Advanced Power N-CHANNEL ENHANCEMENT MODE
Electronics Corp. POWER MOSFET
▼ 100% Avalanche Test BVDSS 600V
▼ Fast Switching Characteristics RDS(ON) 5Ω
▼ Simple Drive Requirement ID2A
▼ RoHS Compliant & Halogen-Free
Description
Absolute Maximum Ratings
Symbol Units
VDS Drain-Source Voltage V
VGS Gate-Source Voltage V
ID@TC=25℃Continuous Drain Current, VGS @ 10V A
IDM Pulsed Drain Current1A
PD@TC=25℃Total Power Dissipation W
W/℃
EAS Single Pulse Avalanche Energy2mJ
IAR Avalanche Current A
TSTG ℃
TJOperating Junction Temperature Range ℃
Thermal Data
Symbol Value Unit
Rthj-c Maximum Thermal Resistance, Junction-case 6.25 ℃/W
Rthj-a Maximum Thermal Resistance, Junction-ambient 65 ℃/W
Data & specifications subject to change without notice
AP4002I-HF
-55 to 150
2
8
20
Halogen-Free Product
0.16
Parameter
1
200909013
Parameter Rating
600
+30
-55 to 150
20
2
Linear Derating Factor
Storage Temperature Range
G
D
S
GDSTO-220CFM(I)
A
P4002 series are specially designed as main switching devices for
universal 90~265VAC off-line AC/DC converter applications.
TO-220CFM type provide high blocking voltage to overcome voltage surge
and sag in the toughest power system with the best combination of fast
switching,ruggedized design and cost-effectiveness.
Electrical Characteristics@Tj=25oC(unless otherwise specified)
Symbol Parameter Test Conditions Min. Typ. Max. Units
BVDSS Drain-Source Breakdown Voltage VGS=0V, ID=1mA 600 - - V
RDS(ON) Static Drain-Source On-Resistance3VGS=10V, ID=1.0A - - 5 Ω
VGS(th) Gate Threshold Voltage VDS=VGS, ID=250uA 2 - 4 V
gfs Forward Transconductance VDS=10V, ID=2.0A - 1.5 - S
IDSS Drain-Source Leakage Current VDS=600V, VGS=0V - - 100 uA
IGSS Gate-Source Leakage VGS=+30V, VDS=0V - - +1 uA
QgTotal Gate Charge3ID=2A - 12 19 nC
Qgs Gate-Source Charge VDS=480V - 2 - nC
Qgd Gate-Drain ("Miller") Charge VGS=10V - 5.5 - nC
td(on) Turn-on Delay Time3VDD=200V - 10 - ns
trRise Time ID=1A - 12 - ns
td(off) Turn-off Delay Time RG=50Ω,VGS=10V - 52 - ns
tfFall Time RD=200Ω-19-ns
Ciss Input Capacitance VGS=0V - 375 600 pF
Coss Output Capacitance VDS=10V - 170 - pF
Crss Reverse Transfer Capacitance f=1.0MHz - 45 - pF
Source-Drain Diode
Symbol Parameter Test Conditions Min. Typ. Max. Units
VSD Forward On Voltage3Tj=25℃, IS=2A, VGS=0V - - 1.5 V
trr Reverse Recovery Time3IS=2A, VGS=0V, - 340 - ns
Qrr Reverse Recovery Charge dI/dt=100A/µs - 2.2 - uC
Notes:
1.Pulse width limited by Max. junction temperature.
2.Starting Tj=25oC , VDD=50V , L=10mH , RG=25Ω
3.Pulse test
THIS PRODUCT IS SENSITIVE TO ELECTROSTATIC DISCHARGE, PLEASE HANDLE WITH CAUTION.
USE OF THIS PRODUCT AS A CRITICAL COMPONENT IN LIFE SUPPORT OR OTHER SIMILAR SYSTEMS IS NOT AUTHORIZED.
APEC DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED
HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
APEC RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN.
AP4002I-HF
2
Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics
Fig 3. Normalized BVDSS v.s. Junction Fig 4. Normalized On-Resistance
Temperature v.s. Junction Temperature
Fi
g
5. Forward Characteristic o
f
Fig 6. Gate Threshold Voltage v.s.
Reverse Diode Junction Temperature
3
AP4002I-HF
0.8
0.9
1
1.1
1.2
-50 0 50 100 150
Tj , Junction Temperature ( oC)
Normalized BVDSS (V)
0
1
2
3
-50 0 50 100 150
Tj , Junction Temperature ( oC )
Normalized RDS(ON)
ID=1A
VG=10V
0
0.5
1
1.5
2
04812
VDS , Drain-to-Source Voltage (V)
ID , Drain Current (A)
TC=25oC10V
7.0V
6.0V
5.0V
VG=4.5V
0
0.5
1
1.5
2
0 4 8 1216202428
VDS , Drain-to-Source Voltage (V)
ID , Drain Current (A)
TC=150oC10V
7.0V
6.0V
5.0V
VG=4.5V
0
2
4
6
8
10
0 0.2 0.4 0.6 0.8 1 1.2 1.4
VSD , Source-to-Drain Voltage (V)
IS (A)
Tj = 150oCTj = 25 oC
0.4
0.6
0.8
1
1.2
1.4
-50 0 50 100 150
Tj , Junction Temperature ( o C )
Normalized VGS(th) (V)
AP4002I-HF
Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics
Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance
Fig 11. Switching Time Waveform Fig 12. Gate Charge Waveform
4
0.01
0.1
1
10
1 10 100 1000
VDS , Drain-to-Source Voltage (V)
ID (A)
TC=25oC
Single Pulse
100us
1ms
10ms
100ms
1s
DC
0.01
0.1
1
0.00001 0.0001 0.001 0.01 0.1 1 10
t , Pulse Width (s)
Normalized Th e rmal Re sponse (Rthjc)
PDM
Duty factor = t/T
Peak Tj = PDM x Rthjc + TC
t
T
0.02
0.01
0.05
0.1
0.2
Duty factor=0.5
Single Pulse
0
2
4
6
8
10
12
0481216
QG , Total Gate Charge (nC)
VGS , Gate to Sourc e Voltage ( V)
ID=2A
VDS =480V
10
100
1000
1 5 9 13 17 21 25 29
VDS , Drain-to-Source Voltage (V)
C (pF)
f
=1.0MH
z
Ciss
Coss
Crss
td(on) trtd(off)tf
VDS
VGS
10%
90%
Q
VG
10V
QGS QGD
QG
Charge
Operation in this area
limited by RDS(ON)
