MG200J6ES61 MITSUBISHI IGBT Module MG200J6ES61(600V/200A 6in1) High Power Switching Applications Motor Control Applications * Integrates inverter power circuit in to a single package. * The electrodes are isolated from case. * Low thermal resistance * VCE (sat) =2.0 V (typ.) Equivalent Circuit P CN-1:7 CN-1:6 CN-1:4 CN-1:2 CN-1:5 CN-1:3 CN-1:1 CN-2:3 CN-2:2 CN-2:1 CN-1:8 U V W CN-2:4 N Signal Terminal CN-1 1. E (W) 2. G (W) 3. E (V) 4. G (V) 5. E (U) 6. G (U) 7. TH1 8. TH2 G (Z) 2. G (Y) 3. G (X) 4. E (L) CN-2 1. 1 2005-04-01 MG200J6ES61 Package Dimensions: 1 3 5 7 2 4 6 8 4 3 2 1 CN-1 1. E (W) 2. G (W) 3. E (V) 4. G (V) 5. E (U) 6. G (U) 7. TH1 8. TH2 G (Z) 2. G (Y) 3. G (X) 4. E (L) CN-2 1. 2 2005-04-01 MG200J6ES61 Maximum Ratings (Ta = 25C) Stage Characteristics Symbol Rating Unit Collector-emitter voltage VCES 600 V Gate-emitter voltage VGES 20 V DC IC 200 1 ms ICP 400 DC IF 200 1 ms IFM 400 Collector power dissipation (Tc = 25C) PC 1000 W Junction temperature Tj 150 C Storage temperature range Tstg -40~125 C Isolation voltage Visol 2500 (AC 1 min) V 3 (M5) N*m Collector current Inverter Forward current Module Screw torque A A Electrical Characteristics (Tj = 25C) 1. Inverter stage Characteristics Symbol Test Condition Min Typ. Max Unit Gate leakage current IGES VGE = 20 V, VCE = 0 500 nA Collector cut-off current ICES VCE = 600 V, VGE = 0 1.0 mA 5.0 6.5 8.0 V Tj = 25C 2.0 2.4 Tj = 125C 2.6 40000 1.00 1.20 0.50 0.30 2.2 2.6 V Min Typ. Max Unit ITM = 0.2 mA 100 k Tc = 25C/Tc = 85C 4390 K Inverter IGBT stage 0.125 Inverter FRD stage 0.195 0.013 Gate-emitter cut-off voltage VGE (off) VCE = 5 V, IC = 200 mA Collector-emitter saturation voltage VCE (sat) VGE = 15 V, IC = 200 A Input capacitance Cies Turn-on delay time Switching time Turn-off time Fall time VCE = 10 V, VGE = 0, f = 1 MHz td (on) toff tf Reverse recovery time trr Forward voltage VF VCC = 300 V, IC = 200 A VGE = 15 V, RG = 10 (Note 1) IF = 200 A V pF s Note 1: Switching time test circuit & timing chart 2. Module (Tc = 25C) Characteristics Zero-power resistance Symbol R25 B value B25/85 Junction to case thermal resistance Rth (j-c) Case to fin thermal resistance Test Condition Rth (c-f) 3 C/W C/W 2005-04-01 MG200J6ES61 Switching Time Test Circuit & Timing Chart 90% VGE 10% RG -VGE VCC Irr 90% trr IC RG 10% td (on) 10% td (off) tf Recommneded conditions for application Characteristics Symbol Min Typ. Max Unit P-N power terminal supply voltage VCC 300 400 V Gate voltage VGE 13.5 15 16.5 V fc 20 kHz Switching frequency 4 2005-04-01