MASWSS0166 GaAs SPDT Switch DC - 3.0 GHz Rev. V2 Features Low Insertion Loss: 0.3 dB @ 900 MHz Low Current Consumption: <15 A @ +2.5 V Positive or Negative 2.5 to 8 V Control Lead-Free SOT-363 Package 100% Matte Tin Plating over Copper Halogen-Free "Green" Mold Compound 260C Reflow Compatible RoHS* Compliant Version of SW-437 Functional Schematic: Positive Control Voltage Description M/A-COM's MASWSS0166 is a GaAs monolithic switch in a lead-free SOT-363 surface mount plastic package. The MASWSS0166 is ideally suited for applications where very low power consumption, low insertion loss, very small size and low cost are required. Functional Schematic: Negative Control Voltage Typical applications are dual band systems that require switching between small signal components such as filter banks, single band LNA's and converters. The MASWSS0166 can be used in applications up to 0.25 Watts in systems such as cellular, PCS, DCS1800, GSM, CDMA, W-CDMA and other analog/digital wireless communications systems. The MASWSS0166 is fabricated using a mature 0.5 micron GaAs PHEMT process. The process features full passivation for increased performance and reliability. Pin Configuration Pin No. Function Description 1 RF1 RF in/out 2 GND RF Ground 3 RF2 RF in/out 4 V2 V Control 2 5 RFC RF Common 6 V1 V Control 1 Absolute Maximum Ratings 1,2 Parameter Absolute Maximum Input Power (0.5-3.0 GHz) 3 V Control 5 V Control +30 dBm +33 dBm Operating Voltage +8.5 Volts Operating Temperature -40C to +85C Storage Temperature -65C to +150C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. Ordering Information 3 Part Number Package MASWSS0166 Bulk Packaging MASWSS0166TR-3000 3000 piece reel MASWSS0166SMB Sample Test Board 3. Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0166 GaAs SPDT Switch DC - 3.0 GHz Rev. V2 Electrical Specifications: TA = 25C, Vc = 0 V / -2.5 V, Z0 = 50 4 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss DC - 1 GHz 1 - 2 GHz 2 - 3 GHz dB dB dB -- -- -- 0.3 0.4 0.55 0.4 0.5 0.7 Isolation DC - 1 GHz 1 - 2 GHz 2 - 3 GHz dB dB dB 19 13 10 21 15 12 -- -- -- VSWR DC - 3 GHz Ratio -- 1.2:1 -- P1dB 500 MHz - 3 GHz, Vc = 2.7 V dBm -- 24 -- P1dB 500 MHz - 3 GHz, Vc = 5 V dBm -- 27 -- Input IP2 2-Tone, 900 MHz, 5 MHz spacing, Vc = 2.7 V dBm -- 81 -- Input IP3 2-Tone 900 MHz, 5 MHz spacing, Vc = 2.7V dBm -- 55 -- Trise, Tfall Ton, Toff Transients 10% to 90% RF, 90% to 10% RF 50% Control to 90% RF, 50% Control to 10% RF In-Band nS nS mV -- -- -- 10 20 10 -- -- -- Control Current Vc = 2.5 V A -- 4 15 4. For positive voltage control, external DC blocking capacitors are required on all RF ports. Lead-Free SOT-363 Plastic Package Truth Table 5,6 V1 V2 RFC-RF1 RFC-RF2 0 1 On Off 1 0 Off On 5. Differential voltage, V(state 1) - V(state 0), must be +2.5 V minimum and must not exceed 8 V. 6. 0 = -8 V to 0 V, 1 = -5.5 V to 8 V Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Reference Application Note M538 for lead-free solder reflow recommendations. Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0166 GaAs SPDT Switch DC - 3.0 GHz Rev. V2 Typical Performance Curves Insertion Loss (Positive Voltage Control) Insertion Loss (Negative Voltage Control) 1.0 1.0 -40C +25C +85C 0.8 0.6 0.6 0.4 0.4 0.2 0.2 0.0 0.0 0.5 -40C +25C +85C 0.8 1.0 1.5 2.0 2.5 3.0 0.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 2.5 3.0 Frequency (GHz) Frequency (GHz) Isolation VSWR 40 1.5 35 Negative Control Positive Control 1.4 30 1.3 25 1.2 20 1.1 15 10 0.0 0.5 1.0 1.5 2.0 Frequency (GHz) 2.5 3.0 1.0 0.0 0.5 1.0 1.5 2.0 Frequency (GHz) 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0166 GaAs SPDT Switch DC - 3.0 GHz Rev. V2 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support