APTDF60H601G Fast Diode Full Bridge Power Module 3 4 Application CR1 1 * * * * 2 Features CR3 5 6 CR2 7 VRRM = 600V IC = 60A @ Tc = 90C CR4 8 Uninterruptible Power Supply (UPS) Induction heating Welding equipment High speed rectifiers * * * * * * * 9 10 Ultra fast recovery times Soft recovery characteristics High blocking voltage High current Low leakage current Very low stray inductance High level of integration Benefits * * * * * * * Outstanding performance at high frequency operation Low losses Low noise switching Solderable terminals for easy PCB mounting Direct mounting to heatsink (isolated package) Low junction to case thermal resistance RoHS Compliant All multiple inputs and outputs must be shorted together 3/4 ; 5/6 ; 7/8 ; 1/2 ; 9/10 Parameter Maximum DC reverse Voltage Maximum Peak Repetitive Reverse Voltage IF(AV) Maximum Average Forward Current IFSM Non-Repetitive Forward Surge Current Duty cycle = 50% 8.3ms Max ratings Unit 600 V TC = 25C 92 TC = 90C TJ = 45C 60 A 500 These Devices are sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. See application note APT0502 on www.microsemi.com www.microsemi.com 1-4 APTDF60H601G - Rev 0 Symbol VR VRRM August, 2007 Absolute maximum ratings APTDF60H601G All ratings @ Tj = 25C unless otherwise specified Electrical Characteristics Symbol Characteristic VF Diode Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance Test Conditions IF = 60A IF = 120A Tj = 125C IF = 60A Tj = 25C VR = 600V Tj = 125C Min Typ 1.7 2 1.4 Max 2.3 V 25 500 VR = 200V Unit 145 A pF Dynamic Characteristics Symbol Characteristic trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM Reverse Recovery Current trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM Reverse Recovery Current Test Conditions IF = 60A VR = 400V di/dt = 200A/s IF = 60A VR = 400V di/dt=1000A/s Min Typ Tj = 25C 70 Tj = 125C 140 Tj = 25C Tj = 125C 100 690 Tj = 25C 4 Tj = 125C 9 Tj = 125C Max Unit ns nC A 80 ns 1540 nC 31 A Thermal and package characteristics Characteristic Junction to Case Thermal Resistance Min RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz 2500 -40 -40 -40 2.5 To heatsink M4 Max 0.85 175 125 100 4.7 80 Unit C/W V C N.m g August, 2007 Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque Package Weight Typ www.microsemi.com 2-4 APTDF60H601G - Rev 0 Symbol RthJC VISOL TJ TSTG TC Torque Wt APTDF60H601G Typical Performance Curve Maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration Thermal Impedance (C/W) 0.9 0.9 0.8 0.7 0.7 0.6 0.5 0.5 0.4 0.3 0.3 0.2 0.1 0.05 0.1 0 0.00001 Single Pulse 0.0001 0.001 0.01 0.1 1 10 Rectangular Pulse Duration (Seconds) Forward Current vs Forward Voltage trr, Reverse Recovery Time (ns) 160 TJ=125C 120 80 TJ=25C 40 0 0.0 0.5 1.0 1.5 2.0 2.5 150 120 A 125 30 A 100 60 A 75 50 3.0 0 200 400 600 800 -diF/dt (A/s) QRR vs. Current Rate Charge TJ=125C VR=400V 1.5 120 A 60 A 30 A 1.0 0.5 0.0 0 200 400 600 800 1000 1200 IRRM, Reverse Recovery Current (A) QRR, Reverse Recovery Charge (C) VF, Anode to Cathode Voltage (V) 2.0 1000 1200 IRRM vs. Current Rate of Charge 40 TJ=125C VR=400V 35 30 120 A 25 60 A 20 15 10 5 30 A 0 0 200 -diF/dt (A/s) 400 600 800 1000 1200 -diF/dt (A/s) Capacitance vs. Reverse Voltage DC Forward Current vs. Case Temp. 100 400 80 300 60 200 40 100 20 0 Duty Cycle = 0.5 TJ=175C August, 2007 500 IF (A) C, Capacitance (pF) TJ=125C VR=400V 0 1 10 100 1000 VR, Reverse Voltage (V) 25 50 75 100 125 150 175 Case Temperature (C) www.microsemi.com 3-4 APTDF60H601G - Rev 0 IF, Forward Current (A) Trr vs. Current Rate of Charge 175 200 APTDF60H601G SP1 Package outline (dimensions in mm) Microsemi reserves the right to change, without notice, the specifications and information contained herein Microsemi's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. U.S and Foreign patents pending. All Rights Reserved. www.microsemi.com 4-4 APTDF60H601G - Rev 0 August, 2007 See application note 1904 - Mounting Instructions for SP1 Power Modules on www.microsemi.com