SPEC NO: DSAD1256 REV NO: V.8 DATE: JAN/04/2011 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1202000701
SUBMINIATURE SOLID STATE LAMP
Part Number: AM2520SURCK03 Hyper Red
Features
zSubminiature package.
zGull wing lead.
zLong life - solid state reliability.
zLow package profile.
zMoisture sensitivity level : level 3.
zPackage : 1000pcs / reel.
zRoHS compliant.
Description
The Hyper Red source color devices are made with Al-
GaInP on GaAs substrate Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
5. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAD1256 REV NO: V.8 DATE: JAN/04/2011 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1202000701
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
AM2520SURCK03 Hyper Red (AlGaInP) Water Clear 1500 2400 20°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Hyper Red 650 nm IF=20mA
λD [1] Dominant Wavelength Hyper Red 630 nm IF=20mA
Δλ1/2 Spectral Line Half-width Hyper Red 28 nm IF=20mA
C Capacitance Hyper Red 35 pF VF=0V;f=1MHz
VF [2] Forward Voltage Hyper Red 1.95 2.5 V IF=20mA
IR Reverse Current Hyper Red 10 uA VR=5V
Parameter Hyper Red Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 185 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAD1256 REV NO: V.8 DATE: JAN/04/2011 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1202000701
Hyper Red AM2520SURCK03
SPEC NO: DSAD1256 REV NO: V.8 DATE: JAN/04/2011 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1202000701
AM2520SURCK03
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAD1256 REV NO: V.8 DATE: JAN/04/2011 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1202000701
PACKING & LABEL SPECIFICATIONS AM2520SURCK03