Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Electric Double Layer Capacitors (Gold Capacitor)/ EN
5.9±0.1
1.9±0.2
11.3±0.3
1.4±0.2
6.8 max.
6.8 max.
1.8 max.
2.5±0.3
1.4±0.3 2.0±0.3
0.15±0.05
+
–
+
+
–
–
(0.1±0.3)
0.5±0.1 0.5±0.1
6.8 max.
2.38±0.35
0.20 max.
2±0.3
2.6±0.3
1.9±0.4
10.0 max.
10.0 max.
1.8 max.
+
1.85 max.
0.15±0.03
φ6.8 max.
0.9±0.3
(1.24)
0.15+0.1
– 0.2
6.95 +0.1
– 0.25
5.0 0
– 0.2
01
23 F
5.0 0
– 0.2
0.9±0.3
■Features
● Re-fl ow soldering method available (250 °C)
● Miniaturized : Longer life and environmentally friendly
● RoHS directive compliant
Surface Mount Type
Series: EN
■Specifi cations
Category Temp. Range –10 °C to +60 °C
Maximum Operating Voltage 3.3 V.DC
Nominal Capacitance 0.2 F
Maximum Operating Current 10 µA max.
Stability at low
temperature and high
temperature
Category temp. range (–10 °C)
Capacitance change ±30 % of initial measured value at +20 °C
Internal resistance <10 times of initial measured value at +20 °C
Category temp. range (+60 °C)
Capacitance change ±30 % of initial measured value at +20 °C
Internal resistance < measured value at +20 °C
Endurance
After 500 hours application of 3.3 V. DC at +60 °C, the capacitor shall meet the following limits.
Capacitance change ±30 % of initial measured value
Internal resistance 4 k액 or less
Shelf Life
After 500 hours storage at +60°C without load, the capacitor shall meet the following limits.
Capacitance change ±30 % of initial measured value
Internal resistance 1 k ohm or less
High temperature
High humidity
After 500 hours storage at +40 °C, 90 to 95 % R.H., the capacitor shall meet the specifi ed
limits for shelf life.
■Di men sions in mm(not to scale)
■Recommended Applications
● Memory cards(power supply to hold memory),
mobile phones, PDAs, digital cameras.
■Standard Products
Maximum
Op er at ing
Volt age Capacitance Capacitance
range
Internal
resistance Mass Part number
Min. Packaging
Q’ty
(V.DC) (F) (F) (액) at 1kHz (g) Reel (pcs)
3.3 0.2 0.16 to 0.36 < 200 0.2 (Approx.) EECEN0F204( ) 2000
The re-fl ow condition / taping dimensions are explained on p.197, 198 of our Catalog.
Please use it as a reference guide.
( ) : Please use AK, RK or J2 to indicate terminal type.
Note : 1. When the capacitor is being used in a high temperature and high humidity environment for a long period, brown deposited
materials might be found around the sealing area. However, the materials are insulators and will not affect any electrical
characteristics of the capacitor.
2. Do not use refl ow soldering when cell voltage is above 0.3 V.
Type AK Type RK Type J2
Feb. 2008
