A1
MPDB Series Open-Style Power Distribution Blocks
The Next Generation Power Distribution Block (PDB)
Mersen power distribution blocks provide a safe and easy method of splicing cables,
splitting primary power into secondary circuits and fullling requirements for xed
junction tap-off points. All blocks are UL and CSA approved while meeting spacing
requirements for feeder and branch circuits in conjunction with UL508A and the National
Electrical Code®. PDB options include single or dual conductor primary inputs and up to
30 secondary outputs. Specialty blocks are available allowing for up to 7 primary inputs.
The MPDB series is offered in three size categories: miniature (MPDB62 and MPDB63
series), intermediate (MPDB66 and MPDB67 series), and large (MPDB68 and MPDB69
series), in both aluminum and copper.
Features/Benefits:
•Adder Poles
All sizes have optional adder poles for increased exibility and ease-of-use. Adder
poles can be stacked to form multi-pole units in the eld without the use of tools.
Adder poles allow for customization of primary and secondary wire combinations.
End barriers are also available for sale, catalog numbers can be found in the
catalog number selection tables for each size block.
•Wire Connectors
Standard aluminum and copper wire connectors are available. Aluminum
connectors accept both AL or CU wire while copper connectors accept CU wire
only. Connectors are all 1-piece tin-plated.
•Insulators
Insulators are virtually unbreakable, made of glass-lled polycarbonate. “See-
through,” hinged safety covers are optional and provide a greater degree of safety
and shock resistance where required. Hinged covers can be installed without tools.
•Spacings
1 inch through air and 2 inches over surface between uninsulated live parts of
opposite polarity meets requirements for feeder and branch circuit applications of
UL508A.
•Safety Covers
Polycarbonate safety covers provide dead-front protection. One cover is needed
for each pole. Each cover has a test probe hole in the center for circuit checking.
Covers are optional accessories and catalog numbers can be found in the catalog
selection tables for each size block.
Additional Specifications:
Wire Type: Copper Blocks: 60/75ºC Solid/Stranded CU
Aluminum Blocks: 60/75/90ºC Solid/Stranded AL and CU
Connector: Copper Blocks: Highly conductive tin-plated copper
Aluminum Blocks: Highly conductive tin-plated aluminum
Insulating Material: Glass-lled polycarbonate with veried dielectric strength
in excess of 2500V
Flammability: UL94-V0
Mounting: Direct panel mount
Environmental: RoHS compliant, Lead Free
Ratings:
Volts : 600VAC/DC
Amps : 65 to 2260A
based on NEC table
310.15(B)(16) 75ºC
ampacities
SCCR : 100kA with properly
sized fuse
(See Mersen’s PDB SCCR
guide at ep-us.mersen.com
or contact Mersen technical
services)
Approvals:
•UL Listed to subject 1953,
File E352417
•CSA Certified Class 6228 01
Available
Now!