1E1 THRU 1E5 SUPERFAST RECOVERY RECTIFIERS VOLTAGE - 50 to 600 Volts CURRENT - 1.0 Ampere FEATURES l Superfast recovery times-epitaxial construction l Low forward voltage, high current capability R-1 l l Exceeds environmental standards of MIL-S-19500/228 Hermetically sealed l l Low leakage High surge capability l Plastic package has Underwriters Laboratories Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound MECHANICAL DATA Case: Molded plastic, R-1 Terminals: Axial leads, solderable to MIL-STD-202, Method 208 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.0064 ounce, 0.181 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 J ambient temperature unless otherwise specified. Resistive or inductive load, 60 Hz. Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Current .375"(9.5mm) lead length TA=55 J Peak Forward Surge Current IFM(surge): 8.3ms single half sine-wave superimposed on rated load(JEDEC method) Maximum Forward Voltage at 1.0A DC Maximum DC Reverse Current At Rated DC Blocking Voltage Maximum DC Reverse Current at Rated DC Blocking Voltage TA=125 J Maximum Reverse Recovery Time(Note 1) Typical Junction capacitance (Note 2) Operating and Storage Temperature Range TJ 1E1 50 35 50 1E2 100 70 100 NOTES: 1. Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A 2. Measured at 1 MHz and applied reverse voltage of 4.0 VDC 1E2A 150 105 150 1E3 200 140 200 1.0 1E3A 300 210 300 1E4 400 320 400 1E5 600 420 600 30.0 .95 UNITS V V V A A 5.0 1.25 1.7 V g A 150 g A 35.0 17 -55 to +150 PF ns J RATING AND CHARACTERISTIC CURVES FORWARD SURGE CURRENT, AMPERES pk (HALF SINE WAVE) 1E1 THRU 1E5 trr +0.5A 0 -0.25 -1.0 SET TIME BASE FOR 1cm 50 ns/cm Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND MAXIMUM AVERAGE CURRENT RATING SINGLE PHASE, HALF WAVE, 60Hz RESISTIVE OR INDUCTIVE LOAD .375"(9.5mm) LEAD LENGTHS 1.0 .8 .6 .4 .2 0 0 20 40 60 80 120 140 160 AMBIENT TEMPERATURE, J Fig. 3-MAXIMUM AVERAGE FORWARD CURRENT RATING 12 6 1 2 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz 180 10 1E1 1.0 1E3A 0.1 1E5 0.01 TJ = 25J 0.001 0 0.2 0.4 0.6 0.8 1.0 1.2 INSTANTANEOUS FORWARD VOLTAGE VOLTS 1000 Fig. 4-FORWARD CURRENT DERATING CURVE T J = 125J 100 T J = 75J JUNCTION CAPACITANCE, pF IR-REVERSE LEAKAGE CURRENT MICROAMPERES AVERAGE FORWARD RECTIFIED CURRENT AMPERES 1.6 1.2 18 Fig. 2-MAXIMUM NON-REPEITIVE SURGE CURRENT TEST CIRCUIT DIAGRAM 1.4 24 INSTANTANEOUS FORWARD CURRENT AMPERES NOTE:1.Rise Time = 70ns max. Input Impedance = 1 megohm. 22pF 2.Rise Time = 10ns max. Source Impedance = 50 Ohms 30 10 T J = 25J 1.0 0.1 20 40 60 80 100 % OF PIV, VOLTS Fig. 5-TYPICAL REVERSE CHARACTERISTICS 100 TJ = 25J f = 1.0MHz Vsig = 50mVp-p 10 1 0.1 1 10 REVERSE VOLTAGE, VOLTS Fig. 6-TYPICAL JUNCTION CAPACITANCE 100