126LH Performance Curve 126LJ Performance Curve 126LF Performance Curve
ETRI, Inc. 1503 Rocky River Road North • Monroe, NC 28110 • Tel. 704.289.5423 • Fax 704.283.7170
Part Number Bearings Voltage(VAC) Frequency(Hz) Current(mA) Input(watts) Noise(dBA) Speed(rpm) Airflow(cfm)
126LF-2182-000 Sleeve 115 50/60 130/100 10/8 30/35 2750/3250 27/32
126LF-0182-000 Ball
126LF-2181-000 Sleeve 220 50/60 75/60 12/9 30/35 2750/3250 27/32
126LF-0181-000 Ball
126LJ-2182-000 Sleeve 115 50/60 75/65 7/6 22/25 2000/2400 19/23
126LJ-2181-000 Sleeve 220 50/60 45/40 8/7 22/25 2000/2400 19/23
126LH-2182-000 Sleeve 115 50/60 50/50 5/4 10/11 1350/1550 13/15
126LH-2181-000 Sleeve 220 50/60 35/30 7/6 14/18 1550/1850 14/17
Model 126
AC FANS
Size: 80 mm x 38 mm (3.15” x 1.5”)
9-11, rue de Moulin des Bruyères
92400 Courbevoie FRANCE
Tel: (33-1) 49 04 92 00
Fax: (33-1) 47 89 09 38
1503, Rocky River Road North
Monroe, NC 28110 USA
Tel: 704.289.5423
Fax: 704.283.7170
Website: http://www.etrinet.com Email: sales@etrinet.com
PANEL CUT-OUT
ETRI Model 126 AC FANS
Size: 80 mm x 38 mm (3.15” x 1.5”)
Specifications subject to change without notice.
ETRI fans are available with a wide range
of accessories, from finger guards to filter
assemblies to special termination. Request our accessories brochure or call
your nearest distributor for complete details.
ELECTRICAL SPECIFICATIONS
Item Specification Conditions/Tolerances
Motor type shaded pole 2 pole type
Rated Voltage 115 VAC or 220 VAC ±10%
Frequency 50/60 Hz. Able to operate at either frequency
Input Current At nominal voltage ±10%
Input Power At nominal voltage ±10%
Max air flow / Back pressure All tested in submerged orifice chamber ±4% cfm/±8% pressure
Dielectric strength 2250 VAC 5 sec, 4mA leakage
Electrical Connection 20 awg flying leads 12”
Speed At nominal voltage ±4%
MECHANICAL SPECIFICATIONS
Item Specification Conditions
Life expectancy 50,000 hours continuous operation @ 25°C, 65% relative humidity
Bearing ball bearing/sleeve bearing Use under 70°C/Use under 55°C
Airflow direction air intake over impeller
Housing material Zamak (zinc alloy) single piece die-cast housing
Impeller Lexan 500-10% glass filled UL 94V-0
Weight 0.4 kg. (14 oz)
Rotation clock-wise viewed from impeller
ENVIRONMENTAL SPECIFICATIONS
Item Specification Conditions
Operating temperature -10 to +70°C/-10 to +55°C Ball bearing/Sleeve bearing
Storage temperature -40 to +70°C 6 months max.
Paint Black enamel
Acoustical Anechoic chamber at free air Microphone - 1 meter away
PROTECTION
Item Specification Conditions
Locked rotor impedance protected
Insulation class UL class A
Agency approvals UL, CSA, VDE, CE
Warranty 3 years
ACCESSORIES
