74
86
86 03 180
86 05 250
86 03 300
Plier Wrench: zero backlash under
pressure
Conventional open end wrench: edge
pressure causes surface damage
86 03 300: enormous pressure and a
capacity up to 60 mm/ 2 3/8" allows
application even on large size nuts
The patented Plier Wrench is
a multi functional fastening,
gripping and holding tool
with fast adjustment pushing
a button. The high lever
ratio, parallel jaws without
profile and infinitely variable
adjustment guarantee a
secure and smooth gripping
of the workpiece free
from any backlash.
86 Plier Wrenches, Plier and Wrench in a single tool
왘excellent for gripping, holding,
pressing and bending
workpieces
왘for careful installation of
finished-surface components
왘zero backlash jaw surface
pressure prevents damage to
edges of sensitive components
왘fast adjustment directly on the
workpiece by pushing a button
왘no unintentional shift of the
gripping jaws and no slipping
of the joint
왘replaces a complete set of
spanners
왘parallel jaws allow infinitely
variable gripping of all widths
to the specified maximum size
왘the action of the jaws allows
screwed connections to be
tightened and released quickly
using the ratchet principle
왘lever transmission greater than
10 - 1 for strong gripping
power
왘also for tile breaking
Compressive strain areas when force is
applied on the Plier Wrench 86 03 250
and a conventional open end wrench
Fast adjustment by pushing a buttonWorks using the ratchet principle
Article-No.
9
EAN-
9
Head
9
Handles
9
Working
Length Code Capacities
mm 4003773- Inch mm g
86 03 180 028260 nickel plastic coated 1 3/8 to 35 260
250 022084 plated 1 3/4 to 46 540
300 040224 2 3/8 to 60 725
86 05 180 047162 nickel with two-colour 1 3/8 to 35 280
250 047841 plated dual component handles 1 3/4 to 46 570
compressive
strain
-+
<<
patented
35/46/60 mm
Working on plated fittings without
damage of the surface
