VCUT05D1-SD0 www.vishay.com Vishay Semiconductors Bidirectional Symmetrical (BiSy) Single Line ESD-Protection Diode in Silicon Package FEATURES * Ultra compact CLP0603 package * Low package height < 0.3 mm 0.27 * 1-line ESD-protection * Working range 5.5 V * Low leakage current < 0.1 A 22543 * Low load capacitance CD = 10 pF 0.6 0.3 * ESD-protection acc. IEC 61000-4-2 30 kV contact discharge 30 kV air discharge 22544 * Lead plating: Au (e4) MARKING (example only) 1 * Lead material: TiNiAg XY * e4 - precious metal (e.g. Ag, Au, NiPd, NiPdAu) (no Sn) * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 22454 1 = Year code Open circle = Month code and pin 1 XY = Type code ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL (8 mm TAPE ON 7" REEL) MINIMUM ORDER QUANTITY VCUT05D1-SD0 VCUT05D1-SD0-G4-08 15 000 15 000 PACKAGE DATA DEVICE NAME PACKAGE NAME VCUT05D1-SD0 CLP0603 TYPE MOLDING COMPOUND WEIGHT FLAMMABILITY RATING CODE D1 0.12 mg UL 94 V-0 MOISTURE SENSITIVITY LEVEL SOLDERING CONDITIONS MSL level 1 (according J-STD-020) 260 C/10 s at terminals Reflow soldering according JEDEC STD-020 ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT Peak pulse current acc. IEC 61000-4-5, 8/20 s/single shot IPPM 6 A Peak pulse power Pin 1 to pin 2 acc. IEC 61000-4-5; tp = 8/20 s; single shot PPP 78 W ESD immunity Operating temperature Storage temperature Rev. 1.1, 04-Jun-12 Contact discharge acc. IEC61000-4-2; 10 pulses Air discharge acc. IEC61000-4-2; 10 pulses Junction temperature VESD 30 30 kV TJ - 55 to + 145 C Tstg - 55 to + 150 C Document Number: 83443 1 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VCUT05D1-SD0 www.vishay.com Vishay Semiconductors CUT THE SPIKES WITH VCUT05D1-SD0 The VCUT05D1-SD0 is a Bidirectional and Symmetrical (BiSy) ESD-protection device which clamps positive and negative overvoltage transients to ground. Connected between the signal or data line and the ground the VCUT05D1-SD0 offers a high isolation (low leakage current, low capacitance) within the specified working range. Due to the short leads and small package size of the tiny CLP0603 package the line inductance is very low, so that fast transients like and ESD-strike can be clamped with minimal over- or undershoots. ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Number of lines which can be protected Nlines - - 1 lines Max. reverse working voltage VRWM - - 5.5 V Reverse voltage at IR = 0.1 A VR 5.5 - - V Reverse current at VRWM = 5.5 V IR - - 0.1 A at IR = 1 mA VBR 6.5 8 9 V at IPP = 1 A VC - 8.8 10 V Protection paths Reverse stand-off voltage Reverse breakdown voltage Reverse clamping voltage Capacitance at IPP = IPPM = 6 A VC - 11 13 V at VR = 0 V; f = 1 MHz CD - 10 13 pF at VR = 2.5 V; f = 1 MHz CD - 8.5 - pF TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 12 120 % f = 1 MHz Rise time = 0.7 ns to 1 ns 80 % 8 CD (pF) 10 Discharge Current IESD 100 % 60 % 53 % 6 4 40 % 27 % 2 20 % 0 0% - 10 0 10 20 30 40 50 60 70 80 90 100 0 Fig. 1 - ESD Discharge Current Wave Form acc. IEC 61000-4-2 (330 /150 pF) 2 3 4 5 6 7 VR (V) Fig. 3 - Typical Capacitance CD vs. Reverse Voltage VR 9 8 s to 100 % 100 % 1 22546 Time (ns) 20557 8 7 80 % 6 VR (V) IPPM 60 % 20 s to 50 % 40 % 5 4 3 20 % 2 1 0% 0 20548 10 20 30 Time (s) Fig. 2 - 8/20 s Peak Pulse Current Wave Form acc. IEC 61000-4-5 Rev. 1.1, 04-Jun-12 0 10-2 40 22547 10-1 1 101 102 103 104 IR (A) Fig. 4 - Typical Reverse Voltage VR vs. Reverse Current IR Document Number: 83443 2 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VCUT05D1-SD0 www.vishay.com Vishay Semiconductors 30 12 10 20 8 10 VC-ESD (V) VC in (V) Acc. IEC 61000-4-2 contact discharge 6 VC 4 0 VC-ESD - 10 30 ns - 20 2 Measured acc. to IEC 61000-4-5 (8 s/12 s - wave form) 0 0 22548 1 2 3 4 5 - 30 6 0 7 IPP in (A) Fig. 5 - Typical Peak Clamping Voltage VC vs. Peak Pulse Current IPP 22571 5 10 15 20 25 30 VESD (kV) Fig. 8 - Typical Clamping Performance at 8 kV Contact Discharge acc. IEC 61000-4-2 10 5 0 Acc. IEC 61000-4-2 - 8 kV contact discharge VC-ESD (V) -5 - 10 - 15 - 20 - 25 - 30 - 35 - 40 - 45 - 10 0 22569 10 20 30 40 50 60 70 80 90 t (ns) Fig. 6 - Typical Clamping Performance at 8 kV Contact Discharge acc. IEC 61000-4-2 40 35 30 Acc. IEC 61000-4-2 + 8 kV contact discharge VC-ESD (V) 25 20 15 10 5 0 -5 - 10 - 10 0 22570 10 20 30 40 50 60 70 80 90 t (ns) Fig. 7 - Typical Clamping Performance at 8 kV Contact Discharge acc. IEC 61000-4-2 Rev. 1.1, 04-Jun-12 Document Number: 83443 3 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VCUT05D1-SD0 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (mils): CLP0603-2L Package = Chip dimensions in mm e1 b L D A A1 e Millimeters nom. max. min. nom. max. 0.24 0.27 0.30 9.44 10.63 11.81 b 0.22 0.25 0.28 8.66 9.84 11.02 D 0.27 0.30 0.33 10.62 11.81 12.99 E 0.57 0.60 0.63 22.44 23.62 24.80 A E mils min. A1 0.02 e 0.79 0.40 e1 15.75 0.25 L 0.12 0.15 9.84 0.18 4.72 5.91 7.09 foot print recommendation: Soldering mask opening 0.05 0.75 0.3 0.05 solder pad 0.28 0.28 22606 2 terminal leadless package (CLP0603-2L) Document no.: S8-V-3906.04-023 (4) Created - Date: 22. Nov. 2010 Rev.3 - Date: 14. Sept. 2011 Rev. 1.1, 04-Jun-12 Document Number: 83443 4 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VCUT05D1-SD0 www.vishay.com Vishay Semiconductors CARRIER TAPE in millimeters: CLP0603 A-A max . 2 O 0.2 0.05 0.2 0.02 0.670.03 4 0.1 Section + 0.3 8 - 0.1 A 3.5 0.05 O 1.55 0.05 1.75 0.1 2 0.05 B B A B-B 0.33 0.03 Section 5 0.37 0.03 Cummulative tolerances of 10 sprocket holes is +/-0.2mm 22591 TM Carrier tape SiPack 0603 Document no. S8-V-3906.04-0025 (4) Created - Date: 22. Nov. 2010 ORIENTATION IN CARRIER CLP0603 Unreeling direction DETAIL A 50:1 Pin 1 A CLP0603 Top view 22607 Orientation in Carrier Tape (CLP0603) S8-V-3906.04-026 (4) 22.10.2010 Rev. 1.1, 04-Jun-12 Document Number: 83443 5 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000