CHP1237 KPCS CDMA InGaP HBT Amplifier Module PRELIMINARY DATA SHEET - Rev 1.5 FEATURES * Small Profile (3 x 3 x 1 mm) * PFTTM 50 Matched Module * High Linearity of -50 dBc * High PAE of 39% * InGaP HBT Technology * Low Quiescent Current of 55 mA * Single Positive Supply Voltage APPLICATIONS * Korean PCS CDMA handsets M12 Package 9 Pin 3 x 3 x 1 mm Surface Mount Module PRODUCT DESCRIPTION bias control circuit. It is packaged in a 3 x 3 x 1 mm package using proprietary Passive-Free Technology (PFT)TM. The package provides excellent electrical stability and low thermal resistance. CHP1237 is an InGaP HBT amplifier module offering high performance for PCS CDMA wireless handsets. It consists of a two-stage amplifier, 50 matching network for both input and output, and a VCC C6 2.7F C5 220pF C4 27pF 9 1 RFIN 2 8 CHP1237 7 3 VREF2 4 5 C7 1nF VREF1 C8 1nF Figure 1: Block Diagram 08/2004 6 RFOUT CHP1237 Table 1: Pad Description 2 PIN NAME DESCRIPTION 1 V CC Supply Voltage 2 RFIN RF Input Signal 3 GND Ground 4 VREF2 Reference Voltage 5 VREF1 Reference Voltage 6 GND Ground 7 GND Ground 8 RFOUT RF Output 9 V CC Supply Voltage PRELIMINARY DATA SHEET - Rev 1.5 08/2004 CHP1237 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PARAMETER MIN MAX UNIT RF Input Power (PIN) - 10 dB m Supply Voltage (VCC) - 6 V Reference Voltage 1 (VREF1) - 3.4 V Reference Voltage 2 (VREF2) - 3.4 V Case Operating Temperature (TC) - 30 100 C Storage Temperature (TSTG) - 55 125 C Soldering Temperature (TS) - 240 C COMMENTS 5 seconds Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges PARAMETER MIN TYP MAX UNIT Operating Frequency (f) 1750 - 1780 MHz Supply Voltage (VCC) +3.2 +3.4 +4.2 V Reference Voltage 1 (VREF1) +2.95 +3.00 +3.05 V Reference Voltage 2 (VREF2) +2.95 +3.00 +3.05 V Operating Temperature (TC) -30 +25 +85 C The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. PRELIMINARY DATA SHEET - Rev 1.5 08/2004 3 CHP1237 Table 4: Electrical Specifications (TC = +25 C, fo = 1765 MHz, VCC = 3.4 V, VREF1 = 3.0 V, VREF2 = 3.0 V, (unless otherwise specified) ) PARAMETER MIN TYP MAX UNIT Gain G Gh 24 25.5 26.5 27.5 28 29.5 dB P O = 16 dB m P O = 28 dB m - - 1.0 dB PO = 28 dBm over frequency 7.5 36 9 39 - % P O = 16 dB m P O = 28 dB m - - 157 515 mA P O = 16 dB m P O = 28 dB m - -52 -50 -49 -47 - -72 -59 -60 -56 Quiescent Current Iqs (Shutdown Mode) Iq (3) 45 1 55 5 60 Noise in Receive Band - -136 -133 Harmonics 2fo 3fo - - -30 -30 dB c P O = 28 dB m P O = 28 dB m Spurious Output Level - - -60 dB c VSWR < 6:1 10:1 - - VSWR P O = 28 dB m Gain Variation Power-Added Efficiency (1) PAE PAEH Total Current (I) Adjacent Channel Power Ratio 1.25 MHz offset ACPR1L ACPR1H 2.25 MHz Offset ACPR2L ACPR2H (2) P O = 16 dB m P O = 28 dB m dB c (4) Ruggedness - no damage COMMENTS (5) P O = 16 dB m P O = 28 dB m mA mA VREF1 = 0 V, VREF2 = 0 V, No RF VREF1 = 3 V, VREF2 = 3 V, No RF dBm/Hz PO = 28 dBm Notes: (1) Includes the current at pins 1, 4, 5, and 9. (2) ACPR is specified per IS95 as the ratio of adjacent power in 30 kHz BW to the total in-band power (1.23 MHz BW). (3) Includes the current at pins 1 and 9 (Vcc current). (4) RxBn is measured at 80 MHz above the operating frequency (Fo). (Measurement setup: RBW = 30 kHz, VBW = 30 kHz). (5) All phases, time equals to 10 seconds. Table 5: Power Mode Truth Table POWER MODE 4 V R E F1 V R E F2 TYPICAL GAIN Shut Down 0V 0V <-40 dB High Power 3V 3V 27.5 dB PRELIMINARY DATA SHEET - Rev 1.5 08/2004 CHP1237 PERFORMANCE DATA Figure 2: ACP1_U vs Po (VCC = 3.4 V, VREF1 = 3.0 V, VREF2 = 3.0 V, F = 1.765 GHz) +25C -40.00 -30C +85C -45.00 ACP1_U (dBc) -50.00 -55.00 -60.00 -65.00 -70.00 0.00 5.00 10.00 15.00 20.00 25.00 30.00 Pout (dBm) Figure 3: ACP2_U vs Po (VCC = 3.4 V, VREF1 = 3.0 V, VREF2 = 3.0 V, F = 1.765 GHz) +25C -50.00 -30C +85C -55.00 ACP2_U (dBc) -60.00 -65.00 -70.00 -75.00 -80.00 0.00 5.00 10.00 15.00 20.00 25.00 30.00 Pout (dBm) Figure 4: PAE vs Po (VCC = 3.4 V, VREF1 = 3.0 V, VREF2 = 3.0 V, F = 1.765 GHz) +25C 50.00 -30C +85C 45.00 40.00 35.00 PAE % 30.00 25.00 20.00 15.00 10.00 5.00 0.00 15.00 17.00 19.00 21.00 23.00 25.00 27.00 29.00 Pout (dBm) PRELIMINARY DATA SHEET - Rev 1.5 08/2004 5 CHP1237 Figure 5: ACP1_U vs VCC (Po = 28 dBm, VREF1 = 3.0 V, VREF2 = 3.0 V) -30.00 1.75GHz, +25C 1.78GHz, +25C 1.75GHz, -30C 1.78GHz, -30C 1.75GHz, +85C 1.78GHz, +85C -35.00 ACP1_U (dBc) -40.00 -45.00 -50.00 -55.00 -60.00 3.20 3.40 3.60 3.80 4.00 4.20 Vcc (V) Figure 6: ACP2_U vs VCC (Po = 28 dBm, VREF1 = 3.0 V, VREF2 = 3.0 V) 1.75MHz, +25C 1.78MHz, +25C -50.00 1.75MHz, -30C 1.78MHz, -30C 1.75MHz, +85C 1.78MHz, +85C -52.00 -54.00 ACP2_U (dBc) -56.00 -58.00 -60.00 -62.00 -64.00 -66.00 -68.00 -70.00 3.20 3.40 3.60 3.80 4.00 4.20 Vcc (V) Figure 7: PAE vs VCC (Po = 28 dBm, VREF1 = 3.0 V, VREF2 = 3.0 V) 1.75GHz, +25C 1.78GHz, +25C 45.00 1.75GHz, -30C 1.78GHz, -30C 1.75GHz, +85C 1.78GHz, +85C 43.00 41.00 39.00 PAE % 37.00 35.00 33.00 31.00 29.00 27.00 25.00 3.20 3.40 3.60 3.80 4.00 Vcc (V) 6 PRELIMINARY DATA SHEET - Rev 1.5 08/2004 4.20 CHP1237 Figure 8: Gain vs POUT (VCC = 3.4 V, VREF1 = 3.0 V, F = 1.765 GHz) +25C 32.00 -30C +85C 31.00 GAIN (dB) 30.00 29.00 28.00 27.00 26.00 25.00 0.00 4.00 8.00 12.00 16.00 20.00 24.00 28.00 Pout (dBm) Figure 9: Gain vs POUT (VCC = 3.4 V, VREF1 = 3.0 V) 1.750 GHz 1.765 GHz 1.780 GHz 30.00 29.00 GAIN (dB) 28.00 27.00 26.00 25.00 -4.00 0.00 4.00 8.00 12.00 16.00 20.00 24.00 28.00 32.00 Pout (dBm) PRELIMINARY DATA SHEET - Rev 1.5 08/2004 7 CHP1237 PACKAGE OUTLINES Figure 10: Package Outline 8 PRELIMINARY DATA SHEET - Rev 1.5 08/2004 CHP1237 NOTES PRELIMINARY DATA SHEET - Rev 1.5 08/2004 9 CHP1237 NOTES 10 PRELIMINARY DATA SHEET - Rev 1.5 08/2004 CHP1237 NOTES PRELIMINARY DATA SHEET - Rev 1.5 08/2004 11 CHP1237 ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com E-mail: Mktg@anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product's formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 12 PRELIMINARY DATA SHEET - Rev 1.5 08/2004