Specifications Product Name PIR MOTION SENSOR "PaPIRs" Ver.1.1 Model No. EKMC760111 K Page: 1 1.Product Name PIR MOTION SENSOR "PaPIRs" VZ seriesStandard detection type 170A / Digital output / Low Sensitivity 2.Model Number Lens Color Model Number White EKMC7601111K Black EKMC7601112K Pearl White EKMC7601113K Marking C76011K 3.Dimensions Top VIEW C 76 0 11 K a) b) c) d) e) a) 4th digit of Model No. (Ex:EKMC7601111K) Side VIEW b) 5th & 6th digit of Model No. (Ex:EKMC7601111K) c) Last-digit of the year (Ex:2010=0,2011=1,...) d) Lot No. 1st week of Jan. will be 01, and further No. of 02,03, will continue up to 53. e) 12th digit of Model No. (Ex:EKMC7601111K) Bottom VIEW General Tolerance 0.5mm (0.020inch) Approved by Checked by Issued on Mar. 26thon,2018 Issued Mar. 26h,2018 Designed by (SKC0410-P01,02,140701) Specifications Product Name PIR MOTION SENSOR "PaPIRs" Ver.1.1 EKMC760111 K Model No. Page: 2 4.Characteristics 4-1 Detection Performance Conditions for measuring: Ambient temperature=25(77F) Operating voltage=5VDC (Note1) Detection Range Temperature difference Value 16(28.8F) Max 7m 8(14.4F) Max 5m Conditions concerning the target 1.Movement speed: 1.0m/s 2.Target concept is human body (Object size:Around 700x250mm) Note1:Depending on the temperature difference between the target and the surroundings, detection range will change. Value Horizontal Detection Area Vertical Notes 9447 8241 Refer to the section 4-5. Detection zones 64 4-2 Maximum Rated Values Value Unit Power Supply Voltage -0.37.0 VDC Usable Ambient Temperature -20+60 (-4+140F) Do not use in a freezing or condensation environment Storage Temperature -20+70 (-4+158F) 4-3 Electrical Characteristics Conditions for Measuring: Ambient temperature=25(77F) Symbol Min Avg. Max Unit Special mention Operating Voltage Vdd 3.0 6.0 VDC Electrical Current Consumption Iw 170 300 A Iout=0 Output Current Iout 100 A VoutVdd0.5 Output Voltage Vout Vdd0.5 VDC Twu 30 s Circuit Stability Time (when voltage is applied) Issued on Mar. 26th,2018 (SKC0410-P01,02,140701) Specifications Product Name PIR MOTION SENSOR "PaPIRs" Model No. Ver.1.1 EKMC760111 K Page: 3 4-4 Timing Chart Power Supply Detecting Target Output Voltage ON OFF Present Absent ON OFF Twu Durations Twu:Circuit Stability Time=About 30s. (max.) During this stage, the output's status is undefined (ON/OFF) and detection is therefore not guaranteed. Issued on Mar. 26th,2018 (SKC0410-P01,02,140701) Specifications Product Name PIR MOTION SENSOR "PaPIRs" Model No. Ver.1.1 EKMC760111 K Page: 4 4-5 Detection Area Vertical Tab Horizontal Issued on Mar. 26th,2018 (SKC0410-P01,02,140701) Specifications Product Name PIR MOTION SENSOR "PaPIRs" Ver.1.1 Page: 5 EKMC760111 K Model No. 4-6 Wiring Diagram Sensor Vdd GND Load OUT Iout:Max.100A In this direction, no detection problem 4-7 Mounting Directions 1) Direction As detailed on the diagram, please install the sensor so that the expected trespassing direction corresponds to the axis X or axis Y. In some cases, going back and forth towards the sensor (parallel movement to the axis Z), may not be detected. 2) Detection Area As shown on the diagram, the detection zone is polarized. If a target enters the detection zones + and - at the same time, the signals are respectively cancelled and detection could become impossible at maximum detection range. (Please refer to the detection area diagram in 4-5 for details) Issued on Y X Z In this direction, detection is uncertain. Target Mar. 26th,2018 (SKC0410-P01,02,140701) Specifications Product Name PIR MOTION SENSOR "PaPIRs" Model No. Ver.1.1 EKMC760111 K Page: 6 5. Safety Precautions Head the following precautions to prevent injury or accidents. 1) Do not use these sensors under any circumstance in which the range of their ratings, environment conditions or other specifications are exceeded. Using the sensors in any way which causes their specifications to be exceeded may generate abnormally high levels of heat, emit smoke, etc., resulting in damage to the circuitry and possibly causing an accident. 2) Our company is committed to making products of the highest quality and reliability. Nevertheless, all electrical components are subject to natural deterioration, and durability of a product will depend on the operating environment and conditions of use. Continued use after such deterioration could lead to overheating, smoke or fire. Always use the product in conjunction with proper fire-prevention, safety and maintenance measures to avoid accidents, reduction in product life expectancy or break-down. 3) Before connecting, check the pin layout by referring to the connector wiring diagram, specifications diagram, etc., to verify that the connector is connected properly. Mistakes made in connection may cause unforeseen problems in operation, generate abnormally high levels of heat, emit smoke, etc., resulting in damage to the circuitry. 4) Do not use any motion sensor which has been disassembled or remodeled. 5) Failure modes of sensors include short-circuiting, open-circuiting and temperature rises. If this sensor is to be used in equipment where safety is a prime consideration, examine the possible effects of these failures on the equipment concerned, and ensure safety by providing protection circuits or protection devices. Example : Safety equipments and devices Traffic signals Burglar and disaster prevention Issued on Mar. 26th,2018 (SKC0410-P01,02,140701) Specifications Product Name PIR MOTION SENSOR "PaPIRs" Model No. Ver.1.1 EKMC760111 K Page: 7 6.Operating Precautions 6-1 Basic Principles PaPIRs is a pyroelectric infrared sensor that detects variations in infrared rays. However, it may not detect in the following cases: lack of movement, no temperature change in the heat source. Besides, it could also detect the presence of heat sources other than a human body. Efficiency and reliability of the system may vary depending on actual operating conditions: 1) Detecting heat sources other than the human body, such as: a) small animals entering the detection area b) When a heat source for example sun light, incandescent lamp, car headlights etc, or strong light beam hit the sensor regardless inside or outside the detection area. c) Sudden temperature change inside or around the detection area caused by hot or cold wind from HVAC, or vapor from the humidifier, etc. 2) Difficulty in sensing the heat source a) Glass, acrylic or similar materials standing between the target and the sensor may not allow a correct transmission of infrared rays, b) Non-movement or quick movements of the heat source inside the detection area. (Please refer to 4-1 for details about movement speed.) 3) Expansion of the detection area In case of considerable difference in the ambient temperature and the human body temperature, detection area may be wider apart from the configured detection area. 4 Malfunction / Detection error Unnecessary detection signal might be outputted, on rare occasions, come from sudden outbreak output due to the nature of pyro-electric element. When the application does not accept such condition strictly, please implement the countermeasure by introducing pulse count circuit etc. 6-2 Optimal Operating Environment Conditions 1) 2) 3) 4) 5) Temperature Please refer to the maximum rated values of 4-2. Humidity Degree 1585% Rh (Avoid condensation or freezing of this product Pressure 86106kPa Overheating, oscillations, shocks can cause the sensor to malfunction. This sensor is not waterproof or dustproof. Avoid use in environments subject to excessive moisture, condensation, frost, containing salt air or dust. 6) Avoid use in environments with corrosive gases. Issued on Mar. 26th,2018 (SKC0410-P01,02,140701) Specifications Product Name PIR MOTION SENSOR "PaPIRs" Model No. Ver.1.1 EKMC760111 K Page: 8 6-3 Handling Cautions 1) Do not solder with a soldering iron above 350662F, or for more than 3 seconds. This sensor should be hand soldered. 2) To maintain stability of the product, always mount on a printed circuit board. 3) Do not use liquids to wash the sensor. If washing fluid gets through the lens, it can reduce performance. 4) Do not use a sensor after it fell on the ground. 5) The sensor may be damaged by 200 volts of static electricity. Avoid direct hand contact with the pins and be very careful when operating the product. 6) When wiring the product, always use shielded cables and minimize the wiring length to prevent noise disturbances. ) The inner circuit board could be destroyed by a voltage surge. Use of surge absorption elements is highly recommended. Surge resistance below the power supply voltage value indicated in the maximum rated values section. 8) Please use a stabilized power supply. Power supply noise can cause operating errors. Noise resistance 20V or less (Square waves with a width of 50ns or 1s) To reduce the effect of power supply noise, install a capacitor on the sensor's power supply pin. 9) Operating errors can be caused by noise from static electricity, lightning, cell phone, amateur radio, broadcasting offices etc... 10) Detection performance can be reduced by dirt on the lens, please be careful. 11) The lens is made of soft materials (Polyethylene). Please avoid adding weight or impacts that might change its shape, causing operating errors or reduced performance. 12) Operating "temperatures" and "humidity level" are suggested to prolong usage. However, they do not guarantee durability or environmental resistance. Generally, high temperatures or high humidity levels will accelerate the deterioration of electrical components. Please consider both the planned usage and environment to determine the expected reliability and length of life of the product. 13) Do not attempt to clean this product with any detergent or solvent, such as benzene or alcohol, as these can cause shape or color alterations. 14) Avoid storage in high, low temperature or liquid environments. As well, avoid storage in environments containing corrosive gas, dust, salty air etc. It could cause performance deterioration and the sensor's main part or the metallic connectors could be damaged. 15) Storage conditions Temperature: +5 +40 (+41 +104F) Humidity: 30 75% Please use within 1 year after products delivery. Issued on Mar. 26th,2018 (SKC0410-P01,02,140701) Specifications Product Name PIR MOTION SENSOR "PaPIRs" Ver.1.1 Model No. EKMC760111 K Page: 9 7.When Designing Your Product To maintain specified detection capability, please place and expose the sensor so that tip of lens will be more than 1.3mm above the chassis. The hole of the chassis should have a taper depending on the lens shape, or have a bigger hole. Recommended Hole Drilling Diameter Chassis's Hole-drilled Part Recommended PCB Pattern Diagram Issued on Mar. 26th,2018 (SKC0410-P01,02,140701) Specifications Product Name PIR MOTION SENSOR "PaPIRs" Model No. Ver.1.1 EKMC760111 K Page: 10 8.Special Notice As improvements are continually being made, the specifications or design of this product are subject to change without notice. Please strictly follow the "Safety Precautions" and "Operating Precautions" on the specifications sheet. Normal functioning cannot be expected if used in environments or conditions other than those specified above. We are deeply committed to providing the highest quality control for this product. Nevertheless: 1) For issues not addressed above, we invite you to share your suggestions, or details about your company's usage conditions, installation, specifications, needs of end users, and applications for this sensor. 2) To reduce the risk of harm caused by product failure to human life or assets, this product should always be used in conjunction with other safety measures, such as protective circuitry, double layered circuit boards, etc., and used within the guaranteed performance, efficiency or special characteristics values stated in the specification sheet. 3 This product is warranted for a period of one year, from date of delivery, applicable only if the product is used in accordance with the precautions mentioned above and the specifications sheet. We will replace or repair at the delivery location any malfunctioning or defective part or entire product if such defect or malfunction is caused by us. However, the above warranty shall be void in the following circumstances: a) Damage caused to something else than the product itself. b) Damage or loss resulting during transportation, storage or handling after the date of supply. c) Phenomenon unforeseeable in the state of the technology as of the supply date. d) Damage caused by natural or unnatural events such as fire, earthquake, flood, or conflicts beyond our control. Issued on Mar. 26th,2018 (SKC0410-P01,02,140701)