SanRex®
Three Phase Rectifier Bridge Module
(Low Profile of 17mm height)
IF(AV)= 100A, VRRM= 800- 1800V
SanRex Three Phase Rectifier Bridge Module DF100AC series
is designed for applications requiring low profile converter-
inverter circuit designs. Thanks to the 17mm flat case height
design, the DF100AC series can be connected with IGBT
or MOSFET modules at the same 17mm case height. This
advantage typically reduces the needed parts and manufacturing
cost. It also enables level parallel connections for larger capacity,
contributes reducing stray inductance, improving high efficiency
and reliability.
Features
* Low Case Height of 17mm
* Enable easy parallel connecti on
* Very Low Forward Voltage Drop
* High Surge Current Capability
* RoHS Compliance
Typical Applications
* Welding and Plasma Cutting Machines
* Battery Chargers
* Power Supplies
* Motor Controls
< Maximum Ratings > Tj = 25°C (unless otherwise noted)
Symbol Item DF100AC80 DF100AC160 DF100AC180 Unit
VRRM Repetitive Peak Reverse
Voltage 800 1600 1800 V
VRSM Non-Repetitive Peak
Reverse Voltage 960 1700 1900 V
Symbol Item Conditions Ratings Unit
IF(AV) Average Forward Current Three phase, Full wave, T C = 106°C 100 A
IFSM Surge Forward Curre nt 1cycle, 60Hz, Peak value, non -
repetitive 1300 A
I 2 t I 2 t (for fusing) Value for one cycle surge current 7000 A2s
Tj Junction Temperature -40 to +150 °C
Tstg Storage Temperature -40 to +125 °C
VISO Isolation Voltage (R.M.S.) A.C. 1 minute 2500 V
Mounting M5 Recommended 1.5-2.5 2.7 Mounting
Torque Terminal M5 Recommended 1.5-2.5 2.7 N·m
Mass Typical Value 130 g
SanRex 50 Seaview Blvd. Port Washington, N Y 11050-4618 PH.(516)625-131 3 F AX(516)625-8845 Web : www.sanrex.com
DF100AC series
Internal schematic diagram
Isolated Packa
e
PDF Trial
http://store.iiic.cc/