FCN-234D/235D***-ar FCN-237R***-c FCN-235D***-G/E RIGHT-ANGLE, BOARD-SOCKET (SCSI II 50,68 Pos Connector) (RS232-Alt 26 Pos Connector) DIMENSIONS | End contact 5.50 | 10.50 (0.217)| (0.413) 1st Contact 2-56UNC (0.260) | B 2-No. 2-56UNG 0.40 0 _ (0.016) 3.41 (0.134) MOUNTING HOLE LAYOUT 26, 50-Contacts 20, 28, 40, 68-Contacts 1.90520.1 1.905+0.1 Bi0.1 (B0.004) (6.07540.004) B+0.1 (BL0.004) (6.075+0.004) C101 Crt 1.2740.1 (C20.004) (6.138 max) 1.2720.1 {C+0.004) (6-138 max.) (0.050+0.004) (0.050+0.004) 2 L ( (fo ( y CL < = i * ea [ / iP ~ AN x 02.5 . (0.098) Z 81d contact | (20.088) [ ard contact \, (0.420) 1st contact 2nd contact 2nd contact 20.8020.06 ist contact 20.8040.06 (@0.03140.002) (20.031+0.002) Unit: mm in.) PART NUMBERS No. of Part Number Dimensions Contacts Right-Angle A B c D E 20 FCN-235D020-G/E 33.40 (1.315) 27.43 (1.080) 11.43 (0.450) 15.60 (0.614) 23.24 (0.915) 26 FCN-235D026-G/E 37.21 (1.465) 31.24 (1.230) 15.24 (0.600) 19.41 (0.764) 27.05 (1.065) 28 FCN-235D028-G/E 38.48 (1.515) 32.51 (1.280) 16.51 (0.650) 20.68 (0.814) 28.32 (1.115) 40 FCN-235D040-G/E 46.10 (1.815) 40.13 (1.580) 24.13 (0.950) 28.30 (1.114) 35.94 (1.415) 50 FCN-235D050-G/E 52.45 (2.065) 46.48 (1.830) 30.48 (1.200) 34.65 (1.364) 42.29 (1.665) 68 FCN-235D068-G/E 63.88 (2.515) 57.91 (2.280) 41.91 (1.650) 46.08 (1.814) 53.72 (2.115) Note: See recommended panel cut-out in Backshells and Accessories for 230/240 Series. 2-32 Me 3749756 OO1L7beY SHOAugust 1995 Edition 1.0 DATA SHEET <= FCN-234D/235D***.c*, 237R***.c FCN-230R Series SCSI Il I1l,1P! Connectors oO FUJITSU FEATURES Mating contacts have 1.27 mm (0.050 in.) pitch configuration, enabling high density mounting and interface Conforms to the SCSI-Il, SCSI-III specification approved by ANSI (50 and 68 positions) Conforms to Mil/100baseT interface specification (40 position) Conforms to RS-232 Ait (26 position) Conforms to the IPI (intelligent Peripheral Interface) and HSC (High Speed Channel) recommended by ANSI (50,100 pin) e Discrete wire (AWG#28, #30) I/O cable can be assembled by IDC Terminals are arranged in a staggered configuration (1.27 mm x 1.905 mm (0.050 in. x 0.075 in.)) SPECIFICATIONS Operating Temperature Range -55 to +105C Maximum Allowable Current 1 ADC Maximum Aliowable Voltage 240 VAC Contact Resistance 30 mQ max at 6 VDC, 0.1A Insulation Resistance 1000 MQ min at 500 VAC Dielectric Strength 750 VAC for 1 minute Applicable Wire AWG #28 OR #30 (wire diameter: @0.5 to 20.65 mm (0.020 to 0.026) or 20.8 to 20.88 (0.03 to 0.035 in.)) MATERIALS Insulator Polimide Resin (UL94V-0) Conductor Copper alloy Contact Plating Gold over palladium over nickel (PAGOS) 2-28 Mm 3749756 001?be0 IT?