Agilent 6030 Series Single-Output, DC Power Supplies 200 W & 1000 W, Autoranging; GPIB Data Sheet This series of 200 watt and 1000 watt DC power supplies take the place of multiple power supplies in your test system by providing maximum power at a variety of operating points. Industry standard SCPI commands and VXIplug&play drivers make system integration easy. Using the serial link, up to 16 power supplies can be connected through one GPIB address. These power supplies have excellent electrical efficiency, making them a good choice for large systems. * Autoranging outputs provide maximum power at a variety of operating voltages * Analog/resistance control of output voltage and current * Series and auto-parallel connections of multiple supplies * Built-in measurements and advanced programmable features * Protection features to ensure DUT safety Autoranging Output V1 Volts P1 P2 V2 V3 P3 I1 I2 Amps I3 Specifications Specifications 6030A (at 0 to 50 unless otherewise specified) 6031A 6032A 6033A 6035A 6038A Number of outputs 1 1 1 1 1 1 GPIB Yes Yes Yes Yes Yes Yes 0 to 200 V 0 to 20 V 0 to 60 V 0 to 20 V 0 to 500 V 0 to 60 V Output ratings Output voltage Output current 0 to 17 A 0 to 120 A 0 to 50 A 0 to 30 A 0 to 5 A 0 to 10 A Maximum power watts 1,200 W 1,064 W 1,200 W 240 W 1,050 W 240 W Auto-ranging output Programming accuracy at 25C 5C Ripple and noise 20 Hz to 20 MHz Readback accuracy at 25C 5C V1, I1 200 V, 5 A 20 V, 50 A 60 V, 17.5 A 20 V, 10 A 500 V, 2 A 60 V, 3.3 A V2, I2 120 V, 10 A 14 V, 76 A 40 V, 30 A 14 V, 17.2 A 350 V, 3 A 40 V, 6 A V3, I3 60 V, 17 A 7 V, 120 A 20 V, 50 A 6.7 V, 30 A 200 V, 5 A 20 V, 10 A Voltage 0.035% +145 mV 0.035% +15 mV 0.035% +40 mV 0.035% +9 mV 0.25% +400 mV 0.035% +40 mV Current 0.2% +25 mA 0.25% +250 mA 0.2% +85 mA 0.15% +20 mA 0.3% +63 mA 0.09% +10 mA Voltage rms p-p 22 mV 50 mV 8 mV 50 mV 8 mV 40 mV 3 mV 30 mV 50 mV 160 mV 3 mV 30 mV Current rms 15 mA 120 mA 25 mA 30 mA 50 mA 5 mA Voltage 0.08% +80 mV 0.08% +7 mV 0.08% +20 mV 0.07% +6 mV 0.5% +200 mV 0.07% +50 mV Current 0.36% +15 mA 0.4% +100 mA 0.36% +35 mA 0.3% +25 mA 0.5% +50 mA 0.2% +11 mA 0.01%+ 5 mV 3 mV 5 mV 2 mV 40 mV 3 mV 0.01% + 10 mA 0.01% + 15 mA 0.01% + 10 mA 0.01% + 9 mA 0.03% + 34 mA 0.01% + 5 mA 2 mV Load regulation Voltage Current Line regulation Voltage 0.01%+ Current Transient response time 10% step change Time Level 5 mV 2 mV 3 mV 1 mV 13 mV 0.01% + 5 mA 0.01% + 25 mA 0.01% + 10 mA 0.01% + 6 mA 0.03% + 17 mA 0.01% + 2 mA 2 ms 150 mV 2 ms 100 mV 2 ms 100 mV 1 ms 50 mV 5 ms 200 mV 7 1 ms 5 mV Supplemental characteristics for all model numbers Supplemental Characteristics Remote sensing: Up to 2 V drop in each lead. Voltage regulation specification met with up to 0.5 V drop, but degrades for greater drops. Programming resolution (at 0 to 50 unless otherwise specified) DC floating voltage either terminal can be grounded or floated from chassis ground Software driver: VXIplug&play AC input current Warranty: One year 2 6031A 6032A 6033A 6035A 6038A (Non-warranted characteristics determined by design and useful in applying the product) Modulation: (analog programming of output voltage and current) Input signal: 0 to 5 V or 0 to 4 k Size: 6030A-32A, 6035A: 425.5 mm W x 132.6 mm H x 503.7 mm D (16.75 in x 5.25 in x 19.83 in). 6033A, 6038A: 212.3 mm W x 177.0 mm H x 516.4 mm D (8.36 in x 6.97 in x 17.87 in). 6030A Weight Voltage 50 mV 5 mV Current 4.25 mA 15 mV 5 mV 125 mV 15 mV 30 mA 12.5 mA 7.5 mA 1.25 mA 2.5 mA 550 V 240 V 240 V 240 V 550 V 240 V 100 VAC 24 A 24 A 24 A 6A 24 A 6A 120 VAC 24 A 24 A 24 A 6.5 A 24 A 6.5 A 220 VAC 15 A 15 A 15 A 3.8 A 15 A 3.8 A 240 VAC 14 A 14 A 14 A 3.6 A 14 A 3.6 A Net 16.3 kg (36 lb) 17.2 kg 16.3 kg (38 lb) (36 lb) 9.6 kg (21 lb) 16.3 kg (36 lb) 9.6 kg (21 lb) Shipping 21.8 kg (48 lb) 22.7 kg 21.8 kg (50 lb) (48 lb) 11.4 kg (25 lb) 21.8 kg (48 lb) 11.4 kg (25 lb) Agilent Models: 6030A, 6031A, 6032A, 6035A Terminal Strip Detail Top VM Screw Size M3.5 x 0.6 IM M VP IP 425 mm 16.75" P B6 B1 +S Does not apply to models 6010A, 6011A, & 6021B -S 2.5 mm 0.1" 421.6 mm 16.6" 12.7 mm 0.5" 132.6 mm 5.2" 128 mm 5.04" Side 77 mm 3.03" Rear 12.7 mm 0.5" Agilent Models: 6033A, 6038A Terminal Strip Detail VM Top 31.8 mm 1.25" IM M VP IP 212.3 mm 8.36" P B6 B1 Screw Size M3.5 x 0.6 Does not apply to model 6023A 19.6 mm 0.77" 208.8 mm 8.22" 421.6 mm 16.6" 177.0 mm 6.97" 170.6 mm 6.72" Rear 13.5 mm 0.53" 16.5 mm 0.65" 22.0 mm 0.87" Side 3 www.agilent.com www.agilent.com/find/6030 For more information on Agilent Technologies' products, applications or services, please contact your local Agilent office. The complete list is available at: Ordering information 6030 Series power supplies ship with product reference CD-ROM including: VXIplug&play drivers, operating manual, service manual, quick start guide, and application notes. Opt 001 Front panel has only line switch, line indicator, and OVP adjust (6030A-33A and 6038A only) Opt 100 87 to 106 VAC, 48 to 63 Hz (power supply output is derated to 75%) Opt 120 104 to 127 VAC, 47 to 63 Hz Opt 220 191 to 233 VAC, 48 to 63 Hz Opt 240 209 to 250 VAC, 48 to 63 Hz Opt 0L1 Printed operating manual (in English) Opt 0B3 Printed service manual (in English) Opt J01 Stabilization for loads up to 10 Henries (not available on 6033A) Accessories 5080-2148 Serial link cable, 2 m (6.6 ft) 1494-0060 Rack slide kit E3663AC Support rails for Agilent rack cabinets For models: 6033A and 6038A: 1CM001A*: Rackmount flange kit 177.0 mm H (4U) - one bracket, one half-module bracket 1CM034A* Rack mount flange kit 177.0 mm H (4U) - two flange brackets and lock link kit for mounting two 6033A or 6038A units side by side. For models: 6030A, 6031A, 6032A, 6035A 1CM003A*: Rackmount flange kit 132.6 mm H (3U) - two flange brackets 1CP002A*: Rackmount flange and handle kit 132.6 mm H (3U) - two brackets and front handles Application notes 10 Hints for Using Your Power Supply to Decrease Test Time, 5968-6359E 10 Practical Tips You Need to Know About Your Power Products, 5965-8239E Agilent DC Power Supplies for Base Station Testing, 5988-2386EN *Support rails required www.agilent.com/find/contactus Agilent Advantage Services is committed to your success throughout your equipment's lifetime. To keep you competitive, we continually invest in tools and processes that speed up calibration and repair and reduce your cost of ownership. You can also use Infoline Web Services to manage equipment and services more effectively. By sharing our measurement and service expertise, we help you create the products that change our world. www.agilent.com/find/advantageservices Agilent Electronic Measurement Group DEKRA Certified ISO 9001:2008 Quality Management Sys System Americas Canada Brazil Mexico United States (877) 894 4414 (11) 4197 3600 01800 5064 800 (800) 829 4444 Asia Pacific Australia China Hong Kong India Japan Korea Malaysia Singapore Taiwan Other AP Countries 1 800 629 485 800 810 0189 800 938 693 1 800 112 929 0120 (421) 345 080 769 0800 1 800 888 848 1 800 375 8100 0800 047 866 (65) 375 8100 www.agilent.com/quality Agilent Email Updates www.agilent.com/find/emailupdates Get the latest information on the products and applications you select. Agilent Channel Partners www.agilent.com/find/channelpartners Get the best of both worlds: Agilent's measurement expertise and product breadth, combined with channel partner convenience. Europe & Middle East Belgium 32 (0) 2 404 93 40 Denmark 45 45 80 12 15 Finland 358 (0) 10 855 2100 France 0825 010 700* *0.125 /minute Germany Ireland Israel Italy Netherlands Spain Sweden United Kingdom 49 (0) 7031 464 6333 1890 924 204 972-3-9288-504/544 39 02 92 60 8484 31 (0) 20 547 2111 34 (91) 631 3300 0200-88 22 55 44 (0) 118 927 6201 For other unlisted countries: www.agilent.com/find/contactus Revised: January 6, 2011 Product specifications and descriptions in this document subject to change without notice. (c) Agilent Technologies, Inc. 2012 Published in USA, July 30, 2012 5990-9297EN