Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition: • 12.04.2004
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition:
Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Photoelectric sensor
retro-reflective sensor
VS3RP5XLPQ
●miniature sensor
●retro-reflective sensor with polari-
sation filter
●dark operate
Wiring diagram
With retro-reflective sensors, emitter and
receiver are incorporated in one compact
housing. The light beam of the emitter is di-
rected towards a reflector which returns
the light back to the receiver. An object is
detected when it interrupts this beam. Re-
tro-reflective sensors incorporate some of
the advantages of opposed mode sensors
(good contrast and high excess gain). Fur-
ther it is merely required to install and wire
a single device. Devices with polarisation
filter should be used for detection of shiny
targets.
Excess gain curve
Excess gain in relation to the distance
+
BN
BK
BU
10 100 1000 mm1
1
10
100
LV
LP
BRT32x20AM
Type VS3RP5XLPQ
Ident-No. 3062626
Operating mode Retro-reflective sensor with polarising filter
Type of light red
Wave length 680 nm
Operating temperature -20 ...+ 55 °C
Rated operational voltage (DC) UB10... 30 VDC
Rated operational current (DC) Ie≤ 50 mA
No-load current I0≤ 25 mA
Short-circuit protection yes, cyclic
Reverse polarity protection yes
Output function normally open, PNP
Switching frequency ≤ 500 Hz
Max. switch-on delay ≤ 150 ms
Housing style rectangular; VS3
Housing material plastic, ABS
Lens Glas
Wiring connector, M8 x 1
Degree of protection IP67
Supply voltage indication LED green
Switching status indication LED yellow
Error indication LED green
35,2
M8 x 1
15,6
12,6
14,2
25,4
7,3
16,4
ø 3,2
9
LED YE
LED GN
