Solid-state Relay G3NE Compact, Low-cost, SSR Switching 5 to 20 A Wide load voltage range: 75 to 264 VAC Dedicated, compact aluminum PCB and power elements used. Built-in varistor effectively absorbs external surges. Quick-connect #110 input terminals and #250 output connections. Approved by UL and CSA. RCE Ordering Information Isolation Zero cross function Phototriac Yes Indicator No 5 A at 100 to 240 VAC (5 A at 75 to 264 VAC) No Note: Rated output load (applicable output load) Rated input voltage 5, 12, 24 VDC Model G3NE-205T-US G3NE-205T-2-US 10 A at 100 to 240 VAC (10 A at 75 to 264 VAC) G3NE-210T-US G3NE-210T-2-US 20 A at 100 to 240 VAC (20 A at 75 to 264 VAC) G3NE-220T-US G3NE-220T-2-US 5 A at 100 to 240 VAC (5 A at 75 to 264 VAC) G3NE-205TL-US G3NE-205TL-2-US 10 A at 100 to 240 VAC (10 A at 75 to 264 VAC) G3NE-210TL-US G3NE-210TL-2-US 20 A at 100 to 240 VAC (20 A at 75 to 264 VAC) G3NE-220TL-US G3NE-220TL-2-US When ordering, specify the input voltage. Accessories (Order Separately) Heat Sink The following heat sinks are thin and can be track-mounted. See Dimensions for details. Model Applicable SSR Y92B-N50 G3NE-205T(L)/-210T(L) Y92B-N100 G3NE-220T(L) Specifications Ratings Input Rated voltage Operating voltage Voltage level Must operate Must release Input impedance With zero cross function Without zero cross function 5 VDC 4 to 6 VDC 4 VDC max. 250 20% 300 20% 12 VDC 9.6 to 14.4 VDC 9.6 VDC max. 600 20% 800 20% 24 VDC 19.2 to 28.8 VDC 19.2 VDC max. 1.6 k20% Note: 176 1 VDC min. Each model has 5-VDC, 12-VDC, and 24-VDC input versions. G3NE G3NE Output Model Applicable load Load voltage range g Rated load voltage Load current With heat sink G3NE-205T(L)-(-2)US 75 to 264 VAC Without heat sink 0.1 to 5 A 0.1 to 5 A 60 A (60 Hz, 1 cycle) G3NE-210T(L)-(-2)US 0.1 to 10 A (see note) 0.1 to 5 A 150 A (60 Hz, 1 cycle) G3NE-220T(L)-(-2)US 0.1 to 20 A (see note) 0.1 to 5 A 220 A (60 Hz, 1 cycle) Note: 100 to 240 VAC Inrush current These values apply when using a dedicated radiator or a radiation plate of specified size. Characteristics Item G3NE-2jjT-(-2)US G3NE-2jjTL-(-2)US Operate time 1/2 of load power source cycle + 1 ms max. 1 ms max. Release time 1/2 of load power source cycle + 1 ms max. Output ON voltage drop 1.6 V (RMS) max. Leakage current 5 mA max. (at 100 VAC) 10 mA max. (at 200 VAC) Insulation resistance 100 M min. (at 500 VDC) Dielectric strength 2,000 VAC, 50/60 Hz for 1 min Vibration resistance Malfunction: 10 to 55 Hz, 1.5-mm double amplitude Shock resistance Malfunction: 1,000 m/s2 Ambient temperature Operating: -30C to 80C (with no icing nor condensation) Storage: -30C to 100C (with no icing nor condensation) Ambient humidity Operating: 45% to 85% Approved standards UL508 File No.E64562/CSA C22.2 (No.0, No.14) File No. LR35535 TUV R9051064 (VDE0435) (EN60950) Weight Approx. 37 g Engineering Data Load Current vs. Ambient Temperature Characteristics G3NE-210T(L)-(-2)US Load current (A) Load current (A) With standard heat sink (Y92B-N100) or aluminum plate measuring 300 mm x 300 mm x 2 mm (W x H x D) With standard heat sink (Y92B-N50) or aluminum plate measuring 100 mm x 100 mm x 2 mm (W x H x D) Without heat sink Ambient temperature (C) G3NE-220T(L)-(-2)US Without heat sink Ambient temperature (C) Load current (A) G3NE-205T(L)-(-2)US Without heat sink Ambient temperature (C) 177 G3NE G3NE Inrush Current Resistivity Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.) G3NE-205T(L)-(-2)US Inrush current (A. Peak) G3NE-220T(L)-(-2)US Inrush current (A. Peak) Inrush current (A. Peak) G3NE-210T(L)-(-2)US Energizing time (ms) Energizing time (ms) Energizing time (ms) Dimensions Note: All units are in millimeters unless otherwise indicated. G3NE-205T(L)/210T(L)/220T(L)-(-2)US 3.5 dia. hole Terminal Arrangement/ Internal Connections (Top View) 47.5 max. 37.5 max. 14.5 1 3+ 300.5 Input voltage Two #110 (t = 0.5) (Faston tab or equivalent)* 6.5 Two #250 (t = 0.8) (Faston tab or equivalent) 7.1 2.9 Input 4- Load 2 Load power supply 7.95 6 11.5 max. 3 Mounting Holes * G3NE-2jjT(L)-2-US: Two, #187 (t=0.5) (Faston tab or equivalent) Heat Sink Y92B-N50 Input Two, 3.5-dia. or M3 holes 300.2 Mounting Holes 4.6 dia. hole Two, M3 holes Two, M4 holes Two, 3.2-dia. holes 44 max. 30 35 30.50.3 47.6 5.6 47 max. 5 900.4 Two, 4.4-dia. or M4 holes 4.5 6 77 max. 51 max. 900.3 Weight: approx. 200 g 100 max. 350.2 Y92B-N100 4.6 dia. hole Two, M3 holes Two, M4 holes 71 max. 35 30.50.3 Two, 3.2-dia. holes Mounting Holes 30 75 max. 900.4 47.6 77 max. 5.6 5 28 100 max. 4.5 Two, 4.4-dia. or M4 holes 13 900.3 100 max. 350.2 178 Weight: approx. 400 g G3NE G3NE Precautions Refer to pages 11 to 19 for general precautions Although the LOAD terminals are internally connected to a snubber circuit that absorbs noises, do not wire power lines or high-tension lines with the load connecting lines of the G3NE in the same conduit or the G3NE may be damaged or malfunction. Because the operation time of the G3NE is extremely short, take measures to suppress noise induced between the INPUT terminals. If generation of strong noise is expected, connect an external noise absorber such as an RC circuit. + R C Input SSR - Do not apply excessive force to the terminals. Exercise care when pulling or inserting the terminal clips. When attaching a heat sink to the G3NE, apply heat conductive grease on the heat sink. Tighten the mounting screws of the heat sink with a torque of 0.59 to 0.98 N S m. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. K062-E1-2A 179