PC BOARD MOUNTING CONNECTORS 750 SERIES FEATURES * The 750 series connector is slim -- only 7 mm (0.275 in.) high and wide -- and takes up very little space. * Pins are arranged in a 2.54 mm (0.100 in.) grid. The 750 series connector can be changed from a twopiece type connector to a one-piece dip soldering connection without changing the PC board pattern, because the mounting hole layout is the same as the 700 series. * The series offers 10 to 64 contacts to match 700 series connectors. SPECIFICATIONS Item Specification Operating temperature range -55C to +105C Current rating DC 1 A Voltage rating AC 250 V Insulation resistance 1000 M min. (DC 500 V) Dielectric strength AC 500 V for 1 minute Applicable wire Flat cable: 1.27 mm (0.050 in.) pitch AWG #28 (stranded) or AWG #30 (solid) Applicable PC board (standard) 1.6 mm MATERIALS Item Materials Insulating material Polyester (UL94V-0) Conductor Copper alloy Plating Tin (SN) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 1 750 Series DIMENSIONS [With cable] [Cover] A Connection A Note : The blue wire of the cable (wire No. 1) is connected to the pin (contact) under the mark. 7(0.276) 7(0.276) 3(0.118) 7(0.276) 7(0.276) Wire No. 1 [Main body] C 2.54(0.10) Pin No. 1 0.3 x 0.5(0.012 x 0.020) 2.54(0.10) 7(0.276) C 3.4 6.1(0.240) (0.134) B 4(0.157) A Unit: mm (in.) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 2 750 Series MOUNTING HOLE LAYOUT 9.5 (min.) (0.374) 2.54(0.10) C 0.2(0.008) 0.8(0.031) 0.06(0.002) 2.54(0.10) Unit: mm (in.) PART NUMBERS AND DIMENSIONS Number of contacts 10 14 16 20 24 26 30 34 40 50 60 64 Part number FCN-754P010-SN/0 FCN-754P014-SN/0 FCN-754P016-SN/0 FCN-754P020-SN/0 FCN-754P024-SN/0 FCN-754P026-SN/0 FCN-754P030-SN/0 FCN-754P034-SN/0 FCN-754P040-SN/0 FCN-754P050-SN/0 FCN-754P060-SN/0 FCN-754P064-SN/0 A 19.2 (0.756) 24.3 (0.957) 26.8 (1.055) 31.9 (1.256) 37.0 (1.457) 39.5 (1.555) 44.6 (1.756) 49.7 (1.957) 57.3 (2.256) 70.0 (2.756) 82.7 (3.256) 87.8 (3.457) Dimensions: mm (in.) B 11.43 (0.450) 16.51 (0.650) 19.05 (0.750) 24.13 (0.950) 29.21 (1.150) 31.75 (1.250) 36.83 (1.450) 41.91 (1.650) 49.53 (1.950) 62.23 (2.450) 74.93 (2.950) 80.01 (3.150) C 10.16 (0.400) 15.24 (0.600) 17.78 (0.700) 22.86 (0.900) 27.94 (1.100) 30.48 (1.200) 35.56 (1.400) 40.64 (1.600) 48.26 (1.900) 60.96 (2.400) 73.66 (2.900) 78.74 Notes: * The last digit (0) of the part number is zero. Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 3 750 Series IDC TOOLS FEATURES * Special IDC tools are used to assemble FCN-750 series connectors and flat cables. * All tools are simple and easy to use, even for firsttime users. * Users who have IDC tools manufactured by us do not have to buy hand presses or cutting cables. They are compatible. Take care to buy the locator plate designed for your connectors. * The number of pins can be changed easily by setting the connector guide to a specified pin hole. * The cable cutter remains sharp, providing fast, easy cutting with a long life. Notes: * Please ask for an operation instruction manual if needed. * If you have any questions about Fujitsu IDC tools, please contact your local Fujitsu office or your local Fujitsu distributor. Hand press Cable cutter Locator plate (790 series) CABLE TERMINATION * Flat cable termination diagram There are many ways to connect connectors to flat cables. Choose the connection method appropriate to your application from the figure below. * Cable length The length of a cable is indicated in units of cm, as shown in the figure below. The minimum length is 3 cm. The specified tolerance of the cable length is 10% for L 10 cm (5 mm min.), 1 cm for 10 cm < L < 100 cm, (L/100 cm + 2 cm) for 100 cm L 1800 cm, and 20 cm for 1800 cm < L. Type number No. 1 Connector model No. 2 Wire No. 1 m Lc No. 3 No. 4 Wire No. 1 750 series Wire No. 1 Wire No. 1 Wire No. 1 Wire No. 1 PART NUMBERS FOR IDC TOOLS Name Part number Cable cutter (common) FCN-707T-T001/H Hand press (common) FCN-707T-T101/H Locator plate (for 750 series connectors) FCN-757T-T015/H The hand press and the cable cutter can be used for other IDC connectors. Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 4 750 Series Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info.marketing@fceu.fujitsu.com Web: www.fceu.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com (c) 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 09/2001 Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 5