.94N AH7280655*F AH7580655*F
3.92N AH7280755*F AH7580755*F
Short hinge lever
2.16N AH7281555*F AH7581555*F
3.14N AH7281655*F AH7581655*F
4.12N AH7281755*F AH7581755*F
Hinge lever
1.18N AH7282555*F AH7582555*F
1.77N AH7282655*F AH7582655*F
2.35N AH7282755*F AH7582755*F
Long hinge lever
0.59N AH7283555*F AH7583555*F
0.88N AH7283655*F AH7583655*F
1.18N AH7283755*F AH7583755*F
Simulated roller lever
1.18N AH7284555*F AH7584555*F
1.77N AH7284655*F AH7584655*F
2.35N AH7284755*F AH7584755*F
Short roller lever
2.16N AH7285555*F AH7585555*F
3.14N AH7285655*F AH7585655*F
4.12N AH7285755*F AH7585755*F
Roller lever
1.18N AH7286555*F AH7586555*F
1.77N AH7286655*F AH7586655*F
2.35N AH7286755*F AH7586755*F
[SPST-NO type]
Remark:
When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
1.96N AH7380555*F AH7680555*F
2.94N AH7380655*F AH7680655*F
3.92N AH7380755*F AH7680755*F
Short hinge lever
2.16N AH7381555*F AH7681555*F
3.14N AH7381655*F AH7681655*F
4.12N AH7381755*F AH7681755*F
Hinge lever
1.18N AH7382555*F AH7682555*F
1.77N AH7382655*F AH7682655*F
2.35N AH7382755*F AH7682755*F
Long hinge lever
0.59N AH7383555*F AH7683555*F
0.88N AH7383655*F AH7683655*F
1.18N AH7383755*F AH7683755*F
Simulated roller lever
1.18N AH7384555*F AH7684555*F
1.77N AH7384655*F AH7684655*F
2.35N AH7384755*F AH7684755*F
Short roller lever
2.16N AH7385555*F AH7685555*F
3.14N AH7385655*F AH7685655*F
4.12N AH7385755*F AH7685755*F
Roller lever
1.18N AH7386555*F AH7686555*F
1.77N AH7386655*F AH7686655*F
2.35N AH7386755*F AH7686755*F
AH7
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AH7
2. Heat resistant type (Au clad contact type)
.187 Quick-connect/solder terminal without guard
[SPDT type]
Remark:
*: When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
[SPST-NC type]
Remark:
*: When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
0.49N AH7150362* AH7450362*
0.98N AH7150462* AH7450462*
1.96N AH7150562* AH7450562*
Short hinge lever
0.59N AH7151362* AH7451362*
1.08N AH7151462* AH7451462*
2.16N AH7151562* AH7451562*
Hinge lever
0.29N AH7152362* AH7452362*
0.59N AH7152462* AH7452462*
1.18N AH7152562* AH7452562*
Long hinge lever
0.15N AH7153362* AH7453362*
0.29N AH7153462* AH7453462*
0.59N AH7153562* AH7453562*
Simulated roller lever
0.29N AH7154362* AH7454362*
0.59N AH7154462* AH7454462*
1.18N AH7154562* AH7454562*
Short roller lever
0.59N AH7155362* AH7455362*
1.08N AH7155462* AH7455462*
2.16N AH7155562* AH7455562*
Roller lever
0.29N AH7156362* AH7456362*
0.59N AH7156462* AH7456462*
1.18N AH7156562* AH7456562*
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
0.49N AH7250362* AH7550362*
0.98N AH7250462* AH7550462*
1.96N AH7250562* AH7550562*
Short hinge lever
0.59N AH7251362* AH7551362*
1.08N AH7251462* AH7551462*
2.16N AH7251562* AH7551562*
Hinge lever
0.29N AH7252362* AH7552362*
0.59N AH7252462* AH7552462*
1.18N AH7252562* AH7552562*
Long hinge lever
0.15N AH7253362* AH7553362*
0.29N AH7253462* AH7553462*
0.59N AH7253562* AH7553562*
Simulated roller lever
0.29N AH7254362* AH7554362*
0.59N AH7254462* AH7554462*
1.18N AH7254562* AH7554562*
Short roller lever
0.59N AH7255362* AH7555362*
1.08N AH7255462* AH7555462*
2.16N AH7255562* AH7555562*
Roller lever
0.29N AH7256362* AH7556362*
0.59N AH7256462* AH7556462*
1.18N AH7256562* AH7556562*
[SPST-NO type]
Remark:
*: When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
0.49N AH7350362* AH7650362*
0.98N AH7350462* AH7650462*
1.96N AH7350562* AH7650562*
Short hinge lever
0.59N AH7351362* AH7651362*
1.08N AH7351462* AH7651462*
2.16N AH7351562* AH7651562*
Hinge lever
0.29N AH7352362* AH7652362*
0.59N AH7352462* AH7652462*
1.18N AH7352562* AH7652562*
Long hinge lever
0.15N AH7353362* AH7653362*
0.29N AH7353462* AH763462*
0.59N AH7353562* AH7653562*
Simulated roller lever
0.29N AH7354362* AH7654362*
0.59N AH7354462* AH7654462*
1.18N AH7354562* AH7654562*
Short roller lever
0.59N AH7355362* AH7655362*
1.08N AH7355462* AH7655462*
2.16N AH7355562* AH7655562*
Roller lever
0.29N AH7356362* AH7656362*
0.59N AH7356462* AH7656462*
1.18N AH7356562* AH7656562*
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
3. Standard type (Ag alloy contact type)
.187 Quick-connect/solder terminal without guard
[SPDT type]
Remark:
When ordering solder terminal, change the fifth digit of part number from “5” to “2”.
(ex.) AH7150555→AH7120555
*: When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
[SPST-NC type]
Remark:
When ordering solder terminal, change the fifth digit of part number from “5” to “2”.
(ex.) AH7150555→AH7120555
*: When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
0.49N AH7150360*F AH7450360*F
0.98N AH7150460*F AH7450460*F
1.96N AH71505*F AH74505*F
2.94N AH71506*F AH74506*F
3.92N AH71507*F AH74507*F
Short hinge lever
0.59N AH7151360*F AH7451360*F
1.08N AH7151460*F AH7451460*F
2.16N AH71515*F AH74515*F
3.14N AH71516*F AH74516*F
4.12N AH71517*F AH74517*F
Hinge lever
0.29N AH7152360*F AH7452360*F
0.59N AH7152460*F AH7452460*F
1.18N AH71525*F AH74525*F
1.77N AH71526*F AH74526*F
2.35N AH71527*F AH74527*F
Long hinge lever
0.15N AH7153360*F AH7453360*F
0.29N AH7153460*F AH7453460*F
0.59N AH71535*F AH74535*F
0.88N AH71536*F AH74536*F
1.18N AH71537*F AH74537*F
Simulated roller lever
0.29N AH7154360*F AH7454360*F
0.59N AH7154460*F AH7454460*F
1.18N AH71545*F AH74545*F
1.77N AH71546*F AH74546*F
2.35N AH71547*F AH74547*F
Short roller lever
0.59N AH7155360*F AH7455360*F
1.08N AH7155460*F AH7455460*F
2.16N AH71555*F AH74555*F
3.14N AH71556*F AH74556*F
4.12N AH71557*F AH74557*F
Roller lever
0.29N AH7156360*F AH7456360*F
0.59N AH7156460*F AH7456460*F
1.18N AH71565*F AH74565*F
1.77N AH71566*F AH74566*F
2.35N AH71567*F AH74567*F
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
0.49N AH7250360*F AH7550360*F
0.98N AH7250460*F AH7550460*F
1.96N AH72505*F AH75505*F
2.94N AH72506*F AH75506*F
3.92N AH72507*F AH75507*F
Short hinge lever
0.59N AH7251360*F AH7551360*F
1.08N AH7251460*F AH7551460*F
2.16N AH72515*F AH75515*F
3.14N AH72516*F AH75516*F
4.12N AH72517*F AH75517*F
Hinge lever
0.29N AH7252360*F AH7552360*F
0.59N AH7252460*F AH7552460*F
1.18N AH72525*F AH75525*F
1.77N AH72526*F AH75526*F
2.35N AH72527*F AH75527*F
Long hinge lever
0.15N AH7253360*F AH7553360*F
0.29N AH7253460*F AH7553460*F
0.59N AH72535*F AH75535*F
0.88N AH72536*F AH75536*F
1.18N AH72537*F AH75537*F
Simulated roller lever
0.29N AH7254360*F AH7554360*F
0.59N AH7254460*F AH7554460*F
1.18N AH72545*F AH75545*F
1.77N AH72546*F AH75546*F
2.35N AH72547*F AH75547*F
Short roller lever
0.59N AH7255360*F AH7555360*F
1.08N AH7255460*F AH7555460*F
2.16N AH72555*F AH75555*F
3.14N AH72556*F AH75556*F
4.12N AH72557*F AH75557*F
Roller lever
0.29N AH7256360*F AH7556360*F
0.59N AH7256460*F AH7556460*F
1.18N AH72565*F AH75565*F
1.77N AH72566*F AH75566*F
2.35N AH72567*F AH75567*F
AH7
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AH7
[SPST-NO type]
Remark:
When ordering solder terminal, change the fifth digit of part number from “5” to “2”.
(ex.) AH7150555→AH7120555
*: When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
0.49N AH7350360*F AH7650360*F
0.98N AH7350460*F AH7650460*F
1.96N AH73505*F AH76505*F
2.94N AH73506*F AH76506*F
3.92N AH73507*F AH76507*F
Short hinge lever
0.59N AH7351360*F AH7651360*F
1.08N AH7351460*F AH7651460*F
2.16N AH73515*F AH76515*F
3.14N AH73516*F AH76516*F
4.12N AH73517*F AH76517*F
Hinge lever
0.29N AH7352360*F AH7652360*F
0.59N AH7352460*F AH7652460*F
1.18N AH73525*F AH76525*F
1.77N AH73526*F AH76526*F
2.35N AH73527*F AH76527*F
Long hinge lever
0.15N AH7353360*F AH7653360*F
0.29N AH7353460*F AH763460*F
0.59N AH73535*F AH76535*F
0.88N AH73536*F AH76536*F
1.18N AH73537*F AH76537*F
Simulated roller lever
0.29N AH7354360*F AH7654360*F
0.59N AH7354460*F AH7654460*F
1.18N AH73545*F AH76545*F
1.77N AH73546*F AH76546*F
2.35N AH73547*F AH76547*F
Short roller lever
0.59N AH7355360*F AH7655360*F
1.08N AH7355460*F AH7655460*F
2.16N AH73555*F AH76555*F
3.14N AH73556*F AH76556*F
4.12N AH73557*F AH76557*F
Roller lever
0.29N AH7356360*F AH7656360*F
0.59N AH7356460*F AH7656460*F
1.18N AH73565*F AH76565*F
1.77N AH73566*F AH76566*F
2.35N AH73567*F AH76567*F
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
Solder terminal without guard
[SPDT type]
Remark:
When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
[SPST-NC type]
Remark:
When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
0.49N AH7120360*F AH7420360*F
0.98N AH7120460*F AH7420460*F
1.96N AH71205*F AH74205*F
2.94N AH71206*F AH74206*F
3.92N AH71207*F AH74207*F
Short hinge lever
0.59N AH7121360*F AH7421360*F
1.08N AH7121460*F AH7421460*F
2.16N AH71215*F AH74215*F
3.14N AH71216*F AH74216*F
4.12N AH71217*F AH74217*F
Hinge lever
0.29N AH7122360*F AH7422360*F
0.59N AH7122460*F AH7422460*F
1.18N AH71225*F AH74225*F
1.77N AH71226*F AH74226*F
2.35N AH71227*F AH74227*F
Long hinge lever
0.15N AH7123360*F AH7423360*F
0.29N AH7123460*F AH7423460*F
0.59N AH71235*F AH74235*F
0.88N AH71236*F AH74236*F
1.18N AH71237*F AH74237*F
Simulated roller lever
0.29N AH7124360*F AH7424360*F
0.59N AH7124460*F AH7424460*F
1.18N AH71245*F AH74245*F
1.77N AH71246*F AH74246*F
2.35N AH71247*F AH74247*F
Short roller lever
0.59N AH7125360*F AH7425360*F
1.08N AH7125460*F AH7425460*F
2.16N AH71255*F AH74255*F
3.14N AH71256*F AH74256*F
4.12N AH71257*F AH74257*F
Roller lever
0.29N AH7126360*F AH7426360*F
0.59N AH7126460*F AH7426460*F
1.18N AH71265*F AH74265*F
1.77N AH71266*F AH74266*F
2.35N AH71267*F AH74267*F
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
0.49N AH7220360*F AH7520360*F
0.98N AH7220460*F AH7520460*F
1.96N AH72205*F AH75205*F
2.94N AH72206*F AH75206*F
3.92N AH72207*F AH75207*F
Short hinge lever
0.59N AH7221360*F AH7521360*F
1.08N AH7221460*F AH7521460*F
2.16N AH72215*F AH75215*F
3.14N AH72216*F AH75216*F
4.12N AH72217*F AH75217*F
Hinge lever
0.29N AH7222360*F AH7522360*F
0.59N AH7222460*F AH7522460*F
1.18N AH72225*F AH75225*F
1.77N AH72226*F AH75226*F
2.35N AH72227*F AH75227*F
Long hinge lever
0.15N AH7223360*F AH7523360*F
0.29N AH7223460*F AH7523460*F
0.59N AH72235*F AH75235*F
0.88N AH72236*F AH75236*F
1.18N AH72237*F AH75237*F
Simulated roller lever
0.29N AH7224360*F AH7524360*F
0.59N AH7224460*F AH7524460*F
1.18N AH72245*F AH75245*F
1.77N AH72246*F AH75246*F
2.35N AH72247*F AH75247*F
Short roller lever
0.59N AH7225360*F AH7525360*F
1.08N AH7225460*F AH7525460*F
2.16N AH72255*F AH75255*F
3.14N AH72256*F AH75256*F
4.12N AH72257*F AH75257*F
Roller lever
0.29N AH7226360*F AH7526360*F
0.59N AH7226460*F AH7526460*F
1.18N AH72265*F AH75265*F
1.77N AH72266*F AH75266*F
2.35N AH72267*F AH75267*F
AH7
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AH7
[SPST-NO type]
Remark:
When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
0.49N AH7320360*F AH7620360*F
0.98N AH7320460*F AH7620460*F
1.96N AH73205*F AH76205*F
2.94N AH73206*F AH76206*F
3.92N AH73207*F AH76207*F
Short hinge lever
0.59N AH7321360*F AH7621360*F
1.08N AH7321460*F AH7621460*F
2.16N AH73215*F AH76215*F
3.14N AH73216*F AH76216*F
4.12N AH73217*F AH76217*F
Hinge lever
0.29N AH7322360*F AH7622360*F
0.59N AH7322460*F AH7622460*F
1.18N AH73225*F AH76225*F
1.77N AH73226*F AH76226*F
2.35N AH73227*F AH76227*F
Long hinge lever
0.15N AH7323360*F AH7623360*F
0.29N AH7323460*F AH763460*F
0.59N AH73235*F AH76235*F
0.88N AH73236*F AH76236*F
1.18N AH73237*F AH76237*F
Simulated roller lever
0.29N AH7324360*F AH7624360*F
0.59N AH7324460*F AH7624460*F
1.18N AH73245*F AH76245*F
1.77N AH73246*F AH76246*F
2.35N AH73247*F AH76247*F
Short roller lever
0.59N AH7325360*F AH7625360*F
1.08N AH7325460*F AH7625460*F
2.16N AH73255*F AH76255*F
3.14N AH73256*F AH76256*F
4.12N AH73257*F AH76257*F
Roller lever
0.29N AH7326360*F AH7626360*F
0.59N AH7326460*F AH7626460*F
1.18N AH73265*F AH76265*F
1.77N AH73266*F AH76266*F
2.35N AH73267*F AH76267*F
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
.250 Quick-connect terminal
[SPDT type]
Remark:
When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
[SPST-NC type]
Remark:
When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
1.96N AH71805*F AH74805*F
2.94N AH71806*F AH74806*F
3.92N AH71807*F AH74807*F
Short hinge lever
2.16N AH71815*F AH74815*F
3.14N AH71816*F AH74816*F
4.12N AH71817*F AH74817*F
Hinge lever
1.18N AH71825*F AH74825*F
1.77N AH71826*F AH74826*F
2.35N AH71827*F AH74827*F
Long hinge lever
0.59N AH71835*F AH74835*F
0.88N AH71836*F AH74836*F
1.18N AH71837*F AH74837*F
Simulated roller lever
1.18N AH71845*F AH74845*F
1.77N AH71846*F AH74846*F
2.35N AH71847*F AH74847*F
Short roller lever
2.16N AH71855*F AH74855*F
3.14N AH71856*F AH74856*F
4.12N AH71857*F AH74857*F
Roller lever
1.18N AH71865*F AH74865*F
1.77N AH71866*F AH74866*F
2.35N AH71867*F AH74867*F
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
1.96N AH72805*F AH75805*F
2.94N AH72806*F AH75806*F
3.92N AH72807*F AH75807*F
Short hinge lever
2.16N AH72815*F AH75815*F
3.14N AH72816*F AH75816*F
4.12N AH72817*F AH75817*F
Hinge lever
1.18N AH72825*F AH75825*F
1.77N AH72826*F AH75826*F
2.35N AH72827*F AH75827*F
Long hinge lever
0.59N AH72835*F AH75835*F
0.88N AH72836*F AH75836*F
1.18N AH72837*F AH75837*F
Simulated roller lever
1.18N AH72845*F AH75845*F
1.77N AH72846*F AH75846*F
2.35N AH72847*F AH75847*F
Short roller lever
2.16N AH72855*F AH75855*F
3.14N AH72856*F AH75856*F
4.12N AH72857*F AH75857*F
Roller lever
1.18N AH72865*F AH75865*F
1.77N AH72866*F AH75866*F
2.35N AH72867*F AH75867*F
[SPST-NO type]
Remark:
When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
1.96N AH73805*F AH76805*F
2.94N AH73806*F AH76806*F
3.92N AH73807*F AH76807*F
Short hinge lever
2.16N AH73815*F AH76815*F
3.14N AH73816*F AH76816*F
4.12N AH73817*F AH76817*F
Hinge lever
1.18N AH73825*F AH76825*F
1.77N AH73826*F AH76826*F
2.35N AH73827*F AH76827*F
Long hinge lever
0.59N AH73835*F AH76835*F
0.88N AH73836*F AH76836*F
1.18N AH73837*F AH76837*F
Simulated roller lever
1.18N AH73845*F AH76845*F
1.77N AH73846*F AH76846*F
2.35N AH73847*F AH76847*F
Short roller lever
2.16N AH73855*F AH76855*F
3.14N AH73856*F AH76856*F
4.12N AH73857*F AH76857*F
Roller lever
1.18N AH73865*F AH76865*F
1.77N AH73866*F AH76866*F
2.35N AH73867*F AH76867*F
AH7
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AH7
4. Standard type (Au clad contact type)
.187 Quick-connect/solder terminal without guard
[SPDT type]
Remark:
*: When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
[SPST-NC type]
Remark:
*: When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
0.49N AH7150361* AH7450361*
0.98N AH7150461* AH7450461*
1.96N AH7150561* AH7450561*
Short hinge lever
0.59N AH7151361* AH7451361*
1.08N AH7151461* AH7451461*
2.16N AH7151561* AH7451561*
Hinge lever
0.29N AH7152361* AH7452361*
0.59N AH7152461* AH7452461*
1.18N AH7152561* AH7452561*
Long hinge lever
0.15N AH7153361* AH7453361*
0.29N AH7153461* AH7453461*
0.59N AH7153561* AH7453561*
Simulated roller lever
0.29N AH7154361* AH7454361*
0.59N AH7154461* AH7454461*
1.18N AH7154561* AH7454561*
Short roller lever
0.59N AH7155361* AH7455361*
1.08N AH7155461* AH7455461*
2.16N AH7155561* AH7455561*
Roller lever
0.29N AH7156361* AH7456361*
0.59N AH7156461* AH7456461*
1.18N AH7156561* AH7456561*
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
0.49N AH7250361* AH7550361*
0.98N AH7250461* AH7550461*
1.96N AH7250561* AH7550561*
Short hinge lever
0.59N AH7251361* AH7551361*
1.08N AH7251461* AH7551461*
2.16N AH7251561* AH7551561*
Hinge lever
0.29N AH7252361* AH7552361*
0.59N AH7252461* AH7552461*
1.18N AH7252561* AH7552561*
Long hinge lever
0.15N AH7253361* AH7553361*
0.29N AH7253461* AH7553461*
0.59N AH7253561* AH7553561*
Simulated roller lever
0.29N AH7254361* AH7554361*
0.59N AH7254461* AH7554461*
1.18N AH7254561* AH7554561*
Short roller lever
0.59N AH7255361* AH7555361*
1.08N AH7255461* AH7555461*
2.16N AH7255561* AH7555561*
Roller lever
0.29N AH7256361* AH7556361*
0.59N AH7256461* AH7556461*
1.18N AH7256561* AH7556561*
[SPST-NO type]
Remark:
*: When ordering international standard approved types, please insert following
number to the * marked position
9: UL/CSA 6×103 rated
8: VDE/SEMKO (VDE is not available for Side COM terminal SPDT and Side COM
terminal SPST-NO type.)
Actuators Operating
force, max.
Bottom COM
terminal
Side COM
terminal
Pin plunger
0.49N AH7350361* AH7650361*
0.98N AH7350461* AH7650461*
1.96N AH7350561* AH7650561*
Short hinge lever
0.59N AH7351361* AH7651361*
1.08N AH7351461* AH7651461*
2.16N AH7351561* AH7651561*
Hinge lever
0.29N AH7352361* AH7652361*
0.59N AH7352461* AH7652461*
1.18N AH7352561* AH7652561*
Long hinge lever
0.15N AH7353361* AH7653361*
0.29N AH7353461* AH763461*
0.59N AH7353561* AH7653561*
Simulated roller lever
0.29N AH7354361* AH7654361*
0.59N AH7354461* AH7654461*
1.18N AH7354561* AH7654561*
Short roller lever
0.59N AH7355361* AH7655361*
1.08N AH7355461* AH7655461*
2.16N AH7355561* AH7655561*
Roller lever
0.29N AH7356361* AH7656361*
0.59N AH7356461* AH7656461*
1.18N AH7356561* AH7656561*
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
SPECIFICATIONS
1. Contact rating
• Gold clad low level circuit type (resistive load)
Minimum load:
6V DC 5mA
12V DC 2mA
24V DC 1mA
2. Characteristics
3. Operating characteristics
mm
1) Pin plunger
2) Short hinge lever
3) Hinge lever
Contact Operating force by pin plunger (max.) Rating (resistive load)
Movable contact: AgSnO2 alloy
Stational contact: AgZnO alloy
0.49N 5A 250V AC, 0.5A 125V DC
0.98N 10A 250V AC, 0.6A 125V DC
1.96N, 3.92N 15A 250V AC, 0.6A 125V DC
AgNi alloy + Au clad 0.49 to 1.96N 3A 250V AC
Contact Movable contact: AgSnO2 alloy
Stational contact: AgZnO alloy AgNi alloy + Au clad
Operating force by pin plunger (max.) 0.49N 0.98N 1.96N, 2.94N, 3.92N — — 0.49N 0.98N 1.96N
Expected
life (min.)
Mechanical (at O.T. rated) Min. 107 (at 60 cpm)
Electrical (at O.T. min.) Min. 105 (at rated load, 20 cpm)
Insulation resistance (min.) Min. 100MΩ (at 500V DC)
Dielectric
strength
Between terminals 1,000V AC for 1min.
Between terminals and other
exposed metal parts 1,500V AC for 1min.
Between terminals and ground 1,500V AC for 1min.
Contact resistance (Initial) Max. 50mΩ (by voltage drop at 1A 6 to 8V DC) Max. 50 mΩ (by voltage drop at 0.1A 6 to 8V DC)
Vibration resistance (by pin plunger types) 10 to 55 Hz at amplitude of 0.75mm (Contact opening: max. 1msec.)
Shock resistance (by pin plunger types)
Min. 98m/s2196m/s2294m/s298m/s2196m/s2294m/s2
Allowable operating speed 0.1 to 1,000mm/sec.
Max. operating cycle rate 600/min.
Ambient temperature –25°C to +120°C (No freezing below 0°C)
Unit weight 8g
Fifth digit of
part number O.F. max. R.F. min. P.T. max. M.D. max. O.T. min. O.P. max.
1——————
2——————
3 0.49N 0.12N 1.6 0.4 0.8 14.7±0.6
4 0.98N 0.25N 1.6 0.4 0.8 14.7±0.6
5 1.96N 0.49N 1.6 0.4 0.8 14.7±0.6
6 2.94N 0.74N 1.6 0.4 0.8 14.7±0.6
7 3.92N 0.98N 1.6 0.4 0.8 14.7±0.6
Fifth digit of
part number O.F. max. R.F. min. P.T. max. M.D. max. O.T. min. O.P. max.
3 0.59N 0.098N 1.6 0.5 0.8 15.3±0.8
4 1.08N 0.20N 1.6 0.5 0.8 15.3±0.8
5 2.16N 0.39N 1.6 0.5 0.8 15.3±0.8
6 3.14N 0.59N 1.6 0.5 0.8 15.3±0.8
7 4.12N 0.78N 1.6 0.5 0.8 15.3±0.8
Fifth digit of
part number O.F. max. R.F. min. P.T. max. M.D. max. O.T. min. O.P. max.
3 0.29N 0.049N 3.2 1.2 1.2 15.3±1.2
4 0.59N 0.098N 3.2 1.2 1.2 15.3±1.2
5 1.18N 0.20N 3.2 1.2 1.2 15.3±1.2
6 1.77N 0.29N 3.2 1.2 1.2 15.3±1.2
7 2.35N 0.39N 3.2 1.2 1.2 15.3±1.2
AH7
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AH7
4) Long hinge lever
5) Simulated roller lever
6) Short roller lever
7) Roller lever
DIMENSIONS mm
Fifth digit of
part number O.F. max. R.F. min. P.T. max. M.D. max. O.T. min. O.P. max.
3 0.15N 0.025N 7.5 2.2 2.2 15.3±2.6
4 0.29N 0.049N 7.5 2.2 2.2 15.3±2.6
5 0.59N 0.098N 7.5 2.2 2.2 15.3±2.6
6 0.88N 0.15N 7.5 2.2 2.2 15.3±2.6
7 1.18N 0.39N 7.5 2.2 2.2 15.3±2.6
Fifth digit of
part number O.F. max. R.F. min. P.T. max. M.D. max. O.T. min. O.P. max.
3 0.29N 0.049N 3.2 1.2 1.2 18.5±1.2
4 0.59N 0.098N 3.2 1.2 1.2 18.5±1.2
5 1.18N 0.20N 3.2 1.2 1.2 18.5±1.2
6 1.77N 0.29N 3.2 1.2 1.2 18.5±1.2
7 2.35N 0.39N 3.2 1.2 1.2 18.5±1.2
Fifth digit of
part number O.F. max. R.F. min. P.T. max. M.D. max. O.T. min. O.P. max.
3 0.59N 0.098N 1.6 0.5 0.8 20.7±0.8
4 1.08N 0.20N 1.6 0.5 0.8 20.7±0.8
5 2.16N 0.39N 1.6 0.5 0.8 20.7±0.8
6 3.14N 0.59N 1.6 0.5 0.8 20.7±0.8
7 4.12N 0.78N 1.6 0.5 0.8 20.7±0.8
Fifth digit of
part number O.F. max. R.F. min. P.T. max. M.D. max. O.T. min. O.P. max.
3 0.29N 0.049N 3.2 1.2 1.2 20.7±1.2
4 0.59N 0.098N 3.2 1.2 1.2 20.7±1.2
5 1.18N 0.20N 3.2 1.2 1.2 20.7±1.2
6 1.77N 0.29N 3.2 1.2 1.2 20.7±1.2
7 2.35N 0.39N 3.2 1.2 1.2 20.7±1.2
1. Pin plunger
Bottom COM terminal (Guardless)
.187 Quick-connect/Solder terminal
3.95
10.3
19.3
15.9
0.5
27.8
2.8
2.8
2.8
(P.T.)
1.6 max.
(O.P.)
14.7±0.6
20.2±0.3
3.4±0.15
22.2±0.1
37.8±0.5
3.1 dia. hole
+0.25
–0.05
3.1 +0.25
–0.05
10.3+0.1
Solder terminal
3.95
10.3
19.3
15.9
27.8
2.8
2.8
2.8
(P.T.)
1.6 max.
(O.P.)
14.7±0.6
20.2±0.3
3.4±0.15
22.2±0.1
37.3±0.5
3.1 dia. hole
+0.25
–0.05
3.1 +0.25
–0.05
10.3+0.1
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
Side COM terminal (with right-hand guard) mm
Side COM terminal (Guardless)
.187 Quick-connect/Solder terminal
3.95
10.3
15.916.1
27.8
2.8
2.8
2.8
(P.T.)
1.6 max.
(O.P.)
14.7±0.6
20.2±0.3
3.4±0.15
22.2±0.1
37.8±0.5
3.1 dia. hole
+0.25
–0.05
3.1 +0.25
–0.05
10.3+0.1
2. Short hinge lever
5
(P.T.)
1.6 max.
(O.P.)
15.3±0.8
22.1±0.5
3. Hinge lever
5
(P.T.)
3.2 max.
(O.P.)
15.3±1.2
35.8±0.5
4. Long hinge lever
5
(P.T.)
7.5 max.
(O.P.)
15.3±2.6
59.5±0.5
5. Simulated roller lever
5
(P.T.)
3.2 max.
3R
(O.P.)
18.5±1.2
32.8±0.5
AH7
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AH7
6. Short roller lever mm
NOTES
4.9
4.8 dia.
(P.T.)
1.6 max.
(O.P.)
20.7±0.8
20.6±0.5
7. Roller lever
34.2±0.5 4.9
4.8 dia.
(P.T.)
3.2 max.
(O.P.)
20.7±1.2
1. Use M3 screws to mount switches with
less than 0.49N·m torque. Use of screw
washers or adhesive lock is
recommended. Before mounting, check
insulation distance between terminals as
well as between terminals and ground. If
enough distance is not secured, it is
recommended to use insulation material
in mounting.
2. Set 70 to 100% overtravel in actual
use. When the operation object is in the
free position, force should not be applied
directly to the actuator or to the pin
plunger. Also force should be applied to
the pin plunger from vertical direction to
the switch.
3. When specifying NV switches, allow
±20% to the listed operating and release
forces.
4. Hand soldering should be
accomplished in less than 5 seconds,
preferably with a 60 watt iron. Avoid
contacting the switch case with the
soldering iron.
5. Low-level circuit type is recommended
for using under low-level current and
voltage.
6. Avoid using NV switches in the
following conditions:
• In corrosive gases, such as hydrogen
sulfide.
• In flammable or explosive gases such
as gasoline or thinner etc.
• In a dusty environment.
• In an ambient temperature under –25°C
or over 80°C.
• In an ambient humidity over 85% R.H..
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
