HBL4729C
2.78"
(70.6)
1.41"
(35.8)
1.53"
(38.9)
HBL4729VY
2.59"
(65.8)
1.50"
(38.1)
HBL25W47
1.75"
(44.5) 4.00"
(101.6)
HBL4715
2.31"
(58.7)
1.36"
(34.5)
1.94"
(49.3)
1.50"
(38.1)
.16"
(4.1)
DIA.
1.75"
(44.5)
HBL4715C
2.56"
(65.0)
1.72"
(43.7)
2.19"
(55.6)
1.69"
(42.9)
.16"
(4.1)
DIA.
2.38"
(60.5) 1.38"
(35.1)
3.28"
(83.3)
1.27"
(32.3)
HBL4710
HBL4700
1.70"
(43.2)
3.28"
(83.3) 2.735"
(69.5)
B-11Dimensions in Inches (mm) www.hubbell-wiring.com
15A 125V
NEMA L5-15R
UL/CSA
GW
15A 250V
NEMA L6-15R
UL/CSA
GX
Y
15A 277V AC
NEMA L7-15R
UL/CSA
GW
Twist-Lock® Devices 15 Ampere, 125, 250 Volts and 277 Volts AC
Twist-Lock® Devices
15 Ampere, 125, 250 Volts and 277 Volts AC
2 Pole, 3 Wire Grounding
Insulgrip® Connector Bodies
and Receptacles
Connector Bodies
Description Cord Dia. Catalog Numbers
Insulgrip connector body, black and .230"-.720" HBL4729C™ HBL4579C HBL4779C
white nylon. Multiple drive screws. (5.8-18.3)
All black nylon. .230"-.720" HBL4729CBK – –
(5.8-18.3)
Insulgrip connector body, 8 position .325"-.655" HBL4729CA – –
angle, black and white nylon. (8.3-16.6)
Multiple drive screws.
Insulgrip connector body, corrosion .230"-.720" HBL47CM29C HBL45CM79C HBL47CM79C
resistant, yellow and white nylon. (5.8-18.3)
Multiple drive screws.
Elastogrip connector body, .300"-.655" HBL2547 – –
yellow elastomer, dust tight. (7.6-16.6)
Elastogrip® connector body, .300"-.655" HBL25W47** – –
yellow elastomer, water/dust tight. (7.6-16.6)
Valise® connector body, .220"-.660" HBL4729VY HBL4579VY HBL4779VY
yellow nylon. (5.6-16.8)
Valise® connector body, .220"-.660" HBL4729VBK HBL4579VBK HBL4779VBK
black nylon. (5.6-16.8)
Accessories on page B-49.
Receptacles, Back and Side Wired
Description Catalog Numbers
Duplex, flush, brown RTP face. HBL4700* HBL4550* HBL4750*
Duplex, flush, ivory RTP face. HBL4700I* – –
Duplex, ring terminal connection. HBL4700RT* HBL4550RT* –
Duplex, isolated ground, flush, orange RTP face. IG4700A* IG4550A* –
Duplex, corrosion resistant, yellow RTP face. HBL47CM00* – –
Single, flush, black nylon face. HBL4710 HBL4560 HBL4760
Same as HBL4760 without mounting screws, – – HBL4760C
ears. Terminal screws backed out.
Single, ring terminal connection. HBL4710RT HBL4560RT –
Single, isolated ground, flush, orange nylon face. IG4710 IG4560
Single, black nylon face mounted on a HBL4711 – HBL4761
4" (101.6) round box cover.
Single, panel mount, black nylon face, side HBL4713 HBL4563 HBL4763
wired only, 1.75" or 1.937" (44.5 or 49.2)
mounting centers.
Accessories on pages B-48 and B-49.
Flanged Receptacles
Description Catalog Numbers
Insulgrip flanged receptacle, nylon casing, HBL4715C HBL4585C HBL4785C
back wired.
Stainless steel casing, brown phenolic. HBL4715 HBL4585 HBL4785
Corrosion resistant, stainless steel casing, HBL47CM15 – –
yellow melamine.
Accessories on pages B-48 and B-49.
Notes: HP ratings are AC only.
RTP is an abbreviation for reinforced thermoplastic polyester.
See section J for full line of isolated ground devices.
*Supplied with break-off tabs for split circuit wiring.
**Watertight connector body IP55 suitability when closure plug
inserted or when installed and used properly with watertight plug.
IP20
SUITABILITY
