Data Sheet NE5550979A R09DS0031EJ0100 Rev.1.00 Nov 25, 2011 Silicon Power LDMOS FET FEATURES * * * * * High Output Power : Pout = 39.5 dBm TYP. (VDS = 7.5 V, IDset = 200 mA, f = 460 MHz, Pin = 25 dBm) High power added efficiency : add = 66% TYP. (VDS = 7.5 V, IDset = 200 mA, f = 460 MHz, Pin = 25 dBm) High Linear gain : GL = 22 dB TYP. (VDS = 7.5 V, IDset = 200 mA, f = 460 MHz, Pin = 10 dBm) High ESD tolerance : ESD tolerance > 8 kV (IEC61000-4-2, Contact discharge) Suitable for VHF to UHF-BAND Class-AB power amplifier. APPLICATIONS * 150 MHz Band Radio System * 460 MHz Band Radio System * 900 MHz Band Radio System ORDERING INFORMATION Part Number NE5550979A Order Number NE5550979A-AZ NE5550979A-T1 NE5550979A-T1-AZ Package 79A (Pb Free) Marking W6 Supplying Form * 12 mm wide embossed taping * Gate pin faces the perforation side of the tape * * * * * * 12 mm wide embossed taping Gate pin faces the perforation side of the tape Qty 1 kpcs/reel NE5550979A-T1A NE5550979A-T1A-AZ 12 mm wide embossed taping Gate pin faces the perforation side of the tape Qty 5 kpcs/reel Remark To order evaluation samples, please contact your nearby sales office. Part number for sample order: NE5550979A ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Operation in excess of any one of these parameters may result in permanent damage. Parameter Drain to Source Voltage Gate to Source Voltage Drain Current Total Power Dissipation Note Channel Temperature Storage Temperature Note: Symbol VDS VGS IDS Ptot Ratings 30 6.0 3.0 25 Unit V V A W Tch Tstg 150 -55 to +150 C C Value at TC = 25C CAUTION Observe precautions when handling because these devices are sensitive to electrostatic discharge. R09DS0031EJ0100 Rev.1.00 Nov 25, 2011 Page 1 of 8 NE5550979A RECOMMENDED OPERATING RANGE (TA = 25C) Parameter Drain to Source Voltage Gate to Source Voltage Drain Current Input Power Symbol VDS VGS IDS Pin Test Conditions f = 460 MHz, VDS = 7.5 V MIN. - 1.65 - - TYP. 7.5 2.20 1.7 25 MAX. 9.0 2.85 - 30 Unit V V A dBm ELECTRICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) Parameter DC Characteristics Gate to Source Leakage Current Drain to Source Leakage Current (Zero Gate Voltage Drain Current) Gate Threshold Voltage Drain to Source Breakdown Voltage Transconductance Thermal Resistance RF Characteristics Output Power Drain Current Power Drain Efficiency Power Added Efficiency Linear Gain Output Power Drain Current Power Drain Efficiency Power Added Efficiency Linear Gain Output Power Drain Current Power Drain Efficiency Power Added Efficiency Linear Gain Symbol IGSS IDSS Vth BVDSS Gm Rth Pout IDS d add GL Note 1 Pout IDS d add GL Note 2 Pout IDS d add GL Note 1 Test Conditions MIN. TYP. MAX. Unit - - - - 100 10 nA A VDS = 7.5 V, IDS = 1.0 mA IDS = 10 A VDS = 7.5 V, IDS = 700100 mA Channel to Case 1.15 25 1.8 - 1.65 37 2.2 5.0 2.25 - 2.9 - V V S C/W f = 460 MHz, VDS = 7.5 V, Pin = 25 dBm, IDset = 200 mA (RF OFF) 38.5 - - - - - - - - - - - - - - 39.5 1.70 68 66 22.0 39.6 1.60 75 73 25.0 38.6 1.76 55 52 16.0 - - - - - - - - - - - - - - - dBm A % % dB dBm A % % dB dBm A % % dB VGS = 6.0 V VDS = 25 V f = 157 MHz, VDS = 7.5 V, Pin = 23 dBm, IDset = 200 mA (RF OFF) f = 900 MHz, VDS = 7.5 V, Pin = 27 dBm, IDset = 200 mA (RF OFF) Note 1 : Pin = 10 dBm Note 2 : Pin = 5 dBm Remark DC performance is 100% testing. RF performance is testing several samples per wafer. Wafer rejection criteria for standard devices is 1 reject for several samples. R09DS0031EJ0100 Rev.1.00 Nov 25, 2011 Page 2 of 8 NE5550979A TEST CIRCUIT SCHEMATIC FOR 460 MHz VGS VDS R1 C1 L1 C1 IN 50 OUT C10 50 C22 C11 C12 FET NE5550979A (WS) C20 C21 COMPONENTS OF TEST CIRCUIT FOR MEASURING ELECTRICAL CHARACTERISTICS Symbol C1 C10 C11 Value 1F 100 pF 24 pF Type GRM31CR72A105KA01B GRM1882C1H101JA01 ATC100A240JW Maker Murata Murata C12 2.4 pF ATC100A2R4BW American Technical Ceramics C20 27 pF ATC100A270JW American Technical Ceramics C21 1.8 pF ATC100A1R8BW American Technical Ceramics C22 100 pF ATC100A101JW R1 4.7 k L1 PCB SMA Connecter 123 nH - - 1/10 W Chip Resistor SSM_RG1608PB472 0.5 mm, D = 3 mm, 10 Turns R4775, t = 0.4 mm, r = 4.5, size = 30 x 48 mm WAKA 01K0790-20 American Technical Ceramics SSM American Technical Ceramics Ohesangyou Panasonic WAKA COMPONENT LAYOUT OF TEST CIRCUIT FOR 460 MHz C1 C1 L1 C12 C20 C21 R1 C11 C10 R09DS0031EJ0100 Rev.1.00 Nov 25, 2011 C22 Page 3 of 8 NE5550979A TYPICAL CHARACTERISTICS 1 (TA = 25C) R: f = 460MHz, VDS = 3.6/4.5/6/7.5/8.4/9 V, IDset = 200 mA, Pin = 0 to 32 dBm IM: f1 = 460MHz, f2 = 461 MHz, VDS = 3.6/4.5/6/7.5/8.4/9 V, IDset = 200mA, Pout (2 tone) = 12 to 38 dBm POWER GAIN, POWER ADDED EFFICIENCY vs. INPUT POWER 40 Output Power Pout (dBm) 35 4.5 30 3.5 3.0 25 2.5 20 2.0 15 1.5 10 1.0 5 0.5 0 5 35 4.0 30 0 -5 40 10 15 20 25 30 Power Gain GP (dB) 45 5.0 Pout - 3.6 V Pout - 4.5 V Pout - 6.0 V Pout - 7.5 V Pout - 9 V IDS - 3.6 V IDS - 4.5 V IDS - 6.0 V IDS - 7.5 V IDS - 9 V Drain Current IDS (A) 50 0.0 35 25 15 30 10 20 5 10 0 5 2f0 - 3.6 V 2f0 - 4.5 V 2f0 - 6.0 V 2f0 - 7.5 V 3f0 - 3.6 V 3f0 - 4.5 V 3f0 - 6.0 V 3f0 - 7.5 V 2f0 - 9 V 3f0 - 9 V -40 -50 -60 15 20 25 30 35 10 15 20 25 0 35 30 IM3/IM5 vs. 2 TONES OUTPUT POWER 0 -30 -70 10 50 Input Power Pin (dBm) 3rd/5th Order Intermodulation Distortion IM3/IM5 (dBc) 2nd Harmonics 2f0 (dBc) 3rd Harmonics 3f0 (dBc) -20 60 40 0 -5 2f0, 3f0 vs. OUTPUT POWER -10 70 20 Input Power Pin (dBm) 0 80 Gp - 3.6 V Gp - 4.5 V Gp - 6 V Gp - 7.5 V Gp - 9 V add - 3.6 V add - 4.5 V add - 6.0 V add - 7.5 V add - 9 V Power Added Efficiency add (%) OUTPUT POWER, DRAIN CURRENT vs. INPUT POWER 40 45 Output Power Pout (dBm) -10 -20 IM3 - 3.6 V IM3 - 4.5 V IM3 - 6 V IM3 - 7.5 V IM5 - 3.6 V IM5 - 4.5 V IM5 - 6.0 V IM5 - 7.5 V IM3 - 9 V IM5 - 9 V -30 -40 -50 -60 -70 10 15 20 25 30 35 40 2 Tones Output Power Pout (2 tone) (dBm) Remark The graphs indicate nominal characteristics. R09DS0031EJ0100 Rev.1.00 Nov 25, 2011 Page 4 of 8 NE5550979A TYPICAL CHARACTERISTICS 2 (TA = 25C) f = 157 MHz, VDS = 3.6/4.5/6/7.5/9 V, IDset = 200 mA, Pin = 0 to 27 dBm POWER GAIN, POWER ADDED EFFICIENCY vs. INPUT POWER OUTPUT POWER, DRAIN CURRENT vs. INPUT POWER Output Power Pout (dBm) 40 4.5 40 4.0 35 35 3.5 30 3.0 25 2.5 20 2.0 IDS - 3.6 V IDS - 4.5 V IDS - 6 V IDS - 7.5 V IDS - 9 V 15 1.0 5 0.5 0 80 Gp - 3.6 V Gp - 4.5 V Gp - 6 V Gp - 7.5 V Gp - 9 V add - 3.6 V add - 4.5 V add - 6 V add - 7.5 V add - 9 V 70 60 25 50 20 40 15 30 10 20 5 10 1.5 10 0 -5 30 Power Gain GP (dB) Pout - 3.6 V Pout - 4.5 V Pout - 6.0 V Pout - 7.5 V Pout - 9 V Drain Current IDS (A) 45 5 10 15 20 25 0.0 30 0 -5 0 5 10 15 20 Power Added Efficiency add (%) R: 0 30 25 Input Power Pin (dBm) Input Power Pin (dBm) TYPICAL CHARACTERISTICS 3 (TA = 25C) RF: f = 900 MHz VDS = 3.6/4.5/6/7.5/9 V, IDset = 200 mA, Pin = 0 to 32 dBm POWER GAIN, POWER ADDED EFFICIENCY vs. INPUT POWER Output Power Pout (dBm) 40 35 4.5 4.0 30 3.5 30 3.0 25 2.5 20 2.0 15 1.5 10 1.0 5 0.5 0 -5 0 5 35 10 15 20 25 30 0.0 35 Input Power Pin (dBm) Power Gain GP (dB) 45 40 5.0 Pout - 3.6 V Pout - 4.5 V Pout - 6.0 V Pout - 7.5 V Pout - 9 V IDS - 3.6 V IDS - 4.5 V IDS - 6.0 V IDS - 7.5 V IDS - 9 V Drain Current IDS (A) 50 25 80 Gp - 3.6 V Gp - 4.5 V Gp - 6 V Gp - 7.5 V Gp - 9 V add - 3.6 V add - 4.5 V add - 6.0 V add - 7.5 V add - 9 V 70 60 50 20 40 15 30 10 20 5 10 0 -5 0 5 10 15 20 25 30 Power Added Efficiency add (%) OUTPUT POWER, DRAIN CURRENT vs. INPUT POWER 0 35 Input Power Pin (dBm) Remark The graphs indicate nominal characteristics. R09DS0031EJ0100 Rev.1.00 Nov 25, 2011 Page 5 of 8 NE5550979A S-PARAMETERS S-parameters and noise parameters are provided on our Web site in a format (S2P) that enables the direct import of the parameters to microwave circuit simulators without the need for keyboard inputs. Click here to download S-parameters. [RF and Microwave] [Device Parameters] URL http://www2.renesas.com/microwave/en/download.html R09DS0031EJ0100 Rev.1.00 Nov 25, 2011 Page 6 of 8 NE5550979A PACKAGE DIMENSIONS 79A (UNIT: mm) Source 1.0 MAX. 0.80.15 W Drain Gate Drain 0.40.15 1.2 MAX. Source 4.4 MAX. 1.50.2 21001 4.2 MAX. 6 Gate 0.60.15 5.7 MAX. (Bottom View) 0.8 MAX. 5.7 MAX. 0.90.2 0.20.1 3.60.2 79A PACKAGE RECOMMENDED P.C.B. LAYOUT (UNIT: mm) 4.0 1.7 Source Stop up the hole with a rosin or something to avoid solder flow. Drain 1.2 0.5 1.0 5.9 Gate Through Hole: 0.2 x 33 0.5 0.5 6.1 R09DS0031EJ0100 Rev.1.00 Nov 25, 2011 Page 7 of 8 NE5550979A RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Infrared Reflow Soldering Conditions Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220C or higher Preheating time at 120 to 180C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) : 260C or below : 10 seconds or less : 60 seconds or less : 12030 seconds : 3 times : 0.2% (Wt.) or below Condition Symbol IR260 Wave Soldering Peak temperature (molten solder temperature) : 260C or below Time at peak temperature : 10 seconds or less Preheating temperature (package surface temperature) : 120C or below Maximum number of flow processes : 1 time Maximum chlorine content of rosin flux (% mass) : 0.2% (Wt.) or below WS260 Partial Heating Peak temperature (terminal temperature) : 350C or below Soldering time (per side of device) : 3 seconds or less Maximum chlorine content of rosin flux (% mass) : 0.2% (Wt.) or below HS350 CAUTION Do not use different soldering methods together (except for partial heating). R09DS0031EJ0100 Rev.1.00 Nov 25, 2011 Page 8 of 8 Revision History Rev. 1.00 Date Nov 25, 2011 NE5550979A Data Sheet Description Summary Page - First edition issued All trademarks and registered trademarks are the property of their respective owners. C-1 Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics 7. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. http://www.renesas.com SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. Renesas Electronics America Inc. 2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A. Tel: +1-408-588-6000, Fax: +1-408-588-6130 Renesas Electronics Canada Limited 1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada Tel: +1-905-898-5441, Fax: +1-905-898-3220 Renesas Electronics Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K Tel: +44-1628-585-100, Fax: +44-1628-585-900 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Dusseldorf, Germany Tel: +49-211-65030, Fax: +49-211-6503-1327 Renesas Electronics (China) Co., Ltd. 7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898 Renesas Electronics Hong Kong Limited Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2886-9318, Fax: +852 2886-9022/9044 Renesas Electronics Taiwan Co., Ltd. 13F, No. 363, Fu Shing North Road, Taipei, Taiwan Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd. 1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632 Tel: +65-6213-0200, Fax: +65-6278-8001 Renesas Electronics Malaysia Sdn.Bhd. Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60-3-7955-9390, Fax: +60-3-7955-9510 Renesas Electronics Korea Co., Ltd. 11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea Tel: +82-2-558-3737, Fax: +82-2-558-5141 (c) 2011 Renesas Electronics Corporation. All rights reserved. Colophon 1.1