Panasonic MA Motion Sensor (AMA1, AMBA1, 2, 3) Active infrared (area reflective) we human detection sensor MA MOTION SENSOR Thin short type Short type Middle type (Mounting direction : V type) (Mounting direction : H type) (Mounting direction : H type) e e Long type Long type | S C O Nn | Nn U eC (Mounting direction : H type) (Mounting direction : V type) @ Reliable detection hardly influenced by reflectivity of targeted objects @ Ready-to-use with DC power source (built-in oscillation circuit type) Capability to adjoin sensors (External triggering type) @ RoHS compliant Typical applications @ Equipment around water: automatic lighting of wash-units, toilets, automatic flush @ Stores and financial markets: automatic doors, lighting, ATM, visitor sensors @ Amusement equipment: seating detection for pachinko machines, game displays Medical equipment markets: noncontact switches Ordering information My TLE A :Thin short type Detection distance type b Triggering function dciassication by ) | peratin voltage MA Motion sensor (shape 1: External triggering output method & mounting direction 2: Free-ranging power type BA: MA Motion sensor 1: Short type type 0: NPN open collector/H type (5.5 V.DC to 27 V.DC) 2: Middle type 4: Built-in oscillation 5: NPN open collector/V type 9: 5V.DC type 3: Long type circuit type 6: PNP open collector/V type (4.5 V.DC to 5.5 V.DC) (Internal trigger) Rated detection distance Unit : cm inch Part No. 08 a 20 Mil hort Long t 02 | 03 | 04 | 05 | 06 | O7 {Muted Og [wire 44 | 12) 13) 14] 15 | 16 | 17 | 18 | 19 [toate Type reed 0) need 10) need 20) Thin short ~~}. f 2} 5) 2.7 2 fF 2 fF 2 | 10} 2} 2} 2} ft LP} } 8 type 1.969 3.937 5.906 Short type - - - 6 6 7 8 9 tn O-| - - - - - - - - - - 1.969}2.362)2.756}3.150/3.543}3.937 20/30/40/50/60;/70/80/ | | |. 7|_{|_]_J_/7_7_] 7. 7.874|11.811]15.748]19.685]23.622|27.559]31.496 Long type _ | 30 | 40 | 50 | 60 |} 70 | 80 | 90 | 100] 110} 120 | 130 | 140 | 150 | 160 | 170 | 180 | 190 | 200 11.811]15.748}19.685]23.622)27.559}31.496|35.443} 39.37 |43.307)47.244/51.181|55.118}59.055]62.992]66.929}70.866}74.803} 78.74 Middle type Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.Panasonic MA Motion Sensor (AMA1, AMBA1, 2, 3) Product types @ Detection distance type (distance limited) 1) Thin short type (V type) Standard packing: Carton: 20 pcs.; Case: 200 pcs. . Rated detection Built-in oscillation circuit type External triggering type Operating voltage Output method distance Seal ror 5 cm 1.969 inch AMA145905 AMA115905 NPN open - collector output 10 em 3.987 inch AMA1459 AMA1159 45 VDC to5.5V.DC P 15 cm 5.906 inch AMA145915 AMA115915 _ _ PNP 5 cm 1.969 inch AMA146905 AMA116905 collector output 10 om 3.987 inch AMA1469 AMA1169 15 cm 5.906 inch AMA146915 AMA116915 Note: If using multiple sensors adjacently or reducing power consumption, contact us for the optimal external trigger type. 2) Short type (H type) Standard packing: Carton: 20 pcs.; Case: 200 pcs. Mounting direction : H type Rated operating Rated detection Short type voltage distance Built-in oscillation circuit type External triggering type Part No. Part No. 5 cm 1.969 inch AMBA140905 AMBA110905 6 cm 2.362 inch AMBA140906 AMBA110906 7 cm 2.756 inch AMBA140907 AMBA110907 4.5 V.DC to 5.5 V.DC 8 cm 3.150 inch AMBA140908 AMBA110908 9 cm 3.543 inch AMBA140909 AMBA110909 10 cm 3.937 inch AMBA1409 AMBA1109 5 cm 1.969 inch AMBA140205 AMBA110205 6 cm 2.362 inch AMBA140206 AMBA110206 7 cm 2.756 inch AMBA140207 AMBA110207 5.5 V.DC to 27 V.DC 8 cm 3.150 inch AMBA140208 AMBA110208 9 cm 3.543 inch AMBA140209 AMBA110209 10 cm 3.937 inch AMBA1402 AMBA1102 Note: If using multiple sensors adjacently or reducing power consumption, contact us for the optimal external trigger type. 3) Middle type (H type) Standard packing: Carton: 20 pcs.; Case: 200 pcs. Mounting direction : H type Rated operating Rated detection Middle type voltage distance Built-in oscillation circuit type External triggering type Part No. Part No. 20cm 7.874 inch AMBA240902 AMBA210902 30 cm 11.811 inch AMBA240903 AMBA210903 40 cm 15.748 inch AMBA240904 AMBA210904 4.5 V.DC to 5.5 V.DC] 50cm 19.685 inch AMBA240905 AMBA210905 60 cm 23.622 inch AMBA240906 AMBA210906 70 cm 27.559 inch AMBA240907 AMBA210907 80 cm 31.496 inch AMBA2409 AMBA2109 20cm 7.874 inch AMBA240202 AMBA210202 30 cm 11.811 inch AMBA240203 AMBA210203 40 cm 15.748 inch AMBA240204 AMBA210204 5.5 V.DC to 27 VDC} 50cm 19.685 inch AMBA240205 AMBA210205 60 cm 23.622 inch AMBA240206 AMBA210206 70 cm 27.559 inch AMBA240207 AMBA210207 80 cm 31.496 inch AMBA2402 AMBA2102 Note: If using multiple sensors adjacently or reducing power consumption, contact us for the optimal external trigger type. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.Panasonic 4) Long type MA Motion Sensor (AMA1, AMBA1, 2, 3) Standard packing: Carton: 20 pes.; Case: 200 pes. Mounting direction : H type | Mounting direction: V type Long type eee Foc ial Built-in oscillation | External triggering | Built-in oscillation | External triggering circuit type type circuit type type Part No. Part No. Part No. Part No. 30 cm 11.811 inch AMBA340903 AMBA310903 AMBA345903 AMBA315903 40 cm 15.748 inch AMBA340904 AMBA310904 AMBA345904 AMBA315904 50 cm 19.685 inch AMBA340905 AMBA310905 AMBA345905 AMBA315905 60 cm 23.622 inch AMBA340906 AMBA310906 AMBA345906 AMBA315906 70 cm 27.559 inch AMBA340907 AMBA310907 AMBA345907 AMBA315907 80 cm 31.496 inch AMBA340908 AMBA310908 AMBA345908 AMBA315908 90 cm 35.433 inch AMBA340909 AMBA310909 AMBA345909 AMBA315909 100 cm 39.370 inch AMBA340910 AMBA310910 AMBA345910 AMBA315910 A5VDC to$5 VDC 110 cm 43.307 inch AMBA340911 AMBA310911 AMBA345911 AMBA315911 a 120 cm 47.244 inch AMBA340912 AMBA310912 AMBA345912 AMBA315912 130 cm 51.181 inch AMBA340913 AMBA310913 AMBA345913 AMBA315913 140 cm 55.118 inch AMBA340914 AMBA310914 AMBA345914 AMBA315914 150 cm 59.055 inch AMBA340915 AMBA310915 AMBA345915 AMBA315915 160 cm 62.992 inch AMBA340916 AMBA310916 AMBA345916 AMBA315916 170 cm 66.929 inch AMBA340917 AMBA310917 AMBA345917 AMBA315917 180 cm 70.866 inch AMBA340918 AMBA310918 AMBA345918 AMBA315918 190 cm 74.803 inch AMBA340919 AMBA310919 AMBA345919 AMBA315919 200 cm 78.740 inch AMBA3409 AMBA3109 AMBA3459 AMBA3159 30 cm 11.811 inch AMBA340203 AMBA310203 AMBA345203 AMBA315203 40 cm 15.748 inch AMBA340204 AMBA310204 AMBA345204 AMBA315204 50 cm 19.685 inch AMBA340205 AMBA310205 AMBA345205 AMBA315205 60 cm 23.622 inch AMBA340206 AMBA310206 AMBA345206 AMBA315206 70 cm 27.559 inch AMBA340207 AMBA310207 AMBA345207 AMBA315207 80 cm 31.496 inch AMBA340208 AMBA310208 AMBA345208 AMBA315208 90 cm 35.433 inch AMBA340209 AMBA310209 AMBA345209 AMBA315209 100 cm 39.370 inch AMBA340210 AMBA310210 AMBA345210 AMBA315210 55 VDC to 27 VDC 110 cm 43.307 inch AMBA340211 AMBA310211 AMBA345211 AMBA315211 120 cm 47.244 inch AMBA340212 AMBA310212 AMBA345212 AMBA315212 130 cm 51.181 inch AMBA340213 AMBA310213 AMBA345213 AMBA315213 140 cm 55.118 inch AMBA340214 AMBA310214 AMBA345214 AMBA315214 150 cm 59.055 inch AMBA340215 AMBA310215 AMBA345215 AMBA315215 160 cm 62.992 inch AMBA340216 AMBA310216 AMBA345216 AMBA315216 170 cm 66.929 inch AMBA340217 AMBA310217 AMBA345217 AMBA315217 180 cm 70.866 inch AMBA340218 AMBA310218 AMBA345218 AMBA315218 190 cm 74.803 inch AMBA340219 AMBA310219 AMBA345219 AMBA315219 200 cm 78.740 inch AMBA3402 AMBA3102 AMBA3452 AMBA3152 Note: If using multiple sensors adjacently or reducing power consumption, contact us for the optimal external trigger type. @ Detection performance 1) Thin short type (Measuring conditions: ambient temp. : 25 C 77 F; operating voltage : 5 V.DC) os Unit Thin short type Measured cm inch 5 1.969 10 3.937 15 3.937 conditions Minimum 45 1.772 90 3.543 1355.315 wath eerie Rated detection distance Typical | mminch 50 1,969 100 3.937 150 5.906 milecten Beare * Maximum 55 2.165 110 4.331 165 6.496 Measuring tolerance Typical % 10 25 35 Reflection rate: 90 % to 18 % Usable ambient | Brightness of brightness sensor surface _|M@ximum ene See the drawing (Fig. 1) on (Resistance to _ | Brightness of Maxi x 24.000 the Brightness next page. ambient light) * | reflection surface |" 2X" : Notes : 1. Ambient brightness: 500 Ix %*2. Prevent direct light (within 30 against the optical axis of the sensor) from entering into the sensor. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.Panasonic MA Motion Sensor (AMA1, AMBA1, 2, 3) 2) Short type (Measuring conditions : ambient temp.: 25 C 77 F; operating voltage: 5 V.DC type 5 V.DC, Free-ranging power type 24 V.DC) Unit Short type *' items ae 5 6 7 5 9] 10 ve inch | 1.969 | 2.362 | 2.756 | 3.150 | 3.543 | 3.937 in 45 54 63 72 81 90 Minimum 1.772 | 2.126 | 2.480 | 2.835 | 3.189 | 3.543 . . . mm 50 60 70 80 90 100 /with a standard Rated detection distance Typical | inch | 1.969 | 2.362 | 2.756 | 3.150 | 3.543 | 3.937 |reflection board 55 66 77 88 99 110 Maximum 2.165 | 2.598 | 3.031 | 3.465 | 3.898 | 4.331 Measuring tolerance Typical % 10 15 20 25 [Reflection rate: 90 % to 18 % Usable ambient | Brightness of ; brightness sensor surface |M@ximum Wg 30,000 ce the aieying (Resistance to__ | Brightness of Maxi 24.000 nee age ambient light) * | reflection surface |Maximum page. Notes : +1. After the order receipt, the average rated detecting distance can be increased to max 15 cm 5.906 inch. Please consult us. %2. Prevent direct light (within 30 against the optical axis of the sensor) from entering into the sensor. 3) Middle type (Measuring conditions: ambient temp.: 25 C 77 F; operating voltage: 5 V.DC type 5 V.DC, Free-ranging power type 24 V.DC) Unit Middle type *' Hioseuea Items em 20 30 40 50 60 70 80 conditions inch | 7.874 |11.811]15.748]19.685|23.622/27 559/31.496 palin 190 | 285 | 380 | 475 | 570 | 665 | 760 7.480 |11.220)14.961]18.701)22.441|26.181/29.921 ' . mm | 200 | 300 | 400 | 500 | 600 | 700 | 800 |with a standard Rated detection distance = = [Typical | inch | 7.874 |11.811|15.748]19.685/23,622|27.559|31 .496| reflection board Mandrniuiti 210 | 315 | 420 | 525 | 630 735 | 840 8,268 |12.402/16.535]20.669]24.803/28.937)/33.071 Measuring tolerance Typical % 3 5 10 Reflection rate: 90 % to 18 % Usable ambient | Brightness of ; brightness sensor suriace |Maximum be 30,000 = es aig (Resistance to | Brightness of besa 24.000 next age ambient light) * | reflection surface |" page. Notes : +1. After the order receipt, the average rated detecting distance can be increased to max 110 cm 43.307 inch, Please consult us. #2, Prevent direct light (within 30 against the optical axis of the sensor) from entering into the sensor, 4) Long type (Measuring conditions: ambient temp.: 25 C 77 F; operating voltage: 5 V.DC type 5 V.DC, Free-ranging power type 24 V.DC) Unit Long type WeHoareal ltems em | 30) | 40 | 50) | 66 | 7@))) BO || SO | 108) 110 conditions inch |11.811) 15.748] 19.6851 23,622) 27 559131496] 34.433] 39.370) 43.307 binienurn 285 | 380 | 475 | 570 | 665 | 760 | 855 | 950) 1045 14.220) 14.961 | 18.701 | 22.441 | 26.181 | 29.921 133.661) 37.402] 41.142 . . . mm | 300 | 400 | 500 | 600 | 700 | 800 | 900 | 1000} 1100|with a standard Rated detection distance = [Typical _| inch |11.811] 15.748] 19.685|23.622|27.559|31,496| 34.433]39.370| 43.307| reflection board ssn 315 | 420 | 525 | 630 | 735 | 840 | 945 |} 1050/1155 12.402] 16.535] 20.669 | 24.803] 28.937 |33.071]37.205] 41.339] 45.472 Measuring tolerance Typical % 3 5 Reflection rate: 90 % to 18 % Usable ambient | Brightness of ; Pigrinices sensor surface |Maximum ty 30,000 = ie drawing esistance to. | Brightness of 5 : ambient light) * | reflection surface Maximum 24,000 next page. Unit Long type items om | 120] 180 | 140] 150| 160] 170] 180] 190] 200| Measured inch |47.244151.181 |55,118/59.055| 62.9921 66.929] 70.866) 74.803) 78.740 Sivas 1140| 1235] 1330| 1425] 1520| 1615) 1710| 1805] 1900 44 882) 48.622|52.362| 56,102 |59.842|63.583) 67.323] 71,063) 74,803 ; : : mm |1200} 1300] 1400] 1500) 1600} 1700} 1800) 1900] 2000|with a standard Rated detection distance = [Typical | inch |47.244[51.181 [55.118|59.055|62.992|66 929] 70.866|74.803| 78.740|reflection board Meanie 1260] 1365} 1470) 1575) 1680) 1785) 1890] 1995/2100 49.606} 53.740/57.874| 62.008] 66.142] 70.275] 74.409] 78.543) 82.677 Measuring tolerance Typical % 5 10 15 Reflection rate: 90 % to 18 % Usable ambient | Brightness of brightness sensor surface |Maximum iy 30,000 a is drawing (Resistance to | Brightness of Maximum 24 000 nad page ambient light) * | reflection surface ; Notes : + Prevent direct light (within 30 against the optical axis of the sensor) from entering into the sensor. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.Panasonic MA Motion Sensor (AMA1, AMBA1, 2, 3) For thin short type: Standard reflection board : 90% reflection rate. For short type: Standard reflection board: 100 mm 3.937 inch square area, 90% reflection rate. * For middle type: Standard reflection board: 200 mm 7.874 inch square area, 90% reflection rate. e For long type: 150 mm 5.906 inch square area, Notes :1, Detecting an object within the maximum preset detection distance. 2, Distance deviation = ae x 100 (9%) a: detection distance of detection target with reflectance of 90 %. b: detection distance of standard detection target with reflectance of 18 %. Standard reflection board: 500 mm 19.685 inch square area, 90% reflection rate. <Fig. 1> [Brightness of sensor surface] ey Hd; FR Cee Q Light meter SSG Notes : If sunlight or strabe/inverter light (including the regular reflection light from glasses and mirrors) directly enters from the inhibition area, those lights [Brightness of reflection surface] Senco 30s(@,07)845 \ > on wo Ne -< obs Rated detection distance may cause malfunction of the sensor.sensor) from entering into the sensor Absolute maximum rating | Measuring condition: ambient temp.: 25 C 77 F <<$ ep the ; oe 3 ~ Light meter Reflection board Items Absolute maximum rating Built-in oscillation circuit type External triggering type Items 5 V.DC type Free-ranging power type 5 V.DC type Free-ranging power type Power supply voltage 0.3 V.DC to 6.0 V.DC] -0.3 V.DC to 30 V.DC |-0.3 V.DC to 6.0 V.DC| -0.3 V.DC to 30 V.DC Output dielectric strength 30 V.DC 30 V.DC Output flow current 100 mA 10 mA* Usable ambient temperature -25 C to +75 C +5 F to +131 F (No freezing) -25 C to +75 C +5 F to +131 F (No freezing) Storage temperature ~30 C to +85 C 4 F to +176 F -30 C to +85 C -4 F to +176 F Notes : + Thin short type is only: 100 mA Electrical characteristics | Measuring conditions : ambient a 25 C 77 F, operating voltage: 5 V.DC type, free-ranging power type 24 V. DC 1) Built-in oscillation circuit type Thin short type* uA d Items Symbol NPN PNP Short type | Middle type | Long type ne output type | output type Minimum 5.0 V.DC type : 4.5V.DC / Free-ranging power type : 5.5 V.DC Rated operating voltage Typical | VDD ~ Maximum 5.0 V.DC type : 5.5 V.DC /Free-ranging power type : 27 V.DC Minimum ~ / 5.0 V.DC type : 4.5 mA No detection _ | Typical It 4.5 mA Free-ranging power type : 5.6 mA consumption ta (lout=0 mA) Minimum = ; : 5.0 V.DC type : 7.0mA Detection Typical It 7.OmA | 11.0mA Free-ranging power type : 9.1 mA ' 5.0 V.DC type: 11.2 mA aia EEN, | Weeeiines Free-ranging power type : 14.2 mA Measuring cycle Typical TE 8 ms/cycle Output Remain voltage [Maximum] Vr | 1.0V.DC | 1.2V.DC 1.0 V.DC It=100 mA characteristics | Leakage current |Maximum| II 5 pA 3 pA V=30 V.DC Notes : + The thin short type is only available for 5 V.DC, Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.Panasonic MA Motion Sensor (AMA1, AMBA1, 2, 3) 2) External triggering type (trigger conditions: trigger pulse width = 20 us and trigger synchronization = 5 ms) Thin short type*" Rieasured Items Symboll NPN PNP Short type Middle type Long type Aoneilone output type} output type Minimum 5.0 V.DC type : 4.5 V.DC / Free-ranging type : 5.5 V.DC Rated operating voltage |Typical | VDD = Maximum 5.0 V.DC type : 5.5 V.DC / Free-ranging type : 27 V.DC Minimum = a Typical | Ib 0.1 mA 5.0 V.DC type: 0.1 mA/Free-ranging type: 1.0 mA] +2 #b trae Maximum 0.3mA 5.0 V.DC type: 0.3 mA/Free-ranging type: 1.8 mA : Minimum ~ nen ain Typical Id | 26mA | 67 mA {5.0 V.DC type: 0.5 mA/Free-ranging type: 1.4mA| 2 ed awe Maximum 6.6mA | 9.6mA [5.0 VDC type: 3.4 mA/Free-ranging type: 4.5 mA consumption Output Minimum : OFF Typical la 2.2mMA 5.0 V.DC type: 2.2 mA/Free-ranging type: 3.1 MA] +2 a rues Maximum 6.2 MA 5.0 V.DC type: 6.2 mA/Free-ranging type: 7.2 mA ; Minimum - = epee Typical Ic | 4.2mA 8.5 mA [5.0 V.DC type: 2.4 mA/Free-ranging type: 3.3 mA] +2 #c Maximum 8.2mA | 12.5 mA [5.0 V.DC type: 8.2 mA/Free-ranging type: 9.3 mA Measuring cycle (Trigger interval) Typical Tt 5 ms/cycle Minimum 20 us External Fubewioh Maximum me 1/2 Tt nf 7 the distance nigger nae Minimum | Van 0.8V Maximum) Vr 3V 3 Response performance: time from trigger pulse fall to | Typical Tr Sms detection output Outout Remain voltage |Minimum | Vr | 1.0V.DC | 1.2 V.DC 1.0 VDC It=10 mA characteristics | Leakage current [Maximum] _II 5 pA 3 yA V=30 V.DC Notes : #1. The thin short type is only available for 5.0 V.DC. #2, The ratio between the 4 operating modes (+a to 4d) depends on the external trigger period and detector time, and the current consumption corresponds with this varying ratio. Trigger input if] | ba eb bc bd Operation |... ues 2 Pesce |S eeeers Stand by | | Internal sensor ] | [ operation OFF] 2 ms| 2ms| 2ms| 2ms| (approx.) (approx.) (approx.) = (approx.) Oo p ON pp ih tigger nou!) (With tigger input) (With tigger inp} (Wth tigger input) Non-detection statusinput|_ Detection status | (The output is latched by the previous trigger.) (The output is latched by the previous trigger.) #3. A high level is established in the open state due to pull-up by the internal circuit. (Refer to the connector wiring diagram.) Built-in oscillation circuit type (NPN output types of the AMA series and all of AMBA series) ON Power supply OFF (Output transistor] OFF (open collector) ON Crcut stability) Non-detection time status Datection Status Non-detection status Notes : #1. Circuit stability time : Max. 12 ms #4. The output transistor is open collector. The output transistor is turned ON by the sensor detection status and turned OFF by its non-detection status. Detection status: output transistor ON Non-detection status: output transistor OFF Output transistor GND (NPN output types of the AMA series and all of AMBA series) GND Detection status: output transistor ON Non-detection status: output transistor OFF Output transistor (PNP output types of the AMA series) (PNP output types of the AMA series) ON Power supply OFF - Output transistor ON (open collector) OFF Cieut abil] Non-detection Detection lime status status Non-detection status +2. During the time taken for the circuit to stabilize after the power is turned on, the ON/OFF status of the output transistor is not determined by whether the sensor is in the detection status or non-detection status. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.Panasonic MA Motion Sensor (AMA1, AMBA1, 2, 3) @ External triggering type ON Power supply on_| Vi External trigger Output transistor OFF open collector NPN output types ON Col of the AMA series AMBA series stably Non-detection} Detection | Non-detection | lime |_status status status ON - Output transistor PNP output types OFF Croat of the AMA series stabity] Non-detection| Detection | Non-detection time status status status I Notes : +1. Circuit stability time: Max. 12 ms %*2. During the time taken for the circuit to stabilize after the power is turned on, the ON/OFF status of the output transistor is not determined by whether the sensor is in the detection status or non-detection status.is not determined by whether the sensor is in the detection status or non-detection status. @ Wiring diagram of connector Tt: Min. 5 ms Tr: Max.5ms_: Viu | , External trigger Vin Lw] , ; Change Output (ON to OFF or | ou _| OFF to ON) Notes : The sensor recognizes at the VtH Vt. edge of an external trigger that the external trigger has been input. Built-in oscillation circuit type External triggering type Power supply Power supply L + Output External trigger Output NPN c a Exemal tigg r mt 1 output type Ne. C Tr #2 (No connection) + 3 3 ovo | GND Power supply Power supply Output PNP mee . Output 21 External trigger 1 output type No input (No connection) JUL 4 4 Notes: :1. The output transistor has an open collector structure. *2. *3. Detection status: Output transistor ON (connected to GND) Non-detection status: Output transistor OFF (open state) The status of the external trigger input is as follows: Open at the high level GND (less than 0.8 V) at the low level Do not apply a high voltage. Install capacitor (of 33 uF or over) on the power input terminal of the sensor in order to secure power superimposed noise resistance and stabilize the power supply voltage. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.Panasonic _ MA Motion Sensor (AMA1, AMBA1, 2, 3) Reference data eee Operating region characteristics How to interpret the graph Example: Operating area of the Short Type Operating area within the dotted lines| 100) with rated detection distance of 3.937 Objects that enter the entire area are detected. 8 cm 3.150 inch. ase Object BET Operating region for 0 erating area rr eer on wrhin the dotted lines 3.160 Inch Note: Hf only part of the object is in the detection area, itis not detected Operating area within the solid lines Objects that even partially enter the area are detected. bee 1875 Detection distance L (mm inch) 3 iy 301. 1.181 20| My ora? Object 30, Operating area 4 a b- ope the solid lines 0 20 737.1010 ger Mya ogaal Detection width W (mm inch) 1.-(1) Thin short type (AMA1D00O01) 1.-(2) Middle type (AMBA200000) 1.-(3) Long type (AMBA3SDOUOIOIOID) Short type (AMBA1OIICIOID) Operatin iors tor I 100 rated deletion distance Opening ron ne. 3937, of 10 om 3.937 inch _ B00) ao 2000}. a of 200 em 78.74 inch 90}. 9em3.534 inch 31.496 am 774 @ 3543 Seon = zoo}. 27-559 inch = sel = acer _ gH spud Som) = 1500 | ee ncn 2 23.622 inch e eens a7ttL Rentection boars E oq SOF Retlecton boars an E sanssy Reflection board ye = x mm ee x mm > . fOL encore Su OL? a74 = 7.874 ine 19.685 inch Zi 12801 19 685 x 19.685 p & 2362) (retlectivity: 90%) & 19.685] (reflectivity: 90%) 40cm G 49.213) (raftectivity: 90%) | 100 cm 8 an . 8 400 15,748 inch & 1000 39.37 inch @ Bis saar Bs a 8 15.748) aiirn 2 war Ss = 300] _. 11.811 inch S wol 3 30 Ris @ 29.528 ca & , 30} Ratiection 8 soo] Rellection acm 8 Reflection 2 board & 7 apap board a eae beara O78? x | 100, psa. 0394 3.937 9843 0 ap 0 f o L im 90 1. 90 10 10 0. oO By OM OOM IBN eT OM NT Detection width W (mm inch) Detection width W (mm inch) Detection width W (mm inch) Peete The CAD data of the products with a @of:\aar\ep mark can be downloaded from: http://industrial.panasonic.com/ (Common to the Built-in oscillation circuit type and External triggering type) Thin short type (V type) Short type (H type) CAD Data Ea CAD Data rads v1 2 6.5 Oy) a 068 1 . 16.25 29.0 Stamped side 0.640 1.142 {one side only) | over 7: nea 3 127 Connector surface oe - (Front lens surface) 6 | . aie rr | to na Optical aut 0.236 aT = Til 0.260) LL : . Fl 7 u Receiver] ! 20 0 2 Projector | O.787 * Rear side connector protrusion: Max. 0.4mm eile Lig L8 Middle type (H type) , CAD Data 22 [o.865 | 31, eLie* 19.35 . Connector surface 0.762 | (Front lens surface) - Optical surfac: | | l Receiver | | 2 Projector Tees cdi tol Lod 14 23.1 it MOBET 3.905 Og unit : mm inch |-__. 29.5. 016 1.161 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.Panasonic MA Motion Sensor (AMA1, AMBA1, 2, 3) (Common to the Built-in oscillation circuit tyoe and External triggering type) @ Long type (H type) @ Long type (V type) 2 GED CAD Data +4399 oa CAD Data Cd 49] Jace 165 0.394 ye) | 24.7 Connector surface [|] 0.972 (Front lens surface) | Optical surface 033, Optical 7 [ ptical \ 0294 So.t65 Surface 0.276 copnsetor Receiver A |_| va [ i 7 181 i 55 o : Receiver 2165 Projector 46 65 Th t | na 1.811] 2.559 0.276 | | + Projector 20__,| | __29.7___ | o 0.787 1.169 Max. 1 0.039 1695 290) MAX. 4] 0.039 unit : mm inch @ Thin short type (V type) @ Short type (H type) @ Middle type (H type) BMO04B-SRSS (J.S.T. Mfg. Co., Ltd.) 1: Output 2: GND 3: Power source 4. Built-in oscillation circuit type: N.C. External triggering type: external trigger input @ Long type (H type) DF13-4P-1.25DSA (HIROSE ELECTRIC CO., LTD.) : Output : GND : Power source . Built-in oscillation circuit type: N.C. External triggering type: external trigger input -NWOS cor DF13-4P-1.25DS(20 (HIROSE ELECTRIC CO., LTD.) External triggering type: external trigger input 4: Output DF13-4P-1.25DSA 3: GND (HIROSE ELECTRIC CO., LTD.) 2: Power source 4: Output 1. Built-in oscillation circuit type: N.C. 3: GND ; 2: Power source ; 1. Built-in oscillation circuit type: N.C. @ Long type (V type) (2) DF13-4P-1.25DSA (HIROSE ELECTRIC CO., LTD.) : Output GND : Power source . Built-in oscillation circuit type: N.C. External triggering type: external trigger input Spor External triggering type: external trigger input Connector with cable AMV9003 Connector with cable (for Thin short type) AMV9002 (for Short, Middle and Long type) 1. Built-in oscillation circuit type: N.C. External triggering type: external trigger input (Purple) 2. Power source (Brown) 3. GND (Blue) Lead wires AWG 28 4 4.541 oss 4, Output (Black) 0.177+.039 5 ___| | 6.65 S = | 0.262 Z }} The edge is soldered 15025 SS 5.906+0.197 Socket housing DF13-4S-1.25C. (HIROSE ELECTRIC CO., LTD.) unit : mm inch 1. Output (Black) 2. GND (Blue) 3. Power source (Brown) Lead wires UL 10368, AWG 30 4, Start signal input (Purple) 5 0.197, Yl 5 Keates oe Neely 4542 Y Solder coated 0.170.079 150+5 5.906+0.197 Socket housing SHR-04V-S. (WS.TMfg.Co., Lid) unit : mm inch Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.Panasonic MA Motion Sensor (AMA1, AMBA1, 2, 3) i Use environment 1) Avoid use in the steamy or dusty environment, the corrosive gas, an environment where organic solvent can be adhered. 2) When using in a high-noise environment, perform countermeasures such as installing capacitor (of 33 UF or over) on the power input terminal of the sensor. Before use, check the performance under actual use conditions. i Wire connection 1) Before the power is supplied, recheck wiring as misconnection may damage the internal circuit. (ensure to avoid reverse connection) 2) Use wires shorter than 3 m 9.842 ft to protect the internal circuit. Before use, check under actual use conditions if there is no influence by surrounding environments. 3) Do not repeatedly attach/detach the connector. @ Detecting part 1) Keep the detecting surface clean. The detecting surface is resistant to trash/ dust, however, if an excessive amount of trash/dust adhere to the surface, it may reduce the margin of detecting distance. 2) Dew condensation on the detecting surface may cause malfunction. 3) The sensor aims to detect human bodies. If the targeted object has extremely low reflectivity (e.g., objects frosted by black rubbers) or extremely high reflectivity (e.g., objects which regularly reflect: mirrors, glasses or glossy papers), the sensor may not be able to detect or the detecting distance may become unstable. 4) The front face of the lense and the case are polycarbonate-based. Generally they are stable against water, alcohol, oil, salt and weak acids. However, avoid alkalis, aromatic hydrocarbons and halogenated hydrocarbons as those substances may expand or melt the lense and the case. 5) If placing filters (covers) in front of the sensor and perform detection through the filters, following may occur: detection of the filters (covers), changes of the detecting distance or unstable operations. 6) If sensors are in facing positions, light from the opposing sensor may cause mutual interferences and malfunction. Before use, check the installation conditions. 7) When arranging multiple sensors in parallel, keep the interval of neighboring sensors as below or over. Before use, ensure that there is no mutual interference. Part No. Sensor interval AMBA1 series 5 cm 1.969 inch AMA1 series 8 cm 3.150 inch AMBA2 series 10 cm 3.937 inch AMBAS series 20 cm 7.874 inch Hi Recommended mounting direction As below, install the sensor for the X and Z advancing directions of the targeted mt Prag ciancies direction ein Object direction Advancing Je direction Object </ When advancing from the Y direction, the Object _ detecting distance may become unstable. For general precautions, see General precautions for motion sensors in the next page. # Ambient operating conditions 1) Temperature: Refer to the absolute maximum ratings for the temperature of each individual sensor. 2) Humidity : 15 % to 85 % RH (No freezing nor condensation at low temperature) 3) Atmospheric pressure: 86 to 106 kPa 4) Because the humidity range differs depending on the ambient temperature, the humidity range indicated below should be used. Continuous operation of the switch is possible within this range, but continuous use near the limit of the range should be avoided. This humidity range does not guarantee permanent performance. <MA Motion Sensor> Us Humidity (%RH) 85 4 Tolerance range (Avoid (Avoid freezing when | condensation used at temperatures | temperatures lower than 0 C 32F) higher than 0 C Ue Y/) 151228) -25 0 75 -13 +32 +167 Temperature (C, F) In general, degradation of electronic devices accelerates when they are operated under conditions of high temperature or high humidity. Before use, confirm the reliability of the sensors under the expected operating conditions. 5) The sensors do not have a water-proof or dust-proof construction. Depending on the ambient operating conditions, some means of providing protection from water and dust and preventing the formation of ice and condensation must be provided prior to using the sensors. If a sensor is used with a cover installed, the initial detection performance specifications may not be able to be met. Confirm the operation under the actual operating conditions. 6) Take care to avoid exposing the sensors to heat, vibration or impact since malfunctioning may result. i Concerning external surge voltages Since the internal circuitry may be destroyed if an external surge voltages is supplied, provide an element which will absorb the surges. i Concerning power supplysuperimposed noise 1) Use a regulated power supply as the power supply. Otherwise, power supplysuperimposed noise may cause the sensors to malfunction. 2) To maintain the power supply noise performance, be certain to connect a capacitor (33 UF or more) to the sensor power supply input terminal in order to stabilize the power supply voltage. Hi Drop damage If the sensor is dropped, damage can occur resulting in incorrect operation. If dropped, be sure to do a visual check of the exterior for noticeable damage and check the operation characteristics for faulty operation. i Concerning the circuit sides Since the circuit sides given in this catalog are not protected in terms of circuit design, check out the performance and reliability of the circuits prior to using the sensors. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.Panasonic MA Motion Sensor (AMA1, AMBA1, 2, 3) Safety precautions Head the following precautions to prevent injury or accidents. Do not use these sensors under any circumstances in which the range of their ratings, environment conditions or other specifications are exceeded. Using the sensors in any way which causes their specifications to be exceeded may generate abnormally high levels of heat, emit smoke, etc., resulting in damage to the circuitry and possibly causing an accident. Before connecting a connector, check the pin layout by referring to the connector wiring diagram, specifications diagram, etc., and make sure that the connector is connected properly. Take note that mistakes made in connection may cause unforeseen problems in operation, generate abnormally high levels of heat, emit smoke, etc., resulting in damage to the circuitry. e Do not use any motion sensor which has been disassembled or remodeled. e Protection circuit recommended The possible failure mode is either open or short of the output transistor. An excess heat is the cause for short mode failure. For any important and serious application in terms of safety, add protection circuit or any other protection method. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.