117
©2010 Littelfuse, Inc
Revised: May 10, 2010 09:33 PM
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
Qxx25xx & Qxx25xHx Series
25 Amp Standard & Alternistor (High Commutation) Triacs
25 A TRIACs
Qxx25xx & Qxx25xHx Series
Description
25 Amp bi-directional solid state switch series is designed
for AC switching and phase control applications such as
motor speed and temperature modulation controls, lighting
controls, and static switching relays.
Standard type devices normally operate in Quadrants I & III
triggered from AC line.
Alternistor type devices only operate in quadrants I, II, & III
and are used in circuits requiring high dv/dt capability.
Features & Benefits
t3P)4DPNQMJBOU
t(MBTToQBTTJWBUFE
junctions
t7PMUBHFDBQBCJMJUZVQ
to 1000 V
t4VSHFDBQBCJMJUZVQ
to 250 A
Main Features
Symbol Value Unit
IT(RMS) 25 A
VDRM/VRRM 1000 V
IGT 50 to 80 mA
Schematic Symbol
MT2 MT1
G
Agency Approval
Agency Agency File Number
®
TO-220L, TO-218K, TO-218J &
Fastpak Packages: E71639 Applications
Excellent for AC switching and phase control applications
such as heating, lighting, and motor speed controls.
Typical applications are AC solid-state switches, industrial
power tools, exercise equipment, white goods and
commercial appliances.
Alternistor Triacs (no snubber required) are used in
applications with extremely inductive loads requiring
highest commutation performance.
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
®
118
Revised: May 10, 2010 09:33 PM
©2010 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
25 Amp Standard & Alternistor (High Commutation) Triacs
Qxx25xx & Qxx25xHx Series
Absolute Maximum Ratings – Standard Triac
Symbol Parameter Test Conditions Value Unit
IT(RMS) RMS on-state current
Qxx25R5
Qxx25N5 TC = 85°C 25 A
Qxx25P5 TC = 57°C
ITSM Peak non-repetitive surge current
Qxx25R5
Qxx25N5
single half cycle; f = 50Hz;
TJ (initial) = 25°C 167
A
single half cycle; f = 60Hz;
TJ (initial) = 25°C 200
Qxx25P5
single half cycle; f = 50Hz;
TJ (initial) = 25°C 220
single half cycle; f = 60Hz;
TJ (initial) = 25°C 250
I2tI
2t Value for fusing
Qxx25R5
Qxx25N5 tp = 8.3ms 166 A2s
Qxx25P5 260
di/dt Critical rate-of-rise of on-state current f = 60Hz; TJ =125°C 100 A/s
IGTM Peak gate current TJ = 125°C 2A
PG(AV) Average gate power dissipation TJ = 125°C 0.5 W
Tstg Storage temperature range -40 to 125 °C
TJOperating junction temperature range
Qxx25R5
Qxx25N5 -40 to 125 °C
Qxx25P5 -25 to 125
Absolute Maximum Ratings – Alternistor Triac
Symbol Parameter Test Conditions Value Unit
IT(RMS) RMS on-state current
Qxx25LH5
Qxx25L6 TC = 65°C
25 A
Qxx25K6
Qxx25J6 TC = 85°C
Qxx25RH5
Qxx25NH5
Qxx25R6
Qxx25NH6
TC = 95°C
ITSM Peak non-repetitive surge current
single half cycle; f = 50Hz;
TJ (initial) = 25°C 208
A
single half cycle; f = 60Hz;
TJ (initial) = 25°C 250
I2tI
2t Value for fusing tp = 8.3ms 260 A2s
di/dt Critical rate-of-rise of on-state current f = 60Hz; TJ =125°C 100 A/s
IGTM Peak gate current TJ = 125°C 2 A
PG(AV) Average gate power dissipation TJ = 125°C 0.5 W
Tstg Storage temperature range -40 to 125 °C
TJOperating junction temperature range -40 to 125 °C
Note: xx = voltage
119
©2010 Littelfuse, Inc
Revised: May 10, 2010 09:33 PM
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
Qxx25xx & Qxx25xHx Series
25 Amp Standard & Alternistor (High Commutation) Triacs
25 A TRIACs
Electrical Characteristics (T
J = 25°C, unless otherwise specified) — Standard Triac
Symbol Test Conditions Quadrant
Value
Unit
Qxx25R5
Qxx25N5 Qxx25P5
IGT
VD = 12V; RL = 60 8
I – II – III MAX. 50 mA
IV TYP. 120
VGT
I – II – III MAX. 1.3 V
IV TYP. 2.5
VGD VD = VDRM; RL = 3.3 k8 ; TJ = 125°C ALL MIN. 0.2 V
IHIT = 400mA (initial) MAX. 100 50 mA
dv/dt VD = VDRM; Gate Open; TJ = 125°C
400V
MIN.
275 —
V/s
600V 225 475
800V 200 400
VD = VDRM; Gate Open; TJ = 100°C 1000V 200 —
(dv/dt)c (di/dt)c = 13.3 A/ms; TJ = 125°C MIN. 5 V/s
tgt IG = 2 x IGT
; PW = 15µs; IT = 35.4 A TYP. 4 3 s
Symbol Test Conditions Quadrant
Value
Unit
Qxx25RH5
Qxx25LH5
Qxx25NH5
Qxx25R6
Qxx25L6
Qxx25NH6
Qxx25K6
Qxx25J6
IGT VD = 12V; RL = 60 8
I – II – III MAX. 50 80 mA
VGT I – II – III MAX. 1.3 V
VGD VD = VDRM; RL = 3.3 k8 ; TJ = 125°C I – II – III MIN. 0.2 V
IHIT = 400mA (initial) MAX. 50 100 mA
dv/dt VD = VDRM; Gate Open; TJ = 125°C
400V
MIN.
575 600
V/s
600V 500 600
800V 400 475
VD = VDRM; Gate Open; TJ = 100°C 1000V — 400
(dv/dt)c (di/dt)c = 13.3 A/ms; TJ = 125°C MIN. 20 30 V/s
tgt IG = 2 x IGT
; PW = 15µs; IT = 35.4 A TYP. 3 5 s
Electrical Characteristics (T
J = 25°C, unless otherwise specified) — Alternistor Triac
Symbol Test Conditions
Value
Unit
Qxx25R5
Qxx25N5
Qxx25xH5
Qxx25x6
Qxx25NH6
Qxx25P5
VTM IT = 35.4A; tp = 380 s MAX. 1.8 1.4 V
IDRM / IRRM VDRM / VRRM
TJ = 25°C 600 – 800V
MAX.
10 100
A
1000V 20 —
TJ = 100°C 600 – 800V 500 —
1000V 1000 —
TJ = 125°C 600 – 800V 2000 5000
Note: xx = voltage, x = package
Static Characteristics
120
Revised: May 10, 2010 09:33 PM
©2010 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
25 Amp Standard & Alternistor (High Commutation) Triacs
Qxx25xx & Qxx25xHx Series
Thermal Resistances
Symbol Parameter Value Unit
RR(J-C) Junction to case (AC)
Qxx25R5 / Qxx25N5
Qxx25R6 / Qxx25NH6
Qxx25RH5 / Qxx25NH5
0.89
°C/W
Qxx25P5 1.6
Qxx25L6 / Qxx25LH5 2.0
Qxx25K6 / Qxx25J6 1.32
RR(J-A) Junction to ambient Qxx25Ry 45 °C/W
Qxx25L6 / Qxx25LH5 50
Note: xx = voltage, y = sensitivity
Figure 1: Normalized DC Gate Trigger Current
vs. Junction Temperature
Figure 2: Normalized DC Gate Trigger Voltage
vs. Junction Temperature
0.0
0.5
1.0
1.5
2.0
-40 -1510 3560 85110 125
Junction Temperature (TJ) -- (ºC)
Ratio of VGT / VGT(TJ = 25ºC)
0.0
0.5
1.0
1.5
2.0
2.5
-40 -1510 3560 85110 125
Junction Temperature (T
J
) -- (°C)
Ratio of I
GT
/I
GT
(T
J
= 25
°
C)
Figure 3: Normalized DC Holding Current
vs. Junction Temperature
Figure 4: On-State Current vs. On-State
Voltage (Typical)
0.0
0.5
1.0
1.5
2.0
-40 -1510 3560 85110 125
Junction Temperature (TJ) -- (ºC)
Ratio of I
H
/ I
H
(T
J
= 25
º
C)
TJ = 25°C
0
10
20
30
40
50
60
70
80
90
0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.51.6 1.7
Instantaneous On-state Voltage (vT) – Volts
Instantaneous On-state Current (iT) – Amps
Qxx25R5
Qxx25N5
Qxx25P5/Qxx25R6
Qxx25L6/Qxx25NH6
Qxx25K6/Qxx25J6
Qxx25RH5/Qxx25LH5
Qxx25NH5
121
©2010 Littelfuse, Inc
Revised: May 10, 2010 09:33 PM
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
Qxx25xx & Qxx25xHx Series
25 Amp Standard & Alternistor (High Commutation) Triacs
25 A TRIACs
Figure 5: Power Dissipation (Typical) vs. RMS
On-State Current
Figure 6: Maximum Allowable Case Temperature
vs. RMS On-State Current
0
20
40
60
80
100
120
0.0 0.51.0 1.52.0 2.5
RMS On-State Current [IT(R MS)] -- Amps
Maximum Allowable Ambient Temperature
(TA) --°C
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
FREE AIR RATING
Figure 7: Maximum Allowable Ambient Temperature vs. RMS On-State Current (TO-220 packages only)
10
100
1000
1 10 100 1000
Surge Current Duration -- Full Cycles
Peak Surge (Non-repetitive)
On-state Current (ITSM) – Amps
Qxx25R5
Qxx25N5
Qxx25P5/Qxx25R6
Qxx25L6/Qxx25NH6
Qxx25K6/Qxx25J6
Qxx25RH5/Qxx25LH5
Qxx25NH5
Figure 8: Surge Peak On-State Current vs. Number of Cycles
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated Value at
Specified Case Temperature
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
0
5
10
15
20
25
30
35
0510 1520 25
RMS On-State Current [IT(R MS)] -- Amps
Average On-State Power Dissipation
[PD(AV)] -- Watts
Qxx25R5
Qxx25N5
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
Qxx25P5/Qxx25R6
Qxx25L6/Qxx25NH6
Qxx25K6/Qxx25J6
Qxx25RH5/Qxx25LH5
Qxx25NH5
50
60
70
80
90
100
110
120
130
RMS On-State Current [I
T(R MS)
] - Amps
Maximum Allowable Case Temperature
(TC) - °C
0510 1520 2530
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
Qxx25R5
Qxx25N5
Qxx25K6
Qxx25J6
Qxx25L6
Qxx25LH5
Qxx25P5
Qxx25R6
Qxx25NH6
Qxx25RH5
Qxx25NH5
122
Revised: May 10, 2010 09:33 PM
©2010 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
25 Amp Standard & Alternistor (High Commutation) Triacs
Qxx25xx & Qxx25xHx Series
Soldering Parameters
Reflow Condition Pb – Free assembly
Pre Heat
- Temperature Min (Ts(min))150°C
- Temperature Max (Ts(max))200°C
- Time (min to max) (ts)60 – 180 secs
Average ramp up rate (Liquidus Temp)
(TL) to peak 5°C/second max
TS(max) to TL - Ramp-up Rate 5°C/second max
Reflow - Temperature (TL) (Liquidus) 217°C
- Temperature (tL)60 – 150 seconds
Peak Temperature (TP)260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)20 – 40 seconds
Ramp-down Rate 5°C/second max
Time 25°C to peak Temperature (TP)8 minutes Max.
Do not exceed 280°C
Physical Specifications Environmental Specifications
Test Specifications and Conditions
High Temperature
Voltage Blocking
MIL-STD-750: Method 1040, Condition A
Rated VRRM, 125°C, 1008 hours
Temperature Cycling
MIL-STD-750: Method 1051
-40°C to 125°C, 15-minute dwell,
100 cycles
Biased Temp &
Humidity
EIA/JEDEC: JESD22-A101
320VDC, 85°C, 85%RH, 1008 hours
High Temp. Storage MIL-STD-750: Method 1031
150°C, 1008 hours
Low-Temp Storage -40°C, 1008 hours
Thermal Shock
MIL-STD-750: Method 1056
0°C to 100°C, 5-minute dwell,
10-second transfer, 10 cycles
Autoclave
(Pressure Cooker Test)
EIA/JEDEC: JESD22-A102
121°C, 100%RH, 2atm, 168 hours
Resistance to
Solder Heat
MIL-STD-750: Method 2031
260°C, 10 seconds
Solderability ANSI/J-STD-002, Category 3, Test A
Lead Bend MIL-STD-750: Method 2036, Condition E
Terminal Finish 100% Matte Tin-plated
Body Material UL recognized epoxy meeting flammability
classification 94V-0
Lead Material Copper Alloy
Design Considerations
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of the Thyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
Time
Temperature
TP
TL
TS(max)
TS(min)
25
tP
tL
tS
time to peak temperature
Preheat
P
reheat
Ramp-up
Ramp-up
Ramp-down
R
amp-
do
123
©2010 Littelfuse, Inc
Revised: May 10, 2010 09:33 PM
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
Qxx25xx & Qxx25xHx Series
25 Amp Standard & Alternistor (High Commutation) Triacs
25 A TRIACs
Dimensions — TO-220AB (R Package) — Non-isolated Mounting Tab
Dimension Inches Millimeters
Min Max Min Max
A 0.380 0.420 9.65 10.67
B 0.105 0.115 2.67 2.92
C 0.230 0.250 5.84 6.35
D 0.590 0.620 14.99 15.75
E 0.142 0.147 3.61 3.73
F 0.110 0.130 2.79 3.30
G 0.540 0.575 13.72 14.61
H 0.025 0.035 0.64 0.89
J 0.195 0.205 4.95 5.21
K 0.095 0.105 2.41 2.67
L 0.060 0.075 1.52 1.91
M 0.085 0.095 2.16 2.41
N 0.018 0.024 0.46 0.61
O 0.178 0.188 4.52 4.78
P 0.045 0.060 1.14 1.52
R 0.038 0.048 0.97 1.22
Dimensions — TO-220AB (L Package) — Isolated Mounting Tab
Dimension Inches Millimeters
Min Max Min Max
A 0.380 0.420 9.65 10.67
B 0.105 0.115 2.66 2.92
C 0.230 0.250 5.85 6.35
D 0.590 0.620 14.98 15.75
E 0.142 0.147 3.61 3.73
F 0.110 0.130 2.80 3.30
G 0.540 0.575 13.71 14.60
H 0.025 0.035 0.63 0.89
J 0.195 0.205 4.95 5.21
K 0.095 0.105 2.41 2.67
L 0.060 0.075 1.52 1.91
M 0.085 0.095 1.78 2.16
N 0.018 0.024 0.45 0.61
O 0.178 0.188 4.52 4.78
P 0.045 0.060 1.14 1.53
R 0.038 0.048 0.97 1.22
K
J
A
H
G
B
F
ØE
C
D
L
R
T
C
MEASURING POINT AREA (REF.) 0.17 IN
2
MT2
O
P
N
M
MT1 GATE
.320
8.13
.526
13.36
.276
7.01
K
J
A
H
G
B
F
ØE
C
D
L
R
T
C
MEASURING POINT
MT2
MT2
O
P
N
M
MT1
.276
7.01
.526
13.36
.320
8.13
GATE
AREA (REF.) 0.17 IN
2
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
124
Revised: May 10, 2010 09:33 PM
©2010 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
25 Amp Standard & Alternistor (High Commutation) Triacs
Qxx25xx & Qxx25xHx Series
Dimensions — TO-263 (N Package) — D2Pak Surface Mount
Dimensions — TO-218AC (K Package) — Isolated Mounting Tab
Dimension Inches Millimeters
Min Max Min Max
A 0.810 0.835 20.57 21.21
B 0.610 0.630 15.49 16.00
C 0.178 0.188 4.52 4.78
D 0.055 0.070 1.40 1.78
E 0.487 0.497 12.37 12.62
F 0.635 0.655 16.13 16.64
G 0.022 0.029 0.56 0.74
H 0.075 0.095 1.91 2.41
J 0.575 0.625 14.61 15.88
K 0.211 0.219 5.36 5.56
L 0.422 0.437 10.72 11.10
M 0.058 0.068 1.47 1.73
N 0.045 0.055 1.14 1.40
P 0.095 0.115 2.41 2.92
Q 0.008 0.016 0.20 0.41
R 0.008 0.016 0.20 0.41
U 0.164 0.165 4.10 4.20
W 0.085 0.095 2.17 2.42
G
B
A
W
F
D
V
S
MT1
MT2
T
C
MEASURING POINT
C
E
K
H
J
U
.320
8.13
.276
7. 0 1 .331
8.41
GATE
.460
11.68
.665
16.89
.260
6.60
.150
3.81
.080
2.03
.085
2.16
.055
1.40
.350
8.89
.276
7. 0 1
.276
7. 0 1
AREA: 0.11 IN
2
Dimension Inches Millimeters
Min Max Min Max
A 0.360 0.370 9.14 9.40
B 0.380 0.420 9.65 10.67
C 0.178 0.188 4.52 4.78
D 0.025 0.035 0.64 0.89
E 0.045 0.060 1.14 1.52
F 0.060 0.075 1.52 1.91
G 0.095 0.105 2.41 2.67
H 0.092 0.102 2.34 2.59
J 0.018 0.024 0.46 0.61
K 0.090 0.110 2.29 2.79
S 0.590 0.625 14.99 15.88
V 0.035 0.045 0.89 1.14
U 0.002 0.010 0.05 0.25
W 0.040 0.070 1.02 1.78
C
D
H
G
F
B
A
E
TC Measurement Point
U (diameter)
P
Gate
J
MT2
MT1
M
N
K
L
R
Q
W
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
125
©2010 Littelfuse, Inc
Revised: May 10, 2010 09:33 PM
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
Qxx25xx & Qxx25xHx Series
25 Amp Standard & Alternistor (High Commutation) Triacs
25 A TRIACs
Dimensions — TO-218X (J Package) — Isolated Mounting Tab
Dimensions — TO-3 (P Package) Fastpak — Isolated Mounting Tab
G
R
YH
D
C
K
B
A
EF
N
T
MP
J
L
S
V
U (diameter)
WX
MT1
MT2
Tc
Measurement
Point
Gate
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
Z
MT2
Gate
MT1
G
5 - N
J (MT1, MT2)
FH
E
C
B
A
D
Q
O
R
S
P
U
T
I
ML
TC MeasuringPoint
Thickness off all three copper-alloy terminals is .032" (0.81 mm).
WV
K (Gate)
Dimension Inches Millimeters
Min Max Min Max
A 0.810 0.835 20.57 21.21
B 0.610 0.630 15.49 16.00
C 0.178 0.188 4.52 4.78
D 0.055 0.070 1.40 1.78
E 0.487 0.497 12.37 12.62
F 0.635 0.655 16.13 16.64
G 0.022 0.029 0.56 0.74
H 0.075 0.095 1.91 2.41
J 0.575 0.625 14.61 15.88
K 0.256 0.264 6.50 6.71
L 0.220 0.228 5.58 5.79
M 0.080 0.088 2.03 2.24
N 0.169 0.177 4.29 4.49
P 0.034 0.042 0.86 1.07
R 0.113 0.121 2.87 3.07
S 0.086 0.096 2.18 2.44
T 0.156 0.166 3.96 4.22
U 0.164 0.165 0.410 0.420
V 0.603 0.618 15.31 15.70
W 0.000 0.005 0.00 0.13
X 0.003 0.012 0.07 0.30
Y 0.028 0.032 0.71 0.81
Z 0.085 0.095 2.17 2.42
Dimension Inches Millimeters
Min Max Min Max
A 1.531 1.543 38.90 39.20
B 1.177 1.185 29.90 30.10
C 0.843 0.850 21.40 21.60
D 0.780 0.795 19.80 20.20
E 0.783 0.791 19.90 20.10
F 0.874 0.906 22.20 23.00
G 0.161 0.169 4.10 4.30
H 0.386 0.465 9.80 11.80
I 0.508 0.587 12.90 14.90
J 0.079 0.087 2.00 2.20
K 0.047 0.055 1.20 1.40
L 0.307 0.319 7.80 8.10
M 0.372 0.396 9.45 10.05
N 0.043 0.059 1.10 1.50
O 0.315 0.331 8.00 8.40
P 0.098 0.106 2.50 2.70
Q 0.846 0.886 21.50 22.50
R 0.244 0.256 6.20 6.50
S 0.106 0.130 2.70 3.30
T (MT1) 0.321 0.329 8.15 8.35
T (MT2) 0.321 0.329 8.15 8.35
T (Gate) 0.220 0.228 5.60 5.80
U (MT1) 0.246 0.254 6.25 6.45
U (MT2) 0.246 0.254 6.25 6.45
U (Gate) 0.183 0.191 4.65 4.85
V 0.120 0.130 3.05 3.30
W 0.175 0.185 4.45 4.70
Maximum torque to be applied to mounting tab is 8 in-lbs (0.904Nm).
126
Revised: May 10, 2010 09:33 PM
©2010 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
25 Amp Standard & Alternistor (High Commutation) Triacs
Qxx25xx & Qxx25xHx Series
Product Selector
Packing Options
Part Number Voltage Gate Sensitivity Quadrants Package
400V 600V 800V 1000V I - II - III IV
Qxx25R5 XXXX 50 mA120 mA (TYP) TO-220R
Qxx25N5 XXXX 50 mA120 mA (TYP) TO-263 D2-Pak
Qxx25P5 X X 50 mA 120 mA (TYP) Fastpak
Qxx25RH5 X X X 50 mA TO-220R
Qxx25LH5 X X X 50 mA TO-220L
Qxx25NH5 X X X 50 mA TO-263 D2-Pak
Qxx25R6 XXXX 80 mA TO-220R
Qxx25L6 XXXX 80 mA TO-220L
Qxx25NH6 XXXX 80 mA TO-263 D2-Pak
Qxx25J6 X X X 80 mA TO-218X
Qxx25K6 XXXX 80 mA TO-218AC
Part Number Marking Weight Packing Mode Base Quantity
Qxx25R5 Qxx25R5 2.20g Bulk 500
Qxx25R5TP Qxx25R5 2.20g Tube 500 (50 per tube)
Qxx25N5TP Qxx25N5 1.60g Tube 500 (50 per tube)
Qxx25N5RP Qxx25N5 1.60g Embossed Carrier 500
Qxx25RH5 Qxx25RH5 2.20g Bulk 500
Qxx25RH5TP Qxx25RH5 2.20g Tube 500 (50 per tube)
Qxx25LH5 Qxx25LH5 2.20g Bulk 500
Qxx25LH5TP Qxx25LH5 2.20g Tube 500 (50 per tube)
Qxx25NH5TP Qxx25NH5 1.60g Tube 500 (50 per tube)
Qxx25NH5RP Qxx25NH5 1.60g Embossed Carrier 500
Qxx25P5 Qxx25P5 21.4g Bulk 200
Qxx25R6 Qxx25R6 2.20g Bulk 500
Qxx25R6TP Qxx25R6 2.20g Tube 500 (50 per tube)
Qxx25L6 Qxx25L6 2.20g Bulk 500
Qxx25L6TP Qxx25L6 2.20g Tube 500 (50 per tube)
Qxx25NH6TP Qxx25NH6 1.60g Tube 500 (50 per tube)
Qxx25NH6RP Qxx25NH6 1.60g Embossed Carrier 500
Qxx25J6TP Qxx25J6 5.23g Tube 250 (25 per tube)
Qxx25K6TP Qxx25K6 4.40g Tube 250 (25 per tube)
127
©2010 Littelfuse, Inc
Revised: May 10, 2010 09:33 PM
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
Qxx25xx & Qxx25xHx Series
25 Amp Standard & Alternistor (High Commutation) Triacs
25 A TRIACs
Gate
MT1 / Cathode
MT2 / Anode
0.512 (13.0) Arbor
Hole Dia.
0.945
(24.0)
0.63
(16.0)
1.01
(25.7)
12.99
(330.0)
0.827
(21.0)
0.157
(4.0)
Direction of Feed
Dimensions
are in inches
(and millimeters).
*
*Cover tape
0.059DIA
(1.5)
TO-263 Embossed Carrier Reel Pack (RP) Specifications
Meets all EIA-481-2 Standards
Part Numbering System Part Marking System
Q 60 25NH6
DEVICE TYPE
Q: Triac or Alternistor
VOLTAGE RATING
40: 400V
60: 600V
80: 800V
K0: 1000V
CURRENT RATING
25: 25A
PACKAGE TYPE
L : TO-220AB Isolated
R : TO-220AB Non-Isolated
N : TO-263 (D2 -Pak)
K : TO-218AC Isolated
J : TO-218X Isolated
P : Fastpak
SENSITIVITY
Standard Triac
5: 50mA
Alternistor
H5: 50mA
6: 80mA
H6: 80mA
TO-218AC (K Package)
TO-218X (J Package)
yxxxx
Q6025L5
TO-220AB (R & L Packages)
TO-263 (N Package)
Fastpak (P Package)
Q6025K6
yxxxx
yxxxx
Q6025P5
®
®
®
