www.vishay.com
1
Model 533, 534, 535
Vishay Spectrol
Document Number: 57065
Revision 09-Jan-04
For technical questions, contact sfer@vishay.com
ADDITIONAL FEATURES
Special Resistance Tolerances to 1%
Rear Shaft Extensions and Support Bearing
Non Turn Lug
Dual Gang Configuration and Concentric Shafts
High Torque and Center Tap
Special Markings and Front Shaft Extensions
Servo Unit available and Slipping Clutch
7/8” (22mm) Precision
Wirewound Potentiometer
The Models 533 (3 turn), 534 (10 turn) and 535 (5 turn) can be ordered by stating
534 1 2 XXX
MODEL MOUNTING NUMBER OF SECTIONS RESISTANCE EIA CODE
1. Bushing 1. Single section
2. Servo 2. Dual section
ORDERING INFORMATION
PARAMETER MODEL 533 MODEL 534 MODEL 535
Resistance Range
Standard Values 50 to 20K100 to 100K50 to 50K
Capability Range 5 to 60K10 to 200K5 to 100K
Standard Tol ± 5% ± 5% ± 5%
Linearity (Independent) ± 0.25% 0.20% ± 0.25%
Noise 100 ENR 100 ENR 100 ENR
Rotation (Electrical & Mechanical) 1080° + 10% 3600° + 10% 1800° ± 10°
Power Rating (@ 70°C) 1.0 watts 2.0 watts 1.5 watts
Insulation Resistance 1000M minimum 500VDC
Dielectric Strength 1000VRMS minimum 60Hz
Absolute Minimum Resistance Not to exceed linearity x total resistance or 1,
whichever is greater
Tempco 20ppm/°C (standard values, wire only)
End Voltage 0.25% of total applied voltage, maximum
Phasing CCW end points - section 2 phased to section 1 within ± 2°
Taps Center tap only
ELECTRICAL SPECIFICATIONS
Unit Manufacturer’s name and model number,
Identification resistance value and tolerance, linearity
specification date code and terminal
identification
MARKING
Ohms
533: 50R, 100R, 200R, 500R, 1K, 2K, 5K, 10K, 20K
534: 100R, 200R, 500R, 1K, 2K, 5K, 10K, 20K, 50K, 100K
535: 50R, 100R, 200R, 500R, 1K, 2K, 5K, 10K, 20K, 50K
RESISTANCE VALUES
Note: The color of this product is changing to blue, during
the internal period you may recieve either black or blue.
Document Number: 57065
Revision 09-Jan-04
www.vishay.com
2
Model 533, 534, 535
Vishay Spectrol
For technical questions, contact sfer@vishay.com
SINGLE SECTION
DIMENSIONS in millimeters
7/8” (22mm) Precision
Wirewound Potentiometer
POWER RATING CHART
Mounting hardware, washer and panel nut, nickel plated
2
13
CW
ENVIRONMENTAL SPECIFICATIONS
Vibration 15g thru 2000Hz
Shock 50g
Rotational Life (Shaft Revolution)
533 300,000
534 1,000,000
534 (Servo) > 1,000,000
535 500,000
Load Life 900 Hours
Temperature Range
- 55°C to + 125°C
SCHEMATIC
RATED POWER IN (WATTS)
0 20 40 60 80 100 120 140 160
0
1
2
3
4
534
535
533
AMBIENT TEMPERATURE IN (°C)
MECHANICAL SPECIFICATIONS
PARAMETER
Bearing Type Bushing: Sleeve bearing Servo: Ball
Torque (maximums): starting 534 533/535
Section 1 0.5 oz - in (36gm - cms) 0.7 oz - in (50gm - cms)
Section 2 0.9 oz - in (65gm - cms) 1.1 oz - in (79gm - cms)
Torque (maximums): running 534 533/535
Section 1 0.4 oz - in (28.80gm - cms) 0.6 oz - in (43.20gm - cms)
Section 2 0.7 oz - in (50.40gm - cms) 0.9 oz - in (64.8gm - cms)
Weight (maximums)
Section 1 0.75 oz (21.26gm)
Section 2 1.25 oz (35.44gm)
Stop Strength 75 oz - in (static) (5.4Kgm - cm)
Ganging 2 sections maximum
0.750 (19.05) ± 0.015
0.312 (7.92) ± 0.015
0.062 (1.57)
0.200 MIN (5.08)
Ø 0.875 (22.22) ± 0.015
0.030 MAX (0.76)
0.812 (20.62) ± 0.031
Ø 0.2497 (6.34)
0.0000
- 0.0003
0.032 (0.81) X 0.032 (0.81) DP ± 0.010
3/8 - 32UNEF - 2A Ø 0.4062 (10.32)
0.0000
- 0.0020
9mm x 0.75 P
Ø 6.00mm
R 0.625 (15.88) MAX
30° TYP
12 3
SCREWDRIVER SLOT
0.000
- 0.007
METRIC
0.850 (21.59) ± 0.015 0.375 (9.52) ± 0.031
0.062 (1.57)
0.062 (1.57)
Ø 0.7500 (19.05) 0.0000
- 0.0005
Ø 0.875 (22.22)
Ø 0.1248 (3.17) 0.0000
- 0.0003
0.57 (1.45) MIN
0.300 (7.62) MIN
Ø 0.750 (19.05) MAX
Ø 0.875 (22.22) ± 0.015
213
0.062 (1.57)0.062 (1.57)
30° TYP
R 0.625 (15.88) MAX
www.vishay.com
3
Model 533, 534, 535
Vishay Spectrol
Document Number: 57065
Revision 09-Jan-04
For technical questions, contact sfer@vishay.com
RESISTANCE VALUE (
) RESOLUTION % OHMS PER TURN MAX CURRENT AT 70
°
C MAX VOLTAGE ACROSS COIL
AMBIENT (mA) (V)
533 534 535 533 534 535 533 534 535 533 534 535 533 534 535
50 50 0.149 0.120 0.0746 0.0603 141.0 173.0 7.07 8.66
100 100 100 0.111 0.060 0.075 0.1114 0.0603 0.0746 100.0 141.0 122.0 10.0 14.1 12.2
200 200 200 0.097 0.037 0.061 0.1954 0.0746 0.1220 70.7 100.0 86.6 14.1 20.0 17.3
500 500 500 0.069 0.031 0.049 0.3424 0.1520 0.2459 44.7 63.2 54.7 22.4 31.6 27.4
1K 1K 1K 0.063 0.025 0.041 0.6331 0.2459 0.4113 31.6 44.7 38.7 31.6 44.7 38.7
2K 2K 2K 0.041 0.021 0.031 0.8206 0.4113 0.6331 22.4 31.6 27.4 44.7 63.2 54.8
5K 5K 5K 0.044 0.016 0.034 2.2330 0.8206 1.7230 14.1 20.0 17.3 70.7 100.0 86.6
10K 10K 10K 0.034 0.017 0.030 3.4510 1.7230 3.0160 10.0 14.1 12.2 100.0 141.0 122.0
20K 20K 20K 0.031 0.015 0.020 6.1790 3.0160 3.9910 7.07 10.0 8.66 141.0 200.0 173.0
50K 50K 0.009 0.015 4.6690 7.4560 6.32 5.47 316.0 274.0
100K 0.007 7.4560 4.47 447.0
––––––
––––––
RESISTANCE ELEMENT DATA
7/8” (22mm) Precision
Wirewound Potentiometer
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.