Omron A5 Catalogue 2007 915-1072 12/9/06 10:05 am Page 1042 D-Sub Connectors - XM3-L/XM2-L/XM4K/XM4L Text The D-sub Connector Series Enters a New Era with Lead-free Products. Determine anchor screw diameters at a glance. Greatly simplified anchor combinations. Shielded against EMI. EMI/RFI shielded hoods available. Connectors Classification D-sub Connectors Model Type XM3B-L XM2C-L XM2E-L XM2F-L Sockets with Right-angle DIP Terminals Plugs with Right-angle DIP Terminals Plugs with Straight DIP Terminals Sockets with Straight DIP Terminals Appearance Classification High-density D-sub Connectors Model Type XM4K XM4L Plugs with Right-angle DIP Terminals Sockets with Right-angle Sockets with Straight DIP DIP Terminals Terminals Appearance Ratings and Characteristics Rated current 3 A (at 20C) Rated voltage 300 VAC Contact resistance 20 m max. (at 20 mV, 100 mA max.) Insulation resistance 1,000 M min. (at 500 VDC for 1 min) Withstand voltage 1,000 VAC for 1 min (leakage current: 1 mA max.) Insertion durability 100 times Operating temperature - 25 to 105C (with no icing at low temperature) Materials Housing Socket contact Plug contact Shell Anchors Lock Pin Grounding Fixture 1042 XM4L Fiber-glass reinforced PBT resin (UL94V-0)/black Phosphor bronze Brass Steel Brass Brass Anchors XM4Z Anchor 2 or 3 Omron A5 Catalogue 2007 915-1072 12/9/06 10:05 am Page 1043 Text D-Sub Connectors - XM3-L/XM2-L/XM4K/XM4L Finish Contact Mating end Terminal Shell Anchors Grounding Fixture Nickel base, flash gold plated Nickel base, flash gold plated Nickel plated Nickel plated Nickel plated Tin plated Straight Right angle Ordering Information D-sub Sockets with Right-angle DIP Terminals Appearance Accessories No. of contacts No anchors Anchor 2 (XM4Z-0011) M2.6 x 0.45 Anchor 2 (XM4Z-0013) #4-40 UNC 9 XM3B-0942-502L XM3B-0942-112L XM3B-0942-132L 15 XM3B-1542-502L XM3B-1542-112L XM3B-1542-132L 25 XM3B-2542-502L XM3B-2542-112L XM3B-2542-132L D-sub Plugs with Right-angle DIP Terminals Appearance Accessories No. of contacts No anchors Anchor 2 (XM4Z-0011) M2.6 x 0.45 Anchor 2 (XM4Z-0013) #4-40 UNC 9 XM2C-0942-502L XM2C-0942-112L XM2C-0942-132L 15 XM2C-1542-502L XM2C-1542-112L XM2C-1542-132L 25 XM2C-2542-502L XM2C-2542-112L XM2C-2542-132L D-sub Plugs with Straight DIP Terminals Appearance Accessories No. of contacts Without ground pins No anchors Anchor 2 (XM4Z-1011) M2.6 x 0.45 Anchor 2 (XM4Z-1013) #4-40 UNC 9 XM2E-0940-L XM2E-0940-502L XM2E-0940-112L XM2E-0940-132L 15 XM2E-1540-L XM2E-1540-502L XM2E-1540-112L XM2E-1540-132L 25 XM2E-2540-L XM2E-2540-502L XM2E-2540-112L XM2E-2540-132L Connectors D-sub Plugs with Straight DIP Terminals Appearance Accessories No. of contacts Without ground pins No anchors Anchor 2 (XM4Z-1011) M2.6 x 0.45 Anchor 2 (XM4Z-1013) #4-40 UNC 9 XM2E-0940-L XM2E-0940-502L XM2E-0940-112L XM2E-0940-132L 15 XM2E-1540-L XM2E-1540-502L XM2E-1540-112L XM2E-1540-132L 25 XM2E-2540-L XM2E-2540-502L XM2E-2540-112L XM2E-2540-132L Note: For other models with Anchors, contact your OMRON representative. 1043 Omron A5 Catalogue 2007 915-1072 12/9/06 10:05 am Page 1044 D-Sub Connectors - XM3-L/XM2-L/XM4K/XM4L Text High-density D-sub Plugs with Right-angle DIP Terminals Appearance Accessories No. of contacts 15 No anchors XM4K-1542-502 Anchor 2 (XM4Z-0011) M2.6 x 0.45 Anchor 2 (XM4Z-0013) #4-40 UNC XM4K-1542-112 XM4K-1542-132 High-density D-sub Sockets with Right-angle DIP Terminals Appearance Accessories No. of contacts 15 No anchors XM4L-1542-502 Anchor 2 (XM4Z-0011) M2.6 x 0.45 Anchor 2 (XM4Z-0013) #4-40 UNC XM4L-1542-112 XM4L-1542-132 High-density D-sub Sockets with Right-angle DIP Terminals Appearance Accessories No. of contacts 15 No anchors XM4L-1541-501 Anchor 2 (XM4Z-0011) M2.6 x 0.45 Anchor 2 (XM4Z-0013) #4-40 UNC XM4L-1541-112 XM4L-1541-132 Note: For other models with Anchors, contact your OMRON representative. Anchor 2 (Screw Head Length: 5.8 mm) Type For right-angle DIP terminals For straight DIP terminals Appearance Lock screw M2.6 x 0.45 M3 x 0.5 #4-40 UNC M2.6 x 0.45 M3 x 0.5 #4-40 UNC Model XM4Z-0021 XM4Z-0022 XM4Z-0023 XM4Z-1021 XM4Z-1022 XM4Z-1023 Anchor 3 (Screw Head Length: 4.8 mm) Type For right-angle DIP terminals For straight DIP terminals Appearance Lock screw M2.6 x 0.45 M3 x 0.5 #4-40 UNC M2.6 x 0.45 M3 x 0.5 #4-40 UNC Model XM4Z-0021 XM4Z-0022 XM4Z-0023 XM4Z-1021 XM4Z-1022 XM4Z-1023 1044 Omron A5 Catalogue 2007 915-1072 12/9/06 10:05 am Page 1045 Text D-Sub Connectors - XM3-L/XM2-L/XM4K/XM4L Dimensions D-sub Sockets with Right-angle DIP Terminals Mounting holes (t = 1.6 mm, bottom view) A B C XM3B-0942-132L XM3B-1542-132L XM3B-2542-132L Board edge 2.77 #4-40 UNC Two, 3.050.1 dia. 2.84 N, 10.1 dia. 8.10.1 2.840.1 7.9 D0.1 2.770.1 B0.1 (3.9) 1.6 5.8 5.8 18.4 8.1 2.84 3.18 No. of contacts (N) A B C D 9 30.8 24.99 16.33 6.96 15 39.1 33.32 24.66 6.96 25 53.0 47.04 38.38 6.91 D-sub Plugs with Right-angle DIP Terminals Mounting holes (t = 1.6 mm, bottom view) A B C XM2C-0942-132L XM2C-1542-132L XM2C-2542-132L Board edge #4-40 UNC Two, 3.050.1 dia. 2.84 N, 10.1 dia. 8.10.1 2.840.1 8.3 D0.1 2.770.1 B0.1 (3.9) 1.6 6 5.8 18.6 8.1 2.84 3.18 No. of contacts (N) A B C D 9 30.8 24.99 16.92 6.96 15 39.1 33.32 25.25 6.96 25 53.0 47.04 38.96 6.91 D-sub Plugs with Straight DIP Terminals A B C XM2E-0940-132L XM2E-1540-132L XM2E-2540-132L 2.77 Mounting holes (t = 1.6 mm, bottom view) #4-40 UNC Two, 3.2 +-00.1 dia. N, 10.1 dia. 2.84 2.840.1 8.3 2.770.1 B0.1 12.55 5.8 0.6 dia. D 6.2 7 3.8 3.4 2.84 10.7 No. of contacts (N) A B C D E 9 30.8 24.99 16.92 19.23 6.96 15 39.1 33.32 25.25 27.56 6.96 25 53.0 47.04 38.96 41.28 6.91 1045 Connectors 6 0.35 3.25 E0.1 Omron A5 Catalogue 2007 915-1072 12/9/06 10:05 am Page 1046 D-Sub Connectors - XM3-L/XM2-L/XM4K/XM4L Text D-sub Sockets with Straight DIP Terminals A XM2F-0940-132L XM2F-1540-132L XM2F-2540-132L B C Mounting holes (t = 1.6 mm, bottom view) #4-40 UNC 2.77 0.1 Two, 3.2 + -0 dia. N, 10.1 dia. 2.84 2.840.1 7.9 12.55 5.8 E0.1 2.770.1 B0.1 5.8 0343 0.35 6.2 7 3.8 3.6 2.84 0.6 dia. D 3.25 10.7 No. of contacts (N) A B C D E 9 30.8 24.99 16.33 19.23 6.96 15 39.1 33.32 24.66 27.56 6.96 25 53.0 47.04 38.38 41.28 6.91 High-density D-sub Plugs with Right-angle DIP Terminals 30.8 XM4K-1542-132 Mounting holes (t = 1.6 mm, bottom view) 24.99 16.92 1.145 Board edge #4-40 UNC 0.25 2.290.1 1.98 7.670.1 8.890.1 Two, 3.050.1 2.540.1 2.540.1 8.3 1.98 0.25 0.1 Fifteen, n, 1 1.0 + -0 dia. 24.990.1 1.6 12.55 6 5.8 2.54 8.89 22.2 2.54 2.54 3.5 (3.94) High-density D-sub Sockets with Right-angle DIP Terminals XM4L-1542-132 30.8 24.99 16.33 2.29 Mounting holes (t = 1.6 mm, bottom view) Board edge 0.25 #4-40 UNC 1.145 7.670.1 Two, 3.050.1 dia. 1.98 5 10 15 6 11 7.9 2.540.1 2.540.1 1.98 1.6 5.8 12.55 8.89 22.2 2.54 2.54 3.2 (3.94) 15 11 10 6 5 1 0.25 0.1 Fifteen, 1.0 + -0 dia. 24.990.1 5.8 2.54 1046 2.290.1 8.890.1 1.145 1 Omron A5 Catalogue 2007 915-1072 12/9/06 10:05 am Page 1047 Text D-Sub Connectors - XM3-L/XM2-L/XM4K/XM4L High-density D-sub Sockets with Straight DIP Terminals 30.8 24.99 16.33 XM4L-1541-132 2.29 Mounting holes (t = 1.6 mm, bottom view) 0.25 #4-40 UNC 1.145 24.990.1 1.98 1.145 1 6 11 +0.1 dia. Two, 3.2 -0 0.25 1.980.1 1.980.1 7.9 1.98 +0.1 dia. -0 7 12.55 5.8 5.8 0.35 7 6.2 3.8 3.25 3.4 2.8 1.98 0.6 dia. 19.23 3.96 10.7 Anchor 2 Anchor 3 XM4Z-0011 #4-40 UNC #4-40 UNC 4.75 5.8 11.8 4.75 1.4 #4-40 0.4 UNC 5.8 11.8 4.75 #4-40 UNC 0.4 5.8 11.8 4.75 0.4 M3 x 0.5 1.8 4.75 1.4 #4-40 0.4 UNC A min. 0.4 M3 x 0.5 1.3 5.8 10 4.75 5.8 11.8 4.75 5.8 2-R3.2 11.4 min. 6.4 min. 4-R2.5 Note: 1. Two Anchors are required per Connector. 2. Applicable panel thickness is less than 1.2 mm. #4-40 UNC 0.4 2.2 M2.6 x 0.45 4.8 10.0 4.75 4.8 XM4Z-0022 XM4Z-0022 1.4 #4-40 0.4 UNC 1.4 #4-40 0.4 UNC 0.4 M3 x 0.5 1.3 4.8 4.75 1.4 #4-40 0.4 UNC 4.8 11.8 10 XM4Z-0023 XM4Z-0023 #4-40 UNC #4-40 UNC #4-40 UNC 0.4 2.2 11.8 #4-40 UNC #4-40 UNC 4.75 5.8 11.8 #4-40 UNC #4-40 UNC 4.75 4.8 11.8 4.8 10.0 Dimensions: Panel Mounted (Using Anchor 3 or M3 Screws) Dimensions: Not Panel Mounted (Using Anchor 2) 5.8 M2.6 x 0.45 XM4Z-0013 XM4Z-0013 0.4 M3 x 0.5 1.8 4.75 XM4Z-0021 XM4Z-0021 2.7 XM4Z-0012 XM4Z-0012 0.4 M3 x 0.5 1.8 M2.6 x 0.45 No. of contacts (N) A 9 (See note.) 31.0 15 39.4 25 53.3 A0.1 B min. Two, 3.20.1 dia. 11.4 min. Note: 1. The XM4K and XM4L use 9-contact dimensions. No. of contacts (N) A B 9 (See note.) 24.99 20.5 4-R3.4 10 15 33.32 28.8 47.04 42.5 Note: 1. Two Anchors are required 25 per Connector. Note: 1. The XM4K and XM4L use 92. Applicable panel contact thickness is less than 1.2 dimensions. mm. 1047 Connectors XM4Z-0011 Omron A5 Catalogue 2007 915-1072 12/9/06 10:05 am Page 1048 D-Sub Connectors - XM3-L/XM2-L/XM4K/XM4L Text XM2S Hood Covers Dimensions 9-contact Hoods XM2S-0911 (M2.6 x 0.45 metric screws) XM2S-0912 (M3 x 0.5 metric screws) XM2S-0913 (#4-40 UNC inch screws) Max. applicable diameter: 9 dia. 15-, 25- and 37-contact Hoods XM2S-@@11 (M2.6 x 0.45 metric screws ) XM2S-@@12 (M3 x 0.5 metric screws ) XM2S-@@13 (#4-40 UNC inch screws) Max. applicable cable diameter: F dia. Lock screw M2.6 x 0.45 M3 x 0.5 #4-40 UNC Lock screw M2.6 x 0.45 M3 x 0.5 #4-40 UNC Dimensions No. of contacts A B C D E F 15 40.5 33.32 26.5 19 30 10 25 54.0 47.04 40 29 38 11 37 70.5 63.50 57 42 50 13 Ordering Information Applicable Anchors Lock screw M2.6 x 0.45 metric screws M3 x 0.5 metric screws Anchor 1 XM2Z-0001 XM2Z-0002 #4-40 UNC inch screws XM2Z-0003 Anchor 2 XM2Z-0011 XM2Z-0012 XM2Z-0013 Anchor 3 XM2Z-0021 XM2Z-0022 XM2Z-0023 No. of contacts 9 XM2S-0911 XM2S-0912 XM2S-0913 15 XM2S-1511 XM2S-1512 XM2S-1513 25 XM2S-2511 XM2S-2512 XM2S-2513 37 XM2S-3711 XM2S-3712 XM2S-3713 Note: Select D-sub Connectors with Anchors or Grounding Fixtures that fit the lock screw of the Hood. Accessories (Sold Separately) Anchor 5 (For Jackscrews and XM2S Hood) XM2Z-0071 (M2.6 0.45 metric screws) XM2Z-0072 (M3 0.5 metric screws ) XM2Z-0073 (#4-40 UNC inch screws) Model 2.35 dia. 4 dia. Materials and Finish Brass/nickel plated 1048 Dimensions Screw A A XM2Z-0071 M2.6 x 0.45 XM2Z-0072 M3 x 0.5 XM2Z-0073 #4-40 UNC Omron A5 Catalogue 2007 915-1072 12/9/06 10:05 am Page 1049 Text D-Sub Connectors - XM3-L/XM2-L/XM4K/XM4L Precautions Correct Use * Grounding (Lock Pin Grounding Fixture) * To ground, provide copper foil around the Connector Attachment hole on the board, assemble the connector and grounding fixture, and dip in solder as shown below. * Insert the connector into the PCB and then simultaneously dip-solder the connector terminals and lock pin to the board. Lock pin grounding fixture PCB (t = 1.6 mm) Approx. 1.9 * Soldering Automated Soldering Conditions (Jet Flow) 1. Soldering temperature: 250 5C 2. Continuous soldering time: Within 5s * Tightening Torque of Anchor and Grounding Fixture Connectors If the anchor is secured to the connector, be sure to tighten it to a torque of 0.49 N*m. CAT NO. G922-E2-01 1049