MW 200W Single Output DC-DC Converter S D 7 2 0 0 series u Features : 2:1 wide input range *Protections: Short circuit / Overload / Over voltage / Over temperature *1500VAC I/O isolation Cooling by free air convection *100% full load burn-in test *24V and 48V input voltage design refer to LVD *2 years warranty FAL cA US (for SD-200C-5/12/24 type only) CBoo: D type only) C SPECIFICATION MODEL SD-200B SD-200C DC VOLTAGE 5V 12V 24V 48V 5V 12V 24V 48V RATED CURRENT 34A 16.7A 8.4A 4.2A 40A 16.7A 8.4A 4.2A CURRENT RANGE 0~34A 0~16.7A 0~8.4A 0~4.2A 0~40A 0~16.7A 0~8.4A 0~4.2A RATED POWER 170W 200.4W 201.6W 201.6W 200W 200.4W 201.6W 201.6W OUTPUT RIPPLE & NOISE (max.) Note.2) 100mVp-p 120mVp-p 150mVp-p 200mVp-p 100mVp-p 120mVp-p 150mVp-p 200mVp-p VOLTAGE ADJ. RANGE 4.5~5.5VDC |11~16VDC | 23~30VDC | 43~53VDC | 45~5.5VDC |11~16VDC | 23~30VDC | 43~53VDC VOLTAGE TOLERANCE Note.3 | +2.0% +1.0% +1.0% +1.0% +2.0% +1.0% +1.0% +1.0% LINE REGULATION +0.5% +0.5% +0.5% 0.5% +0.5% +0.5% 0.5% +0.5% LOAD REGULATION +1.0% +1.0% +1.0% +1.0% +1.0% +1.0% +1.0% +1.0% SETUP, RISE TIME 300ms, 50ms at full load VOLTAGE RANGE B:19 ~ 36VDC C:36 ~ 72VDC D:72 ~144VDC INPUT EFFICIENCY (Typ.) 79% 82% 85% 86% 81% 84% 86% 86% DC CURRENT (Typ.) 10.8A/24V 10.6A/24V 10.4A/24V 10.4A/24V 5.4A/48V 5.2A/48V 6.7A/48V 5A/48V INRUSH CURRENT (Typ.) C:45A/48VDC D:45A/96VDC 105 ~ 135% rated output power ea Protection type : Shut down o/p voltage, re-power on to recover PROTECTION 5.75~6.75V |16.8~20V |31.5~37.5V [53~65V 5.75~6.75V |16.8~20V |31.5~37.5V_ |53~65V OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. -20 ~ +60C (Refer to "Derating Curve") WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT | STORAGE TEMP., HUMIDITY | -40 ~ +85C, 10 ~ 95% RH TEMP. COEFFICIENT +0.03%/C (0 ~ 50C) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1approved (for SD-200C-24 type only), IEC60950-1 CB approved by TUV (for D type only), EAC TP TC 004 approved SAFETY & | WITHSTAND VOLTAGE I/P-O/P:1.5KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C/ 70% RH (Note 4) EMC EMISSION Compliance to EN55032 (CISPR32) Class B, EAC TP TC 020 EMC IMMUNITY Compliance to EN61000-4-2,3,4,6,8, light industry level, criteriaA, EAC TP TC 020 MTBF 218.2K hrs min. _ MIL-HDBK-217F (25C) OTHERS | DIMENSION 215*115*50mm (L*W*H) PACKING 1.1Kg; 12pces/14.4Kg/0.92CUFT NOTE 1. All parameters NOT specially mentioned are measured at 24,48,96VDC input, rated load and 25C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http:/Awww.meanwell.com) 5.The ambient temperature derating of 3.5C/1000m with fanless models and of 5C/1000m with fan models for operating altitude higher than 2000m(6500ft). File Name:SD-200-SPEC 2019-04-18MW 200W Single Output DC-DC Converter S D 7 2 0 0 series u Features : 2:1 wide input range *Protections: Short circuit / Overload / Over voltage / Over temperature *1500VAC I/O isolation Cooling by free air convection *100% full load burn-in test *24V and 48V input voltage design refer to LVD *2 years warranty SPECIFICATION EAL CB toro ype only) C E MODEL $D-200D DC VOLTAGE 5V 12V 24V 48V RATED CURRENT 40A 16.7A 8.4A 4.2A CURRENT RANGE 0~40A 0~16.7A 0~8.4A 0~4.2A RATED POWER 200W 200.4W 201.6W 201.6W OUTPUT RIPPLE & NOISE (max.) Note.2) 100mVp-p 120mVp-p 150mVp-p 200mVp-p VOLTAGE ADJ. RANGE 4.5 ~5.5VDC 11 ~ 16VDC 23 ~ 30VDC 43 ~ 53VDC VOLTAGE TOLERANCE Note.3 | +2.0% +1.0% +1.0% +1.0% LINE REGULATION +0.5% +0.5% +0.5% +0.5% LOAD REGULATION +1.0% +1.0% +1.0% +1.0% SETUP, RISE TIME 300ms, 50ms at full load VOLTAGE RANGE B:19 ~ 36VDC C:36 ~ 72VDC D:72 ~144VDC INPUT EFFICIENCY (Typ.) 82% 82% 84% 90% DC CURRENT (Typ.) 3.5A/96V 3.5A/96V 3.5A/96V 3.5A/96V INRUSH CURRENT (Typ.) C:45A/48VDC D:45A/96VDC 105 ~ 135% rated output power ea Protection type : Shut down o/p voltage, re-power on to recover PROTECTION 5.75 ~ 6.75V 16.8 ~ 20V 31.5 ~ 37.5V 53 ~ 65V OVER VOLTAGE Protection type : Shut down o/p [168 re-power on to recover OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. -20 ~ +60C (Refer to "Derating Curve") WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT | STORAGE TEMP., HUMIDITY | -40 ~ +85C, 10 ~ 95% RH TEMP. COEFFICIENT +0.03%/C (0 ~ 50C) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS IEC60950-1 CB approved by TUV (for D type only), EAC TP TC 004 approved SAFETY 8, | WITHSTAND VOLTAGE I/P-O/P:1.5KVAC I/P-FG:2KVAC O/P-FG:0.5K VAC EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C/ 70% RH (Note 4) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EAC TP TC 020 EMC IMMUNITY Compliance to EN61000-4-2,3,4,6,8, light industry level, criteriaA, EAC TP TC 020 MTBF 218.2K hrs min. MIL-HDBK-217F (25C) OTHERS | DIMENSION 215*115*50mm (L*W*H) PACKING 1.1Kg; 12pces/14.4Kg/0.92CUFT NOTE 1. All parameters NOT specially mentioned are measured at 24,48,96VDC input, rated load and 25C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http:/Awww.meanwell.com) 5.The ambient temperature derating of 3.5C/1000m with fanless models and of 5C/1000m with fan models for operating altitude higher than 2000m(6500ft). File Name:SD-200-SPEC 2019-04-18MW MEAN WELL SD-200 series 200W Single Output DC-DC Converter i Mechanical Specification Case No.912H Unit:mm 117.5 32.5 150 27.5 177.5 19 qo74 ca7 LED ian am Ko | @------+- - -,- 6+, +vaDs.r 9 | qd] [B9 i ! q@| [ps8 \ | wy dq) |p7 Vt I \ elo <ars | | | iiFs| 2 5 rt ! 1 a ~ b4@_l 4-M4 L=5mm | | gocapps OT b2 | 6-M3 L=3mm | . 3B b1 A = = = = e - - Cat? aio biel Cry USP 15, 215 32.5 150 | T . . . . 413 max. 5 oe 5 Terminal Pin No. Assignment : PinNo. | Assignment | PinNo. | Assignment WwW) oS | 0 | a, | 1 DCINPUTV+ | 4,5,6 | DC OUTPUT V- { 3 ---ll 2 DC INPUT V- 7,8,9 |DC OUTPUT V+ [------- ANDAAA ANA ANA ANP ANNAN DAN... 3 Fo = Hi Block Diagram fosc : 100KHz vp o| _EMl POWER 3 FY RECTIFIERS o 4 FILTER SWITCHING FILTER T ov FG oO 3 : O.V.P. [ ovr. | PWM __| P, Ly |__| DETECTION |_| CONTROL CIRCUIT Hi Derating Curve Hi Static Characteristics 400+ others 4 100 | 90 7 80 7 / 80 + J SD-200B,C,D-5 L : SD-200B-12 = SD-200B-24 SS 60+ 1 ao |, SD-200B-48 1 oO S <x so} | g g 207 4 40 |. | 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -20 0 10 20 30 40 50 60 (HORIZONTAL) B:19 24 36 C:36 48 72 D:72 96 144 AMBIENT TEMPERATURE (C) INPUT VOLTAGE (V) File Name:SD-200-SPEC 2019-04-18