Follow Us
Product Arduino MBED About
WizFi250 Home WizFi250
WizFi250
WizFi250 is a small size WiFi module featuring 802.11b/g and 802.11n. It includes a 2.4
GHz WLAN CMOS power amplifier (PA) that meets the output power requirements of
most handheld systems.
Along with the integrated power amplifier, the WizFi250 also includes integrated transmit
and receive antenna further reducing the overall solution cost.
The small size and low profile physical design eases enabling high performance wireless
connectivity without space constraint in system designs.
Hardware WAPI acceleration engine, AES, TKIP, WPA and WPA2 are supported to
provide your network with the latest security requirements.
Overview
Features
Single band 2.4GHz IEEE802.11b/g/n Wi-Fi module
Integrated RF power amplifier : Antenna calibration is not required
1MB flash memory, 128KB SRAM, 1MB serial flash
Low power consumption & excellent power management to extend battery life
The highest compatibility with the most of APs
Compact size, suitable for mobile or hand-held devices
Host Interface : UART , SPI
Support powerful web configuration
Soft AP (Enough memory retention, L2 switching)
OTA (Over the Air F/W Upgrading)
Wi-Fi Direct
WIZwiki
WIZwiki
WIZnet Forum
WIZnet Forum
WIZnet e-shop (US)
WIZnet e-shop (US)
WIZnet e-shop (KR)
WIZnet e-shop (KR)
WIZnet e-shop (EU)
WIZnet e-shop (EU)
WIZnet e-shop Hong Kong
WIZnet e-shop Hong Kong
Evaluation Board
WizFi250-EVB
Wiki Docs
Technical Support
Buy Now
WizFi250 Block Diagram
WizFi Module (Embedded WiFi
Module)
>WizFi310
>WizFi250
>WizFi210
>WizFi220
>WizFi630A