SPEC NO: DSAC1798 REV NO: V.7A DATE: MAR/07/2013 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1312000001
13.8mm (0.543INCH) 14 SEGMENT DUAL
DIGIT ALPHANUMERIC DISPLAY
Part Number: PDA54-11CGKWA Green
Features
z0.54 inch character height.
zLow current operation.
zHigh contrast and light output.
zEasy mounting on P.C. boards or sockets.
zCategorized for luminous intensity.
zMechanically rugged.
zStandard : gray face, white segment.
zRoHS compliant.
Description
The Green source color devices are made with AlGaInP on
GaAs substrate Light Emitting Diode.
Package Dimensions& Intern al Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAC1798 REV NO: V.7A DATE: MAR/07/2013 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1312000001
Selection Guide
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25° C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Part No. Dice Lens Type
Iv (ucd) [1]
@ 10mA Description
Min. Typ.
PDA54-11CGKWA Green (AlGaInP) White Diffused
9000 22000
*3600 *8000
Common Anode, Rt.
Hand Decimal.
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Green 574 nm IF=20mA
λD [1] Dominant Wavelength Green 570 nm IF=20mA
Δλ1/2 Spectral Line Half-width Green 20 nm IF=20mA
C Capacitance Green 15 pF VF=0V;f=1MHz
VF [2] Forward Voltage Green 2.1 2.5 V IF=20mA
IR Reverse Current Green 10 uA VR=5V
Parameter Green Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature[2] 260°C For 3-5 Seconds
SPEC NO: DSAC1798 REV NO: V.7A DATE: MAR/07/2013 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1312000001
Green PDA54-11CGKWA
SPEC NO: DSAC1798 REV NO: V.7A DATE: MAR/07/2013 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1312000001
PACKING & LABEL SPECIFICATIONS PDA54-11CGKWA
SPEC NO: DSAC1798 REV NO: V.7A DATE: MAR/07/2013 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1312000001
SPEC NO: DSAC1798 REV NO: V.7A DATE: MAR/07/2013 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1312000001
Detailed application notes are listed on our website.
http://www.kingbright.com/application_notes
