EMI303-10 - EATON POWERWARE

Product Brochure

Eaton ePDU G3

Basic and Metered Input

2EATON Eaton ePDU G3

Eaton’s third-generation technology for

power distribution

The new Eaton® ePDU® G3 platform provides best-in-class power distribution, enabling data center and information technology (IT)

managers to effectively monitor and manage their rack environments. Featuring Eaton’s third-generation (G3) ePDU technology,

ePDU G3 is easy to install and reduces operating costs while increasing reliability. With a host of unique and state-of-the-art features

for both Basic and Metered Input ePDUs, ePDU G3 sets the standard for power management in a wide range of key applications.

Key applications

Designed for IT environments, ePDU G3 is available in a variety

of plug and outlet configurations, including both 120 and 200-

240 volt configurations. Power distribution is needed in racks to

properly connect servers, switches and other IT equipment.

Small / medium business

• 120V and lower kVA options

• Economical Basic or Metered Input

• Local pixel LCD display for onsite management

Enterprise data centers

• 208V three phase up to 17 kW for high density

• Network monitoring of power usage and capacity

• Variety of outlet configurations

Outlet grip plug retention

Eaton’s new patented IEC outlet grip secures plugs in place

with a lever actuated grip that’s integrated into each outlet.

Once the levers click into the grip position, the plugs are secured

from accidental disconnect due to bumps or vibrations. Unlike

competitor solutions, the new outlet grip eliminates the need

for special power cords that can increase purchase prices by

$200 to $300.

O is unlocked,

+ is grip engaged

Billing grade accuracy

ePDU G3 provides one percent revenue-grade

power monitoring for higher accuracy in department

billing or collocation data centers. You are able to

effectively measure power usage to all outlets

and identify open capacity, resulting in full-power utilization.

Utility rebate programs also require measurements that meet

revenue-grade standards.

ePDU G3 key technology features Basic (BA) Metered Input (MI)

IEC outlet grip plug retention • •

±1% billing grade accuracy •

Color-coded outlet sections • •

Advanced LCD pixel display •

Hot-swap meter •

Low-profile form factor • •

High operating temperature • •

Daisy chain of IP addresses •

Ease of installation • •

Hot-swap eNMC module

Eaton’s new hot-swap eNMC (ePDU Network Management

and Control) module can be replaced without the need to

power down your rack. As a result, you not only increase

uptime, but also enhance serviceability and potentially save

$200 to $500 on an unnecessary service call.

Advanced LCD pixel display

The new ePDU G3 LCD pixel display simplifies local setup and

trouble shooting. It also allows you to view voltage, power,

total input, meters, LCD orientation and alarm history. In

addition, the menu-driven display changes from blue to amber

during an alarm situation, visually alerting you of a problem.

EATON Eaton ePDU G3

Color-coded outlet sections

Each color-coded outlet section matches a corresponding

circuit breaker in the new ePDU G3 models. This coding

allows you to easily identify which circuit breaker feeds

which outlets, and prevents unbalanced loading that could

trip a breaker.

Hot-swap meter is

able to be replaced

without powering

down the rack

ePDU G3’s advanced LCD pixel display

Local buttons allow for easy menu

navigation and simplify setup

Low-profile form factor

The width of the new ePDU

G3 Basic and Metered Input

ePDUs has been optimized

for side mounting, resulting

in zero interference into

the rail space so you don’t

block hot-swap fans or

power supplies. Some

models feature low-profile

circuit breakers to reduce

interference when the ePDU

is mounted with outlets

facing the rail (center of

the rack).

ePDU G3 in Eaton S-Series rack ePDU G3 does not interfere

with rail space

ePDU G3 mounted at 90-degree angle

EATON Eaton ePDU G3

High operating

temperature

All ePDU G3 models are fully

functional in high operating

temperature environments

up to 140°F (60°C), resulting

in reduced cooling costs. A

higher operating temperature

is needed for most modern

hot-air containment solutions.

Since ePDUs are located in

the back of the rack where

server exhaust can elevate

temperatures to as high

as 116°F, based on ASHRAE’s

80.6°F maximum inlet

temperature guidelines,

it’s important to have the

right solution.

Modern hot-air containment solution with ePDUs located in the hot air exhaust section

Daisy chain four units from one IP address

Eaton’s new patented daisy chain is available on all network-connected ePDU G3 models. This feature allows four ePDUs to share

the same network connection and IP address, resulting in a 75 percent reduction in network infrastructure costs, compared to

competitor rack PDUs that require a dedicated IP address.

Demonstrated cost difference based on two ePDUs per rack:

Ease of installation

• Patented clip feet allow for

various mounting methods

• Mounting buttons come

pre-installed to reduce

installation time

• Double-sided aluminum

buttons accommodate

different variations of metal

thickness

• Optional side mounting

button locations to mount

ePDU G3s at a 90-degree

rotation in the rack,

preventing interference

with hot-swap fans and

power supplies

Eaton patented clip feet Clip feet easily attach to ePDUs Mounting buttons come

pre-installed on each ePDU G3

100 racks 200 racks 400 racks

Dedicated IP address $40,000 $80,000 $160,000

Daisy chain method $10,000 $20,000 $40,000

Cost savings $30,000 $60,000 $120,000

EATON Eaton ePDU G3

eaton.com/ePDUG3

Light-weight aluminum chassis

• Offers a 30 percent lighter-than-steel chassis, making each unit easier to install

• Lower shipping costs compared to competitive models made from steel

• Dissipates heat for better performance in high-density environments

• Offers better electrical conductivity for improved electrical grounding

Network management

The advanced network capabilities of the ePDU G3 platform

allow you to monitor multiple ePDUs through Eaton’s power

monitoring solutions. In addition, ePDU G3 has built-in support

for third-party data center infrastructure management (DCIM)

solutions by using SNMP v3 to communicate securely to

each ePDU.

Environmental monitoring

The optional environmental monitoring probe connects to the

serial port and enables you to collect temperature and humidity

readings in the rack environment to monitor environmental

data remotely. You can also monitor the status of two contact

closure devices, such as door switches.

Light-weight aluminum

chassis can be easily held

with one hand.

Part Number EMP001

Software

Number of

racks supported Software type Application Cost

Web browser / email alerts 1-25 Embedded Web server Data closet or small network Included

Eaton Intelligent Power

Manager 1-200 Server based / Web interface Small-to-medium enterprise Free up to 10 nodes

Third-party DCIM 50-1,000 Varies / SNMP data to third party Medium-to-large enterprise Varies

Eaton Foreseer 100-1,000 Server based / Web interface Facility or large enterprise Varies by size

Eaton, Intelligent Power and ePDU are

registered trademarks of Eaton.

All other trademarks are property

of their respective owners.

Eaton

Electrical Sector

1000 Eaton Boulevard

Cleveland, OH 44122 USA

Eaton.com

Printed in USA

BR155001EN

January 2014

For more information

about the new ePDU

G3 platform, visit

Eaton.com/ePDUG3

Catalog Number Function Plug Breaker Max kW Cord

(ft) Output receptacles Dimensions

(H x W x D, in)

EBA301-10 BA L15-20P (3) 20A 5.76 10 (30) C13, (6) C19 66.5 x 2.05 x 2.1

EBA311-10 BA L15-20P (3) 20A 5.76 10 (42) C13 69.5 x 2.05 x 2.1

EBA308-10 BA L21-20P None 5.76 10 (21) 5-20R, (6) L6-20R 66.5 x 2.05 x 2.1

EBA309-10 BA L21-20P None 5.76 10 (39) 5-20R 66.5 x 2.05 x 2.1

EBA302-10 BA L21-20P (3) 20A 5.76 10 (30) C13, (6) C19 66.5 x 2.05 x 2.1

EBA312-10 BA L21-20P (3) 20A 5.76 10 (42) C13 69.5 x 2.05 x 2.1

EBA303-10 BA L15-30P (3) 20A 8.64 10 (30) C13, (6) C19 66.5 x 2.05 x 2.1

EBA313-10 BA L15-30P (3) 20A 8.64 10 (42) C13 69.5 x 2.05 x 2.1

EBA310-10 BA L21-30P (3) 20A 8.64 10 (30) C13, (6) C19, (1) 5-20R 66.5 x 2.05 x 2.1

EBA304-10 BA L21-30P (3) 20A 8.64 10 (30) C13, (6) C19 66.5 x 2.05 x 2.1

EBA314-10 BA L21-30P (3) 20A 8.64 10 (42) C13 69.5 x 2.05 x 2.1

EBA305-06 BA CS8365 (3) 20A 12.48 6 (30) C13, (6) C19 66.5 x 2.05 x 2.1

EBA315-10 BA CS8365 (3) 20A 12.48 10 (42) C13 69.5 x 2.05 x 2.1

EBA300-06 BA CS8365 (2) 20A, (1) 30A 14.4 6 (24) C13, (4) C19, (2) L6-30P 66.5 x 2.05 x 2.1

EBA306-06 BA CS8365 (6) 20A 14.4 6 (21) C13, (12) C19 66.5 x 2.05 x 2.1

EBA307-06 BA IEC60309 460P9 (6) 20A 17.3 6 (21) C13, (12) C19 66.5 x 2.05 x 2.1

EMI100-10 MI 5-15P None 1.44 10 (24) 5-15R 66.5 x 2.05 x 2.1

EMI101-10 MI L5-20P (5-20P adapter) None 1.92 10 (24) 5-20R 66.5 x 2.05 x 2.1

EMI102-10 MI L5-30P (2) 20A 2.88 10 (30) 5-20R 66.5 x 2.05 x 2.1

EMI103-10 MI C20 (L6-20 adapter) None 3.84 10 (18) C13, (2) C19 35.5 x 2.05 x 2.1

EMI301-10 MI L15-20P (3) 20A 5.76 10 (30) C13, (6) C19 66.5 x 2.05 x 2.1

EMI311-10 MI L15-20P (3) 20A 5.76 10 (42) C13 69.5 x 2.05 x 2.1

EMI308-10 MI L21-20P None 5.76 10 (21) 5-20R, (6) L6-20R 66.5 x 2.05 x 2.1

EMI309-10 MI L21-20P None 5.76 10 (39) 5-20R 66.5 x 2.05 x 2.1

EMI318-10 MI L21-20P None 5.76 10 (30) C13, (6) C19, (3) 5-20R 66.5 x 2.05 x 2.1

EMI302-10 MI L21-20P (3) 20A 5.76 10 (30) C13, (6) C19 66.5 x 2.05 x 2.1

EMI312-10 MI L21-20P (3) 20A 5.76 10 (42) C13 69.5 x 2.05 x 2.1

EMI104-10 MI L6-30P (2) 20A 5.76 10 (36) C13, (6) C19 66.5 x 2.05 x 2.1

EMI303-10 MI L15-30P (3) 20A 8.64 10 (30) C13, (6) C19 66.5 x 2.05 x 2.1

EMI313-10 MI L15-30P (3) 20A 8.64 10 (42) C13 69.5 x 2.05 x 2.1

EMI310-10 MI L21-30P (3) 20A 8.64 10 (30) C13, (6) C19, (1) 5-20R 66.5 x 2.05 x 2.1

EMI304-10 MI L21-30P (3) 20A 8.64 10 (30) C13, (6) C19 66.5 x 2.05 x 2.1

EMI314-10 MI L21-30P (3) 20A 8.64 10 (42) C13 69.5 x 2.05 x 2.1

EMI305-06 MI CS8365 (3) 20A 12.48 6 (30) C13, (6) C19 66.5 x 2.05 x 2.1

EMI315-10 MI CS8365 (3) 20A 12.48 10 (42) C13 69.5 x 2.05 x 2.1

EMI300-06 MI CS8365 (2) 20A, (1) 30A 14.4 6 (24) C13, (4) C19, (2) L6-30R 66.5 x 2.05 x 2.1

EMI316-06 MI CS8365 (6) 20A 14.4 6 (9) C13, (12) C19 66.5 x 2.05 x 2.1

EMI317-06 MI IEC60309 460P9 (6) 20A 17.3 6 (9) C13, (12) C19 66.5 x 2.05 x 2.1

ePDU G3 Basic models selection guideePDU G3 Metered Input models selection guide

ePDU G3 platform model selection guide