THN 30-4810 - TRACO Power - Product.Network

http://www.tracopower.com Page 1 of 4

DC/DC Converters

THN 30 Series, 30 Watt

Order code Input voltage range Output voltage Output current max. Efﬁciency typ.

THN 30-1210 3.3 VDC 7000 mA 86 %

THN 30-1211 5.0 VDC 6000 mA 89 %

THN 30-1212 9 – 18 VDC 12 VDC 2500 mA 89 %

THN 30-1213 (12 VDC nominal) 15 VDC 2000 mA 89 %

THN 30-1215 24 VDC 1250 mA 89 %

THN 30-1222 ±12 VDC ±1250 mA 89 %

THN 30-1223 ±15 VDC ±1000 mA 90 %

THN 30-2410 3.3 VDC 7000 mA 87 %

THN 30-2411 5.0 VDC 6000 mA 90 %

THN 30-2412 18 – 36 VDC 12 VDC 2500 mA 91 %

THN 30-2413 (24 VDC nominal) 15 VDC 2000 mA 91 %

THN 30-2415 24 VDC 1250 mA 91 %

THN 30-2422 ±12 VDC ±1250 mA 91 %

THN 30-2423 ±15 VDC ±1000 mA 91 %

THN 30-4810 3.3 VDC 7000 mA 87 %

THN 30-4811 5.0 VDC 6000 mA 89 %

THN 30-4812 36 – 75 VDC 12 VDC 2500 mA 90 %

THN 30-4813 (48 VDC nominal) 15 VDC 2000 mA 91 %

THN 30-4815 24 VDC 1250 mA 91 %

THN 30-4822 ±12 VDC ±1250 mA 91 %

THN 30-4823 ±15 VDC ±1000 mA 92 %

Models

Scheme

UL 60950-1UL 60950-1

Features

◆ Highest power density 30W converter!

Ultra compact size: 1.0” x 1.0” x 0.4”

◆ Shielded metal case with isolated

baseplate

◆ Wide 2:1 input voltage range

◆ Very high efﬁciency across full load range

up to 92%

◆ Over temperature protection

◆ Operating temp. range –40°C to +80°C

and up to 85 °C with heat-sink

◆ Ultra low no load input current

◆ Remote On/Off control

◆ Output voltage adjustable

◆ I/O isolation voltage 1500 VDC

◆ RoHS 2011/65/EU compliant

◆ 3-year product warranty

The THN-30 series is the latest generation of high performance DC/DC converter

modules with highest power density. The product achieves 30W output power while

it comes in a metal case with dimensions of only 1.0”x 1.0”x 0.4”.

All models have an wide 2:1 input voltage range and precisely regulated output

voltages, even under no load conditions. Highest efﬁciency across load range makes

this product very reliable and applicable in temperature ranges of up to 85°C. With

a low input current at no load and remote On/Off control these converters are

the ideal solution for battery-operated systems. Typical applications are in mobile

equipments, instrumentation, distributed power architectures in communication and

industrial electronics and everywhere where space on the PCB is critical.

http://www.tracopower.com Page 2 of 4

DC/DC Converters

THN 30 Series 30 Watt

Input Specifications

Input current at no load (at nominal input voltage) 12 V models: 12 mA typ

24 V models: 10 mA typ.

48 V models: 8 mA typ.

Start-up voltage 12 V models: < 9.0 VDC

24 V models: < 18 VDC

48 V models: < 36 VDC

Under voltage shut down (lock-out circuit) 12 V models: 8.0 VDC typ.

24 V models: 16 VDC typ.

48 V models: 33 VDC typ.

Surge voltage (1 sec. max.) 12 V models: 25 V max

24 V models: 50 V max.

48 V models: 100 V max.

Reflected input ripple current 30 mAp-p typ.

Conducted noise (input) EN 55022 level A, FCC part 15, level A with

external capacitor see: application note

ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV,

perf. criteria A

Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A

Fast transient / Surge EN 61000-4-4, ±2 kV, perf. criteria A

EN 61000-4-5, ±2 kV perf. criteria A

With external input capacitor e.g. Nippon

chemi-con KY 220 µF, 100 V, ESR 48 mOhm

Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A

Recommended input fuse (slow blow) 12 V models: 6300 mA

24 V models: 3150 mA

48 V models: 1600 mA

Output Specifications

Voltage set accuracy ±1 %

Output voltage adjustment range (see application note) 15 & 24 VDC models: +20 / –10 %

other single output models: ±10 %

Regulation – Input variation (Vmin – Vmax) single output models: 0.2 % max.

dual output models: 0.5 % max.

– Load variation (0 – 100 %) single output models: 0.2 % max.

dual output models balanced load: 1.0 % max.

dual output models unbalanced load (25% /100%): 5.0 % max.

Minimum load not required

Ripple and noise (measured with output capacitor) 3.3 & 5.0 VDC models: 75 mVp-p with (22µF/25V X7R 1812 MLCC)

(20 MHz bandwidth) 12 & 15 VDC models: 75 mVp-p with (2x 22µF/25V X7R 1812 MLCC)

24 VDC models: 75 mVp-p with (2x 6.8µF/50V X7R 1812 MLCC)

dual output models: 60 mVp-p with (10µF/50V X7R 1812 MLCC)

Temperature coefficient ±0.02 %/K

Output current limitation at 140 % of Iout max.

Short circuit protection hiccup, automatic recovery

Over voltage protection 3.3 VDC models: 3.7 – 5.4 Vout

5 VDC models: 5.6 – 7.0 Vout

12 VDC models: 13.5 – 19.6 Vout

15 VDC models: 18.3 – 22.0 Vout

24 VDC models: 29.1 – 32.5 Vout

Start up time (nominal Vin and constant resistive load) 30 ms max. (for power on and remote on)

Transient response setting time 250 µs typ. (25% load step change)

http://www.tracopower.com Page 3 of 4

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

DC/DC Converters

THN 30 Series 30 Watt

Output Specifications

Max. capacitive load 3.3 VDC models: 10’000 µF

5 VDC models: 7’200 µF

12 VDC models: 1’200 µF

15 VDC models: 1’000 µF

24 VDC models: 375 µF

±12 VDC models: 750 µF (each output)

±15 VDC models: 500 µF (each output)

General Specifications

Temperature ranges – Operating without heat sink –40°C to +80°C (with derating)

– Operating with heat sink –40°C to +85°C (with derating)

– Case temperature +105°C max.

– Storage –55°C to +125°C

Power derating – Operating without heat sink 2.2 %/K above +55°C

– Operating with heat sink 2.5 %/K above +60°C

Thermal impedance – Natural convection 15.0°C/W

– Natural convection with heat sink 13.8°C/W

Thermal protection shutdown at 115°C

Humidity (non condensing) 5 % to 95 % rel H max.

Reliability, calculated MTBF (MIL-HDBK-217F, at +70°C, ground benign) 1.3 Mio. h

Isolation voltage (60sec.) – Input/Output 1’500 VDC

– Input, Output/Case 1’000 VDC

Isolation capacitance – Input/Output 1’500 pF max.

Isolation resistance – Input/Output (500 VDC) >1 GOhm

Remote On/Off – On: 3.0 to 15 VDC or open circuit

– Off: 0 to 1.2 VDC or short circuit pin 6 and pin 2

– Off idle current: 2.0 mA

Switching frequency (fixed, pulse width modulation) 3.3 & 5.0 Vout models: 275 kHz ±10%

other models: 330 kHz ±10%

Vibration and thermal shock MIL-STD-810F

Safety approvals UL/cUL 60950-1 2nd +Am1, IEC/EN 60950-1

– Certification documents www.tracopower.com/overview/thn30

Physical Specifications

Casing material copper

Baseplate non conductive FR4

Potting material silicone (UL 94V-0 rated)

Weight 16.5 g (0.58oz)

Soldering temperature max. 265°C / 10sec.

Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf

– RoHS RoHS directive 2011/65/EU

Supporting documents: www.tracopower.com/overview/thn30

Page 4 of 4

Speciﬁcations can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com

www.tracopower.com

DC/DC Converters

THN 30 Series 30 Watt

Outline Dimensions

Dimensions in [mm], () = Inch

Pin diameter ø 1.0 (0.04)

Pin pitch tolerances: ±0.25 (±0.01)

Tolerances: ±0.5 (±0.02)

Rev. July 12, 2018

Pin-Out

Note:

The product label on converter has to be re-

moved before mounting the heat-sink.

For volume orders converters will be sup-

plied with heat-sink already mounted. Please

contact factory for quotation.

Separate heat-sinks are only available for

prototypes and small quantity orders.

Order code: THN-HS1

(cont.: heat-sink, thermal pad, 2 clamps)

Material: Aluminum

Finish: Anodic treatment (black)

Weight: 8 g (0.28oz) without converter

Thermal impedance after assembling: 14.8 K/W

Heat-Sink (Option)

31.0 (1.22) max.

14.5 (0.57)

16.5 (0.65)

max.

Converter

Heat-sink

Thermal pad

Clamp

25.4

Bottom view

20.32

7.62

5.6

(0.3)

(0.22)

(0.8)

(1.0)

5.08

(0.2)

9.9

(0.39)

2.5

(0.1)

10.16

(0.4)

2.5

(0.1)

10.16

(0.4)

Pin Single Dual

1+Vin (Vcc) +Vin (Vcc)

2–Vin (GND) –Vin (GND)

3+Vout +Vout

4Trim Common

5–Vout –Vout

6Remote On/Off

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

TRACO Power:

THN 30-2411 THN 30-2412 THN 30-2423 THN 30-1211 THN 30-2415 THN 30-1213 THN 30-1223 THN 30-4815

THN 30-4812 THN 30-4813 THN 30-1212 THN 30-4822 THN 30-1215 THN 30-1222 THN 30-4823 THN 30-2413

THN 30-2422 THN 30-2410 THN 30-1210 THN 30-4810 THN 30-4811