FCN-260Z Series microGiGaCN(R) I/O JACK 4x and 12x test board kits for Electrical Evaluation / Validation 4X TEST BOARD KIT WITH LATCHES - includes 2 test boards for INFINIBAND, 10G Ethernet PART NUMBER FCN-268Z008 50 (1.969) 30 (1.181) (6.9) [0.272] 35 (1.378) 50 (1.969) 120 (4.724) DIMENSIONS 50 (1.969) 88 (.3465) 100 (3.937) 5.05 (0.197) 100 (3.937) 100 (3.937) microGiGaCNTM I/O Jack 4X for InfinibandSM 4X (24.85) [0.978) (10.9)[0.489] (1.6)[0.063] 4.45 (0.175) 10.5 (0.413) Unit: mm (in.) Notes: *: this test board is for electrical characterization only, it is not designed for manufacturing testing purposes. **: SMA connector is mounted to all SMA patterns. Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 1 FCN-268Z0xx Series 4X TEST BOARD KIT WITH THUMBSCREWS - includes 2 test boards for SAS, SATA-2, 10G Fiber Channel PART NUMBER FCN-268Z008-TS 120 (4.724) DIMENSIONS 30 (1.181) 50 (1.969) 4-O3 (0.118) (T.H.) 50 (1.969) 100 (3.937) 100 (3.937) 100 (3.937) 6 inches test pattern microGiGaCNTM I/O Jack 4X for InfinibandSM 4X 10.5 (0.413) Notes: *: this test board is for electrical characterization only, it is not designed for manufacturing testing purposes. 1.6 (0.063) (10.825) [0.426] 5.05 (0.197) 4.45 (0.175) 3 inches test pattern (29.7) [1.169] **: SMA connector is mounted to all SMA patterns. 24 (0.945) Unit: mm (in.) SIGNAL ASSIGNMENT Signal Assignment Pair Number 4X Jack SMA Note Pair Number S1 1 Pattern length 3 inches 5 1 S2 2 S3 3 S4 4 S5 5 2 SMA S9 9 S10 10 S11 11 S12 12 S13 13 S14 14 S15 15 6 3 Note Pattern length 3 inches 7 S6 6 S7 7 4 - 4X Jack 8 S8 8 G1-G9 Ground Specifications subject to change Common - S16 16 G1-G9 Ground Dimensions are in millimeters (inches) Common www.fcai.fujitsu.com 2 FCN-268Z0xx Series 12X TEST PCB KIT WITH LATCHES - compromised of 4 test cards for Infiniband, others PART NUMBER FCN-268Z024 DIMENSIONS Test pattern for S25-48*** (2 each) All SMA connectors: Mount type A (see drawing below) 92.5 (3.642) 83 (3.268) 92.5 (3.642) 114 (4.488) 192.9 (7.594) (6.9) [0.272] Test pattern for S1-24*** (2 each) SMA1-SMA24: Mount type A (see bottom drawing) SMA49 - SMA56: Mount type B (see bottom drawing) 1.6 (0.063) 34.2 (1.346) 71.4 (2.811) (10.9) [0.429] 88 (3.465) 26.5 (1.043) 53.8 (2.118) (48.85) [1.923] Unit: mm (in.) Notes: *: this test board is for electrical characterization only, it is not designed for manufacturing testing purposes. **: SMA connector is mounted to all SMA patterns. 10.5 (0.413) I/O JACK mount surface 2.85 (0.112) ***: This test board kit is used for the measurement of all signal by two boards one set. Though P.C.B. is the same, the mount side of the connector becomes opposite of the two test boards. 10.5 (0.413) 6.65 (0.261) 4.45 (0.175) 5.05 (0.199) I/O JACK mount surface Unit: mm (in.) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 3 FCN-268Z0xx Series 12X TEST PCB KIT WITH THUMBSCREWS - compromised of 4 test cards for SAS, SATA-2, 10G Fiber Channel PART NUMBER FCN-268Z024-TS DIMENSIONS Test pattern for S25-48*** (2 each) All SMA connectors: Mount type A (see drawing below) 192.9 (7.594) (6.9) [0.272] (8.2)[0.323] Test pattern for S1-24*** (2 each) SMA1-SMA24: Mount type A (see bottom drawing) SMA49 - SMA56: Mount type B (see bottom drawing) 83 (3.268) 92.5 (3.630) 114 (4.488) 92.5 (3.642) 2-O3 (0.118) (T.H.) (10.825) [0.426] 64.6 (2.543) 88 (3.465) microGiGaTM I/O Jack for InfinibandSM 12X 1.6 (0.063) Unit: mm (in.) (48) [1.890] (53.7) [2.114] 2.85 (0.112) **: SMA connector is mounted to all SMA patterns. 10.5 (0.413) 10.5 (0.413) I/O JACK mount surface 6.65 (0.261) 4.45 (0.175) I/O JACK mount surface 5.05 (0.199) Notes: *: this test board is for electrical characterization only, it is not designed for manufacturing testing purposes. ***: This test board kit is used for the measurement of all signal by two boards one set. Though P.C.B. is the same, the mount side of the connector becomes opposite of the two test boards. Unit: mm (in.) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 4 FCN-268Z0xx Series SIGNAL ASSIGNMENT Signal Assignment Pair Number 12X Jack SMA S1 1 Note Pair Number 12X Jack SMA Note S25 1 13 S2 2 S3 3 S26 S27 2 14 S4 4 S5 5 S28 S29 3 15 S6 6 S7 7 S30 S31 4 16 S8 8 S9 9 S32 S33 5 17 S10 10 S11 11 6 S12 12 S13 13 S34 S35 Pattern length 3 inches 18 Pattern length 3 inches S36 S37 7 19 S14 14 S15 15 S38 S39 8 20 S16 16 S17 17 S40 S41 9 21 S18 18 S19 19 S42 S43 10 22 S20 20 S21 21 S44 S45 11 23 S22 22 S23 23 S46 S47 12 24 S24 24 - - - Specifications subject to change S48 - Dimensions are in millimeters (inches) - G1-G25 Ground www.fcai.fujitsu.com Common 5 FCN-268Z0xx Series Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com (c) 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 06/30/2004. Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 6