65
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
APPLICATIONS
AIB/GT series connectors are made in accordance with German military specification VG95234 and
MIL-DTL-5015. Originally designed for NATO combat vehicles, aircraft, and airborne equipment, these
rugged connectors are now in a broad range of demanding commercial applications from trucks
to industrial robots.
• Power generators
• Battery systems
• Engines
• Sensors
• Motion control
• Off-road vehicles
• Earth-moving equipment
• Ships
• Railroad equipment
• Mobile equipment
• Industrial machinery
• Telecommunications
• Mass transit
Industrial environments requiring extreme environmental reliability and ease of mating and unmating,
such as:
SIMPLE AND FAST MATING AND UN-MATING
AIB/GT series connectors use a unique “reverse bayonet” coupling system that allows for mating and
un-mating with a simple 120˚ rotation without compromising shock, vibration, or moisture resistance. The
large, open ramps are easily cleaned of mud or other contaminants. The ramp coupling system eliminates
the possibility of cross-threading and thread damage possible with standard MIL-DTL-5015 threaded
connectors. This design is easier to mate in cold weather, tight spaces, or on equipment which must be
disassembled frequently.
SHOCK AND VIBRATION RESISTANCE
AIB/GT series connectors are supplied with military-standard resistant sealing and a three-point bayonet
coupling nut. The three-point bayonet coupling incorporates a wave spring and washer specified by the rail
industry. AIB/GT series connectors pass the most stringent tests of shock and vibration performance while
maintaining proper continuity and water tightness. Rugged aluminum alloy shell and hardware are light in
weight yet highly resistant to damage.
Amphenol AIB/GT Series MIL-DTL-5015
IMPROVED COUPLING OVER THREADED MIL-DTL-5015
The AIB/GT Series replaces the threaded coupling used in MIL-DTL-5015
with a positive, quick-mating, three-point reverse bayonet lock for improved
performance. These Amphenol connectors are an ideal cost-effective option
for applications requiring reliability in harsh environments, and is the world-
standard for rail, mass transit, and military ground vehicle applications.
This series has the same shell dimensions, contact layouts, contacts, and
performance characteristics as the MIL-DTL-5015 threaded connectors;
however, the two series do not intermate. They are sealed to withstand
moisture, condensation, vibration and flash-over. Over 180 contact layouts
are available, in variations that allow for just power, just signal, or a mix of
both contact types.
• Meets NATO specification VG95234
COMMERCIAL &
MILITARY
FEATURES
66
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
AUDIBLE, VISUAL, AND TACTILE CONFIRMATION OF MATING
AIB/GT series connectors provide three independent checks that the connector halves are mated. When
the coupling nut is fully rotated, the three studs snap into the end of the ramps with a loud “click” (audible).
The user can feel the bolts click into the grooves (tactile). Blue dots on the receptacle and coupling nut are
aligned when the connector is properly mated (visual).
ENVIRONMENTAL
The sealing is not compromised by any of the operating conditions defined in MIL-DTL-5015 and is
completely watertight when mated.
BROAD TEMPERATURE RANGE
These connectors will operate in temperatures from -67˚ to +257˚F (-55˚ to +125˚C). High-temperature
and zero-halogen insulators are also available. Contact us for ordering information.
WIDE RANGE OF WIRE GAUGES AND CURRENT-CARRYING CAPABILITY
Up to 150 amps with accommodations for wire gauges from size 26 to size 0 AWG.
WIDE VARIETY OF CONTACTS
High-reliability screw machine contacts with silver or gold plating are available in sizes from 20 to 0
to accommodate wire gauges from 26 to 0 AWG. Solder, crimp, PC, coax, and thermocouple contacts
are available.
AIB/GT connectors use rail industry-standard crimp contacts that are completely interchangeable with other
rail connectors such as Litton/Veam CIR series.
INTERMATEABLE AND INTERMOUNTABLE WITH ALL VG95234 CONNECTORS
The standard MIL-DTL-5015 layouts and dimensions ensure intermateability and intermount ability with
all connectors made in accordance with VG95234.
All AIB/GT connectors are intermountable with standard threaded MIL-DTL-5015 connectors, often
making it possible to upgrade without changing panel cutouts or clearances.
MATERIALS & FINISHES
Shell Aluminum alloy. (Can be grounded)
Plating Olive drab chromate coating over cadmium plating, conductive black alloy,
black alloy, electroless nickel, green zinc, and black anodized
Contacts Copper alloy
Platings Hard silver plating or gold plating
Insulator* Neoprene
Seals Silicone, Neoprene, or Viton®**
*Optional zero-halogen and high-temperature insulators are available. Contact us for information.
**Viton® is a registered trademark of DuPont DOW Elastomers
FEATURES
TECHNICAL
SPECIFICATIONS
67
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
CONTACT SIZE TEST CURRENT (AMPS)
16/16S 13
12 23 (60)*
8 46 (69)*
4 80 (120)*
0 150 (225)*
ELECTRICAL DATA
Operating Voltage/Test Voltage according to MIL-DTL-5015H
The indicated values for the operating voltage are limits concerning the
electrical function. When the working voltage exceeds 50V, safety precautions
must be in accordance with the following standards: VDE 0100, IEC 309-1
or applicable national standards.
Current Rating
Altitude Voltage Derating* Chart
per MIL-DTL-5015H
p 3.15
CONTACT CONTACT RESISTANCE POTENTIAL VOLTAGE
SIZE MILLIOHM MAX. DROP IN MILLIVOLTS MAX.
16/16S 6 21
12 3 20
8 1/(0.44)* 12 (20)*
4 0.5/(0.23)* 10 (18)*
0 0.2/(0.18)* 10 (27)*
Insulation Resistance @77˚F (25˚C) > 5,000 Megohms
MECHANICAL
Operating Temperature -67˚ to +257˚F (-55˚ to +125˚C) Neoprene
Sealing 33-foot submersible
Sealed when mated. ≈ IP 67 and NEMA 4P
* No attempt has been made to recommend operating voltages. The designer must determine own
operating voltage by the application of a safety factor to the above derating chart to compensate
for circuit transients, surges, etc.
† Not corrected for changes in density due to variations in temperature.
Wire Range Sizes 26 AWG to 0 AWG (See contact selection on apages 94-97)
Contact Resistance
I 1/32 1/16 250 200 1,400 1,000 550 400 325 260
A 1/16 1/8 700 500 2,800 2,000 800 600 450 360
D 1/8 3/16 1,250 900 3,600 2,800 900 675 500 400
E 3/16 1/4 1,750 1,250 4,500 3,500 1,000 750 550 440
B 1/4 5/16 2,450 1,750 5,700 4,500 1,100 825 600 480
C 5/16 1 4,200 3,000 8,500 7,000 1,300 975 700 560
*Using Radsok contact
*Test amps, multiconductor using Radsok contact
TECHNICAL
SPECIFICATIONS
NOMINAL
DISTANCE
STANDARD
SEA LEVEL
CONDITIONS
PRESSURE
ALTITUDE†
50,000 FEET
PRESSURE
ALTITUDE†
70,000 FEET
OPERATING
VOLTAGE*
MS
SERVICE
RATING
AIRSPACE CREEPAGE DC V AC
VRMS
MINIMUM
FLASHOVER
VOLTAGE
AC (RMS)
TEST
VOLTAGE
AC (RMS)
MINIMUM
FLASHOVER
VOLTAGE
AC (RMS)
TEST
VOLTAGE
AC (RMS)
MINIMUM
FLASHOVER
VOLTAGE
AC (RMS)
TEST
VOLTAGE
AC (RMS)
68
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
SEALING RANGE
16 .064 - .130 1.62 - 3.30
12 .114 - .170 2.89 - 4.31
8 .164 - .255 4.16 - 6.47
4 .272 - .370 6.90 - 9.30
0 .415 - .550 10.50 - 13.97
CONTACT
SIZE
Wire Sealing Range The connector is designed for individual wire sealing. Sealing of an outer
cable jacket on multiconductor cables must be accomplished with an
appropriate endbell. Sealing is only guaranteed if wires used are
according to MIL-W-5086 or within the listed ranges.
INCHES MM
Insulation Strip Lengths See Contact Selection Chart on apages 94 and 97
Mating Life 2,000 cycles minimum (AIB/GT) 500 cycles minimum (AIBC/ACA-B)
Salt Spray Olive drab chromate over cadmium - 500 hours
Black alloy - 48 to 200 hours
Conductive black alloy - 48 to 200 hours
Black anodized - 500+ hours
Electroless nickel - 48 hours
Heat Neoprene low-smoke, zero-halogen (LSZH) 257˚F (+125˚C);
Viton 392˚F (+200˚C)
Chemical Resistance Diesel Fuel 48-hour intermittent spray for each
JP-4 chemical with no deterioration,
Hydraulic Fluid followed by Contact Retention (CR),
Gasoline Insulation Resistance (IR), Dielectric Withstanding
Voltage tests (DWV)
Corrosion Resistance Olive Drab Cadmium-Plated 48 hours per MIL-DTL-5015 (3.17/4.6.13)
Fluid Immersion Hydraulic Fluid 20 hours per MIL-DTL-5015 (3.19/4.6.15)
Lubrication Oil 20 hours per MIL-DTL-5015 (3.19/4.6.15)
Vibration Per MIL-STD-810C, method 516.2, procedure VIII
1.0 g peak from 5 to 25 Hz
.030” double amplitude from 25 to 57 Hz
5g peak from 57 to 500 Hz
Basic Shock Per MIL-STD-810C, method 516.2, procedure I pulse at half-sine
wave of 30g for 11 seconds
Gun fire Shock Per MIL-STD-810C, method 516.2, procedure IV pulse at half-sine
wave of 100g for 1.5 seconds
Ballistic Shock Per MIL-STD-810C, method 516.2, procedure IV pulse at half sine
wave of 200g for .5 seconds
Contact Type Solder, crimp, PC, coax, or thermocouple. Hard silver or gold plating.
Contact Insertion From rear with simple hand-tool. Removable, 5 cycles minimum.
Contact Retention Pin and socket contacts are designed to resist severe vibration and
repeated connection and disconnection. Contact retention and separation
is tested according to MIL-DTL-5015H (4.6.6.1)
CONTACT SIZE RETENTION FORCE MIN.
16 10
12 15
8 20
4 20
0 25
TECHNICAL
SPECIFICATIONS
69
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
Number of Circuits 1 to 85
Polarization Key and keyway plus three point bayonet with optional rotational
polarization. See apages 83-93.
Rear Accessories Maximum Torque
THERMOCOUPLE CODES
MATERIAL COLOR CODE CODE
Iron Black IR
Constantan Yellow CON
Copper Alloy – Cu
Chromel White CH
Alumel Green AL
10SL 26
14S 44
16 50
16S 50
18 55
20 65
22 85
24 90
28 114
32 120
36 153
40 170
SIZE IN./LB. MAX.
The next page shows all of the standard possibilities for AIB/GT series connectors. Follow the
nine steps to create a description of the connector best suited to your application. This is not an
Amphenol part number, but gives you a convenient way to select your connector. Contact us with
the description for a valid Amphenol part number. If you prefer to select the Amphenol part number,
see the How-To-Order Guide on a pages 70-71.
Many additional options not shown are available. Contact us if your needs are not met by the options
on the next page.
INSULATOR FOR
PIN CONTACTS
BAYONET
RAMP
RECEPTACLE SHELL
BAYONET PIN
BAYONET COUPLING NUT
FERRULE (SLEEVE)
INSULATOR FOR SOCKET
CONTACT
STAINLESS STEEL STUD
(OPTIONAL)
PLUG SHELL
SEALING RING WAVE SPRING
SOCKET
CONTACT
SKID WASHER
Color code is identified by small dot on
wire well end of contact.
Approvals/Agency Listing UL File# E115497
Thermocouple Types:
J = Iron-Constantan
K = Alumel-Chromel
T = Copper-Constantan
E = Chromel-Constantan
PIN CONTACT
ENDBELL
INDIVIDUAL WIRE SEALING
GROMMET
ENDBELL O-RING
TECHNICAL
SPECIFICATIONS
AIB/GT SERIES
CROSS-SECTION
AIB/GT SERIES
HOW TO ORDER
70
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
* AIBC is the commercial version of the AIB. It comes without wear pins in the receptacles and without wave springs in the coupling nuts.
Note: AIBC are fully intermateable with all reverse bayonet connectors.
2 Front Box
Mount
No Accessory
Threads
INTERNAL THREAD VERSION
EXTERNAL THREAD VERSION
AIB*
CONDUIT METAL
SHIELDED CABLE/HEAT SHRINK
G6
Shielded Plug
6
Standard
Plug
4
Rubber-
Covered
6HD
Heavy-Duty
1 Cable
Mount
with
Accessory
Threads
30 Rear
Wall Mount
with Accessory
Threads
(Most Popular)
0 Front Wall
Mount with
Accessory
Threads
20 Front
Box Mount
with Rear
Accessory
Threads
70 Rear Mount
Jam Nut
with Accessory
Threads
TB Thru
Bulkhead
LOW COST GLAND SEAL
GLAND SEALSHIELDED CABLE BANDING
6B
Box Mount
7 Rear
Mount
Jam Nut
No Accessory
Threads
CONDUIT PLASTIC
aSee pages 444-445
MESH GRIP
AIBC*
CREATE YOUR PART NUMBER USING THESE NINE STEPS
AIB 6HD F A 24-28 P W S -472
CONNECTOR
TYPE
SHELL STYLE END BELLS
(If omtting
endbell, enter -)
CABLE
CLAMP/BOOT
(If needed)
LAYOUT CONTACT ROTATION
(omit for
normal)
CONTACT
TYPE
PLATING/
MODIFICATION
123456789
PLUGS RECEPTACLES
STEP 1: SELECT CONNECTOR TYPE
STEP 2: SELECT SHELL STYLE, PLUG OR RECEPTACLE
STANDARD SPECIALS — CALL WITH NPT THREAD SIZE, SEALTITE CONDUIT DIAMETER, OR CABLE OUTSIDE DIAMETER.
Mates with
71
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
TIP: Order connector, backshell and all accessories as one part number! See www.peigenesis.com/en/solution-guides.html
Heat Shrink Boot
Call with cable outisde
diameter aSee pages
440-441.
RV
No Clamp
G Heat Shrink L Long Extender A Unsealed
(no grommet seal)
F Sealed
(with grommet seal)
T MS Style
(MS3108) 90º
P Potting
*Potting
Compound
aSee
Page 443
STEP 4: SELECT CABLE CLAMP OR BOOT (IF APPLICABLE)
C MS3057-C
Gland Seal aSee
Page 112
A MS3057-A
Standard Cable Clamp
9767 9767
Gland Seal for smaller cable
range.aSee Page 113
U Low-Cost
Shielded
G2 Spin Coupling
Heat Shrink
STEP 3: SELECT CABLE CLAMP OR BOOT (IF APPLICABLE)
* When using a “C” in part number, the connector is supplied
with the standard size crimp contacts for its layout. Bolded part
numbers on apage 94-96 indicate crimp contact. Please call
for connectors with reduced or enlarged crimp barrel contacts.
a** See page 99 for post diameters and lengths.
MATERIALS
L = Low-smoke, zero-halogen
V = High-temperature Viton®*
*Viton® is a registered trademark of DuPont Dow Elastomers
P = Pin S = Socket PS =Style TB Only
STEP 5: SELECT LAYOUT STEP 6: SELECT CONTACT
aSee pages 72-82
aSee pages 83-93 (Omit for normal)
W, X, Y, Z
STEP 7: SELECT ROTATION
S = Solder C = Crimp*
H = PC** 0 = Less Contacts
STEP 8: SELECT CONTACT TYPE
STEP 9: SELECT PLATING
CONTACTS
(Omit for silver contacts)
B30 = Gold 30µ” Gold over Nickel
T = Thermocouple (Solder only)
RDS = RADSOK (Socket only) 12, 8, 4, 0
SHELL PLATING
(Omit for olive drab chromate over cadmium)
023 = Nickel (RoHS with crimp or 116 contacts)
024 = Green Zinc Cobalt
025 = Black Zinc Alloy
(RoHS with crimp or 116 contacts)
027 = Conductive Black Zinc Alloy
(RoHS with crimp or 116 contacts)
G96 = Black Anodized
116 = Less Pre-tinned Solder Cups
472 = 116 & 025 mod codes (RoHS)
548 = 116 & 023 mod codes (RoHS)
553 = 116 & 027 mod codes (RoHS)
72
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
LAYOUTS BY NUMBER OF CONTACTS
LAYOUT 18-14 20-12 20-23 22-1 22-8 22-11 24-1
# OF CONTACTS 1-#16; 1-#4 1-#16; 1-#4 2-#8 2-#8 2-#12 2-#16 1-#12; 1-#0
SERIES
Ìs Ì
Ìè èÌ Ìè Ìès q
SERVICE RATING A A A D E B D
1 CONTACT
LAYOUT 10SL-4* 12S-3* 12S-6 14S-9* 16S-4 16A11 16-11 16-13 18-3
# OF CONTACTS 2-#16 2-#16 2-#16 2-#16 2-#16 2-#12 2-#12 2-#12 2-#12
SERIES
Ìè¢q2 Ìèq2 è Ìèq2 Ìè¢s2 ¢ Ìèq2 Ìq2 Ìè
SERVICE RATING A A Thermocouple A D A A Thermocouple D
3 CONTACTS
2 CONTACTS
SERIES KEY: AIB (=GT) AIT (Ì=MS; v=non QPL) 97 (è=97)
VG95234 (¢) MS3450 (q=MS; s=non QPL) Thermocouple (2)
LAYOUT 8S-1 10S-2 12S-4 12-5 14S-4 14-3 16S-3 16-2
# OF CONTACTS 1-#16 1-#16 1-#16 1-#12 1-#16 1#8 1#16 1-#12
SERIES
Ì è q Ì q Ì q Ì è q Ìè Ì q sÌ Ìs
SERVICE RATING A A D D D A B E
LAYOUT 16-12 18-6 18-7 18-16 18-420 20-2 22-7 24-52
# OF CONTACTS 1-#4 1-#4 1-#8 1-#12 1-#12 1-#0 1-#0 1-#12
SERIES
Ìè¢q Ì q Ì s Ìès è v ¢q Ì q v
SERVICE RATING A D B C 17 KVac D E 21 KVac
24 KVdc 30 KVdc
A B BA
AB AB
A
B
AB
AB
A
B
A
B
A
B
AB
AB AB
AB
AB
A
B
A
BC
CONTACT LEGEND =16 =12 =8 =4 =0
Mating face view of pin inserts
* most popular Pins in receptacle, sockets in plug only for 97/AIT/MS series
LAYOUT 24-9 28-7 32-5 10SL-3 14S-1 14S-7 14S-12 16S-5
# OF CONTACTS 2-#4 2-#4 2-#0 3-#16 3-#16 3-#16 3-#16 3-#16
SERIES
Ìè¢ v Ìè Ìè ¢q Ì èq Ìèq2 vès Ìè
SERVICE RATING A D D A A A A A
73
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
LAYOUTS BY NUMBER OF CONTACTS
LAYOUT 28-6 28-72 36-4 40-AV 12SL-844 14S-2* 14S-10
# OF CONTACTS 3-#4 3-#4 (coax) RG-59A/U or RG-62A/U 3-#0 3-#2/0 4-#16 4-#16 4-#16
SERIES
Ì è v 2
v è Ì è q2
v ès
SERVICE RATING D (coax) D(A); A(B,C) D I I I
LAYOUT 16S-6 16-7 16-10 18-5 18-22 20-3 20-6 20-19
# OF CONTACTS 3-#16 2-#16; 1-#8 3-#12 1-#16; 2-#12 3-#16 3-#12 3-#16 3-#8
SERIES
Ì è Ì è ¢s Ì è ¢q2 Ì èq Ì è q Ì è Ì è Ì è q
SERVICE RATING A A A D D D D A
LAYOUT 20-51 20-59 22-2 22-6 22-9 22-21 22-80 28-3
# OF CONTACTS 3-#8 3-#8 for #10 or #12 wire 3-#8 1-#16; 2-#8 3-#12 2-#16;1-#0
3-#8 for #10 or 12 wire
3-#8
SERIES
v v Ì è ¢ q Ì q Ì è s Ì q v Ì è s
SERVICE RATING A A D D E A A E
AB
C
A
BC
A
BC
A
BC
A
B
CA
B
C
A
B
C
A
BC
A
B
C
AB
C
B
CAA
BC
A
BC
A
B
C
A
BC
A
BC
A
BC
A
BC
A
BC
LAYOUT 16-9 16-59 18-4* 18-10* 18-13 18-15 20-4* 20-20 20-24
# OF CONTACTS 2-#16; 2-#12 4-#12 4-#16 4-#12 3-#12; 1-#8 4-#12 4-#12 3-#12; 1-#4 2-#16; 2-#8
SERIES
Ì è q2
v Ì è q Ì è q Ì è ¢ q Ì è q2 Ì èq2
Ì Ì è q
SERVICE RATING A A D A A Thermocouple D A A
A
BC
D
AB
CD
A
BC
D
A
BC
D
A
B
C
DA
B
C
D
A
B
C
D
LAYOUT 22B22 22-4 22-10 22-22* 24-4 24-22* 32-17
# OF CONTACTS 4-#8 2-#12; 2-#8 4-#16 4-#8 3-#16; 1-#0 4-#8 4-#4
SERIES
¢ Ì è q Ì ès2
Ì è ¢ q s Ì è q Ì è q
SERVICE RATING A A E A D D D
A
B
D
C
A
B
C
D
A
B
C
D
A
BC
D
A
BC
D
A
BC
D
A
BC
D
A
B
C
D
A
B
C
D
SERIES KEY: AIB (=GT) AIT (Ì=MS; v=non QPL) 97 (è=97)
VG95234 (¢) MS3450 (q=MS; s=non QPL) Thermocouple (2)
CONTACT LEGEND =16 =12 =8 =4 =0 =2/0
Mating face view of pin inserts
* most popular
4 CONTACTS
3 CONTACTS (CONT.)
74
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
LAYOUTS BY NUMBER OF CONTACTS
LAYOUT 24-17 24-51 24-53 24-79 28-5 32-1 32-2
# OF CONTACTS 3-#16; 2-#12 5-#8 5-#8 5-#8 2-#16; 1-#12; 2-#4 3-#12; 2-#0 2-#16; 3-#4
SERIES
2 v v v Ì2s Ì ¢ q Ìs
SERVICE RATING D A A A D E(A); D(All others) E
AB
C
D
EA
B
C
D
EA
B
C
D
EA
B
C
D
E
A
B
CD
E
A
B
CD
E
A
B
C
D
E
6 CONTACTS
A
B
GC
N
1
2
3
4
5
LAYOUT 18-29 18-30 18-31 20-14 22-12 22-13 22-34 24-12
# OF CONTACTS 5-#16 5-#16 5-#16 3-#12; 2-#8 3-#16; 2-#8 1-#16; 4-#12 2-#16; 3-#12 3-#12; 2-#4
SERIES
Ì è v è v è Ì è q Ìè ¢ Ì è Ì è Ì è ¢ q
SERVICE RATING A A A A D D(E) A(A,B,C,D) D A
A
B
C
D
E
A
B
C
D
E
A
B
CD
EA
B
C
D
E
A
BC
DE
A
B
C
D
E
LAYOUT 40-57 40-66 40-86 14S-5* 16S-8* 18-11* 18-20
# OF CONTACTS 4-#0 4-#0 (coax) RG-63B/U 4-#0 (coax) RG-115A/U 5-#16 5-#16 5-#12 5-#16
SERIES
v v v Ì è q Ì è q Ì è¢ q2
Ì è
SERVICE RATING E (coax) E/ (coax) I A A A
1
2
3
4
1
2
3
4
1
2
3
4
5 CONTACTS
A
B
C
D
E
A
B
C
D
EA
BC
D
E
AB
C
D
E
SERIES KEY: AIB (=GT) AIT (Ì=MS; v=non QPL) 97 (è=97)
VG95234 (¢) MS3450 (q=MS; s=non QPL) Thermocouple (2)
CONTACT LEGEND =16 =12 =8 =4 =0
Mating face view of pin inserts
4 CONTACTS (CONT.)
LAYOUT 32-63 32-79 40-5 40-75 14S-6* 18-12 20-8
# OF CONTACTS 5-#4 1-#8; 4-#4 5-#0 4-#0; 1-#12 6-#16 6-#16 4-#16; 2-#8
SERIES
q v v v Ì è¢ q2
è Ì q 2
Ì è ¢ q
SERVICE RATING D D A E I A I
A
BC
D
E
FA
B
C
D
E
A
B
C
D
E
F
A
B
C
D
EF
A
BC
D
LAYOUT 32-58 36-5 36-51 36-64 36-65
# OF CONTACTS 4-#4 (coax) RG-161/U 4-#0 2-#4; 2-#0 4-#0 (coax) RG-11/U; 4-#0 (coax) RG-59/U;
or RG-179/U RG-12/U or RG-13/U RG-62/U or RG-71/U
SERIES
v Ì è ¢ q v v v
SERVICE RATING (coax) A D (coax) (coax)
A
B
CD
A
B
C
D
A
B
C
D
A
B
C
D
* most popular
75
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
LAYOUTS BY NUMBER OF CONTACTS
LAYOUT 20-17 20-22 20-66 22-5 22-15 22-24 28-22 28-82
# OF CONTACTS 1-#16; 5-#12 3-#16; 3-#8 1-#16; 5-#12 for #10 wire 4-#16; 2-#12 1-#16; 5-#12 4-#16; 2-#12 3-#16; 3-#4 4-#12; 2-#8
SERIES
Ì è q Ì q v Ì è q2 Ì è ¢s
Ì Ì ¢ q v
SERVICE RATING A A A D A(A, B, C, E, F); E(D) D(C, D, E)A(A, B, F) D D
A
B
C
D
E
F
LAYOUT 36-3 36-6 40-74 14SA7 16S-1* 18-9 18-17
# OF CONTACTS 3-#12; 3-#0 4-#4; 2-#0 1-#12; 1-#4 (coax) RG-62/U; 7-#16 7-#16 5-#16; 2-#12 5-#16; 2-#12
4-#0 (coax) RG-9B/U or RG-214/U
SERIES
Ì ¢ q Ì è ¢ q v v Ì è¢ q2
Ì è¢ q2
v è s
SERVICE RATING D A A / coax A A I I
A
BC
D
E
F
A
B
C
D
E
F
A
B
C
D
E
F
1
2
34
5
6
LAYOUT 20-15* 20-57 22-26 22-28 22-33 24-2 24-3
# OF CONTACTS 7-#12 7-#12 for #14 or 16 wire 5-#16; 2-#12 7-#12 7-#16 7-#12 5-#16; 2-#12
SERIES
Ì èq2
v è Ì Ì Ì è q Ì
SERVICE RATING A A 1/8” spacing D/A D(A, B, C, D); A(E, F, G) D D
A
F
E
D
C
B
G
A
B
CD
E
F
G
A
B
C
D
E
F
G
A
B
CD
EG
FA
B
CD
EG
F
A
B
C
E
F
G
D
A
BC E
FG
D
A
B
CD
E
F
G
100°
A
B
C
D
E
F
G
LAYOUT 24-10 24-16 24-27 24-60 24-66 24-71 24-75
# OF CONTACTS 7-#8 3-#16; 3-#12; 1-#8 7-#16
7-#8 or 12 wire 7-#12 5-#8 for #10 or 12 wire, 2-#8 for #16 wire;
2-#8 5-#8
SERIES
Ì è ¢ q Ì è s Ì è s v v v v
SERVICE RATING A D(A, B, F, G) E A D A A
A(C, D, E)
A
B
C
E
F
G
D
A
B
CD
E
F
G
A
B
CD
E
F
G
A
B
CD
E
F
G
A
B
CD
E
F
G
A
B
C
D
E
F
G
A
B
C
D
E
F
G
6 CONTACTS (CONT.)
LAYOUT 28-10 32-10 36-73 36-77 36-83 40-87
# OF CONTACTS 3-#12; 2-#8; 2-#4 3-#16; 2-#8; 2-#4 7-#4 (coax) RG-62B/U 7-#4 7-#4 (coax) RG-58/U 7-#4
SERIES
Ì è q Ì v v v v
SERVICE RATING D(G); A(All others) E(A, F); B(G); (coax) D (coax) D
D(B, E); A(C, D)
A
B
C
D
E
F
G
A
B
C
D
E
F
G
1
2
34
5
6
7
A
B
C
D
E
F
G
A
B
CD
E
F
G
A
B
C
D
E
F
G
A
B
C
D
E
F
G
A
BC
D
E
F
A
B
CD
E
F
12
3
45
6
A
B
E
F
C
D
A
B
C
D
E
F
A
B
C
DE
F
SERIES KEY: AIB (=GT) AIT (Ì=MS; v=non QPL) 97 (è=97)
VG95234 (¢) MS3450 (q=MS; s=non QPL) Thermocouple (2)
CONTACT LEGEND =16 =12 =8 =4 =0
Mating face view of pin inserts
7 CONTACTS
* most popular
76
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
LAYOUTS BY NUMBER OF CONTACTS
10 CONTACTS
LAYOUT 18-1* 18-19 18-24 20-58 24-21 28-19
# OF CONTACTS 10-#16 10-#16 10-#16 5-#16; 5-#12 9-#16; 1-#8 6-#16; 4-#12
SERIES
Ì è ¢ q2
v è s v ès v Ì è s Ì è s
SERVICE RATING A (B, C, F, G) A A(B, C, F, G); A D B(H, M); D(A, B)
I(all others) I(balance) A(C,E,G,J,K,L)
A
B
C
D
E
F
G
H
I
J
A
BC
DEF G
H
K
J
A
B
C
D
E
F
G
H
JK
AB
C
E
G
H
J
K
L
M
A
BC
DE
F
H
J
K
L
ABC
DEF
G
H
I
LAYOUT 28-1 28-4 28-84 28AY 32-3 32-75
# OF CONTACTS
6-#12; 3-#8 7-#16; 2-#12 9-#8 5-#16; 4-#4 4-#16; 2-#12; 2-#4; 1-#0
2-#12; 7-#8 (coax) RG-180B/U
SERIES
Ì è q Ì s v v Ì ¢ s v
SERVICE RATING D(A, J, E); E(G, P, S); A A D (coax)
A(all others) D(all others)
AB
C
D
E
F
G
H
J
AB
CD
P
S
EFG
A
B
C
DE
F
G
H
I
A
BC
DE F
GH
J
A
B
C
DEF
G
H
J
1
2
3
4
5
67
89
LAYOUT 20-18* 20-21 22-16 22-17 22-20 22-27 24-11
# OF CONTACTS
6-#16; 3-#12 8-#16; 1-#12 6-#16; 3-#12 8-#16; 1-#12 9-#16 8-#16; 1-#8 6-#12; 3-#8
SERIES
Ì è q
Ì è q Ì è 2 Ì s Ì è Ì è ¢ s Ì è ¢ q
SERVICE RATING A A A D(A); A(all others) A D(J); A(all others) A
A
B
C
D
E
F
G
H
I
A
B
C
D
E
FGH
J
A
B
C
D
E
F
G
H
J
A
B
C
D
E
F
G
H
J
A
B
CDE
F
GH
J
A
B
C
D
E
F
G
H
LAYOUT 24-6 32-15 32-52 32-57 40-AD 20A9 20-16
# OF CONTACTS 8-#12 6-#12; 2-#0 6-#12; 2-#0 6-#12; 2-#0 (coax) RG-7/U
4-#8; 4-#0 9-#12 7-#16; 2-#12
SERIES
Ì è s Ì q v v v ¢ Ì èq
SERVICE RATING D(A, G, H); D D (coax) A D(J), I(all others) A
A(all others)
A
BC
DE
F
G
H
A
BC
DE
F
G
H
9 CONTACTS
A
B
C
D
EFG
H
I
A
B
C
D
E
F
G
H
I
SERIES KEY: AIB (=GT) AIT (Ì=MS; v=non QPL) 97 (è=97)
VG95234 (¢) MS3450 (q=MS; s=non QPL) Thermocouple (2)
CONTACT LEGEND =16 =12 =8 =4 =0
Mating face view of pin inserts
8 CONTACTS
A
B
C
DE
F
G
H
A
B
C
DE
F
GH
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
H
LAYOUT 18-8* 20-7* 20-9 20-79 22-18 22-23 22-36 22-65
# OF CONTACTS 7-#16; 1-#12 8-#16 7-#16; 1-#12 7-#16; 1-#12 for #16 wire 8-#16 8-#12 8-#12 8-#12 for #14 or 16 wire
SERIES
Ì è q Ì èq2
Ì
v
s
v
Ì è s Ì èq2
s
v
SERVICE RATING A A (B,C,F,G) DCH; DCH; D(A, B, F, G, H); D(H); D(H) D(H); A(all others)
I(all others) A(all others) A(all others) A(C, D, E) A(all others) A(all others)
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
H
* most popular
77
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
LAYOUTS BY NUMBER OF CONTACTS
LAYOUT 20-33 24-20 36-14 40-67 40-72 40-80
# OF CONTACTS
11-#16 9-#16; 2-#12 6-#16; 5-#12; 5-#8 1-#16; 10-#4 (coax) RG-59/U 1-#16; 10-#4 (coax) RG-9B/U 10-#4; 1-#16
SERIES
Ì è q Ì èq2
Ì v v v
SERVICE RATING A D D A (coax) A (coax) A
A
B
C
D
E
F
K
H
JM
L
AB
C
D
EF
G
H
J
KL
A
B
C
D
E
F
G
H
J
K
L
M
N
IP
Q
AB
CDE
FH
I
J
KL
M
N
AB
CDE
FH
I
J
KL
M
N
AB
CDE
FH
I
J
KL
M
N
11 CONTACTS
LAYOUT 22-63 24-19 28-8 28-9 28-18 28-51
# OF CONTACTS
8-#16; 4-#12 12-#16 10-#16; 2-#12 6-#16; 6-#12 12-#16 12-#12
SERIES
v è Ì è s Ì è q Ì è s v
SERVICE RATING
A A E(L,M,); D(B) A(balance) D C(M); D(G, H, J, K, L) A
A(A, B); I(C,D,E,F)
A
B
C
D
E
F
G
H
J
K
L
M
A
B
C
D
E
F
G
H
J
K
L
M
A
BC
E
F
H
J
K
L
M
N
D
A
B
C
D
E
F
H
J
K
L
M
N
12 CONTACTS
13 CONTACTS
LAYOUT 20-11 20-25 20-30 22-70 24-58 32-14• 20-27*
# OF CONTACTS
13-#16 13-#16 13-#16 5-#16; 8-#12 7-#16; 3-#12; 3-#8 13-#12 14-#16
SERIES
Ì è v è v è v v v Ì èq2
SERVICE RATING
I I I A A D A
A
BC
D
E
F
GH
J
K
L
M
N
A
B
C
DE
F
H
J
K
L
M
N
P
A
B
C
D
E
F
HJ
K
L
M
N
P
A
B
C
D
E
F
G
H
J
KL
M
N
P
A
B
C
D
EF
G
H
I
J
K
L
M
N
A
B
C
D
E
F
H
J
K
LM
N
P
R
14 CONTACTS
A
B
C
D
EF
G
H
J
K
L
M
N
P
A
B
C
D
E
F
G
H
J
K
L
M
N
P
AB
CD EFG
HI JK
LMN
1
2
3
4
56
7
8
9
10
11
12
13
14
A
B
C
D
E
F
G
H
J
K
L
M
N
O
A
B
C
D
E
F
J
L
M
N
H
K
A
B
C
DE
F
G
H
J
K
LM
SERIES KEY: AIB (=GT) AIT (Ì=MS; v=non QPL) 97 (è=97)
VG95234 (¢) MS3450 (q=MS; s=non QPL) Thermocouple (2)
CONTACT LEGEND =16 =12 =8 =4 =0
Mating face view of pin inserts
LAYOUT 22-19* 24-59 28-2 28-20 32-4 32-9 36-78
# OF CONTACTS
14-#16 7-#16; 7-#12 12-#16; 2-#12 4-#16; 10-#12 12-#16; 2-#12 12-#16; 2-#4 12-#8; 2-#16
SERIES
Ì èq2
v Ì è q Ì è¢ q2
Ì Ì q v
SERVICE RATING
A A D A A(F, J, K, N); D A
D(all others)
• different per 1651 STD: 5-#12; 2-#4 * most popular
78
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
LAYOUTS BY NUMBER OF CONTACTS
LAYOUT 24-84 32-76 28-16 36-79 36-80 40-68
# OF CONTACTS
1-#12; 18-#12 (coax) 19-#12,
20-#16 20-#12 20-#12 for #10 wire 21-#8
RG-188/U or RG-174/U
SERIES
v v Ì ès2
v v v
SERVICE RATING A (coax) A A A A A
A
B
C
D
E
F
G
H
J
K
LM
NU
V
R
S
TP
90°
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
12 3
4567
8910 11 12
13 14 15 16
17 18 19
19 CONTACTS
AB
C
D
E
F
G
H
J
K
LM
P
Q
R
S
T
U
VN
1
23 45
678910
11 12 13 14 15
16 17 18 19
20
1
23 45
678910
11 12 13 14 15
16 17 18 19
20
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
20 CONTACTS 21 CONTACTS
LAYOUT 20-29* 28-59 36-13 20A48 20-26 22-14* 24-67
# OF CONTACTS 17-#16 10-#16; 7-#12 15-#16; 2-#12 19-#16 19-#16 19-#16 19-#12
SERIES
Ì èq2
v v ¢ v Ì è ¢q2
v
SERVICE RATING
A A E(N, P, Q); I A A I
A(all others)
AB
C
D
E
F
G
H
J
K
L
MN
PT
SR
A
B
C
D
EF
G
H
J
K
LM
NP
Q
RS
AB CD
EFH
JK
LMN
PR STU
17 CONTACTS
SERIES KEY: AIB (=GT) AIT (Ì=MS; v=non QPL) 97 (è=97)
VG95234 (¢) MS3450 (q=MS; s=non QPL) Thermocouple (2)
CONTACT LEGEND =16 =12 =8 =4 =0
Mating face view of pin inserts
LAYOUT 28-74 28-75 28-79 32-68 32-82 36-14
# OF CONTACTS 9-#16; 4-#8; 3-#8 for #10 wire 9-#16; 7-#8 for #10 wire 7-#8; 9-#16 12-#12; 4-#4 (coax) RG-58C/U 12-#16; 4-#4 6-#16; 5-#12; 5-#8
SERIES
v v v v v Ì
SERVICE RATING A A A A (coax) A D
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
AB
CDE
FG H
J
KLM
NP
QR
AB
CDE
FG H
J
KLM
NP
QR
A
B
C
D
E
F
G
H
J
K
L
M
N
IP
Q
LAYOUT 24-65 28-17* 32-12 40-5¤ 24-5 24-7* 28-66
# OF CONTACTS 4-#16; 11-#12 15-#16 10-#16; 5-#12 6-#12; 4-#8; 2-#4; 3-#0 16-#16 14-#16; 2-#12 14-#12; 2-#8
SERIES
v Ì è q Ì
s Ì èq2
Ì èq2
v
SERVICE RATING A B(R); D(M-P); A(C, D, E, F, G); A A A A
A(A-L) D(all others)
AB
CD EFG
HJK
LM
OP
N
A
B
CD
E
F
G
HJK
L
M
N
P
R
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
15 CONTACTS
AB
C
DE
FGH
JK
LMN
P
S
R
AB
C
D
E
F
G
H
J
K
L
M
N
P
IO
16 CONTACTS
AB
C
D
E
F
H
J
K
L
M
N
PR
S
T
¤ Special arrangement for MS3450 Series
* most popular
79
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
LAYOUTS BY NUMBER OF CONTACTS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 16
17
18
19
20
21
22
23
24
25
26
27
28
A
B
CD
E
H
K
G
J
F
L
Q
P
N
I
M
RS
O
V
Y
Z
W
U
X
b
a
c
T
28 CONTACTS 29 CONTACTS
LAYOUT 28-11* 36-1 36-22 40-7 24-80
# OF CONTACTS 18-#16; 4-#12 18-#16, 4-#12 22-#12 18-#16; 2-#12; 2-#0 23-#16
SERIES
Ì è¢ q2 Ì è v s vs
SERVICE RATING A D D P, Q, U, V, W, X=A; I
D(balance)
A
B
C
D
E
F
G
H
J
K
L
M
I
N
P
R
S
T
U
V
W
X
ABC
DE FGH
IJKL
MN
OP RST
UVW
22 CONTACTS
LAYOUT 32-6 32-13 32-16 32-60 32-62 40-2
# OF CONTACTS 16-#16; 2-#12; 18-#16; 5-#12 16-#16; 2-#12; 15-#16; 8-#8 (coax) 16-#16; 2-#12; 1-#8; 23-#16
3-#8; 2-#4 3-#8; 2-#4 RG-124/U 2-#8 (coax) RG-124/U; 2-#4
SERIES
Ì è ¢ q Ì è q v s v v s
SERVICE RATING A D A A (coax) A (coax) D
ABCD
EFGH J
KLMN PQ
RSTU
V
WX Z
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
AB
CD
EF
GH
J
KL
MN
O
PR
S
T
UV
W
I
X
AB
CD
EF
GH
J
KL
MN
O
PR
S
T
UV
W
I
X
A
B
CD
E
F
H
J
K
LM
N
P
R
S
T
U
V
W
X
Y
Z
a
23 CONTACTS
SERIES KEY: AIB (=GT) AIT (Ì=MS; v=non QPL) 97 (è=97)
VG95234 (¢) MS3450 (q=MS; s=non QPL) Thermocouple (2)
CONTACT LEGEND =16 =12 =8 =4 =0
Mating face view of pin inserts
24 CONTACTS
26 CONTACTS
25 CONTACTS
LAYOUT 28-12* 28-13 40-6 24-96 28A63 40-10
# OF CONTACTS 26-#16 26-#16 24-#16; 1-#12; 1-#0 28-#16 19-#16; 9-#12 16-#16; 9-#8; 4-#4
SERIES
Ì èq2
v è s s v ¢ Ì
SERVICE RATING A A D I A A
ABCD
EFGH J
KL
MNPQ
RSTUV
WX YZ
A
BC
D
G
E
FH
J
KLM NP
Q
T
RSUV
WZ
XY
a
13
12
11
10
9
876
5
4
3
2
1
23
19 22
21
20
15
18
17
16
14
24
25
A
B
C
D
E
F
G
H
J
K
L
M
PR
N
S
T
U
V
W
X
Y
Z
a
b
d
23 CONTACTS (CONT.)
LAYOUT 40-3 40-4 24-28* 24-AJ 32-25
# OF CONTACTS 18-#16; 4-#12; 1-#4 16-#16; 2-#12; 3-#8; 2-#4 24-#16 25-#16 25-#12
SERIES
s
s
Ì è¢ q2
v
v
SERVICE RATING D D I A A
* most popular
80
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
39 CONTACTS
LAYOUT 32-53 32-59 40-AT 36-74 32-73
# OF CONTACTS 37-#16; 5-#12 40-#16; 2-#8 (coax) RG-161/U 18-#16; 24-#12; 1-#8 43-#16; 1-#8 (coax); RG-187B/U 46-#16
SERIES
v v v v v q
SERVICE RATING I/E A (coax) A A (coax) A
42 CONTACTS
ABCDE
F
H
J
K
L
MNP
R
S
T
U
V
W
X
Y
Z
abc
d
f
g
h
i
jk
m
n
p
r
tu
vw
s
q
AB
C
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
ab
c
d
f
g
h
i
j
km
n
p
rt
s
q
AB
C
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
ab
c
d
f
g
h
i
j
km
n
p
rt
s
q
44 CONTACTS 46 CONTACTS
48 49
50 51 52
53 54
55 56 57
58 59 60 61
62 63 64 65 66
67 68 69 70
71 72 73 74 75
76 77 78 79
80 81 82 83
84 85
86 87
88 89
90
91
1
2
3
4
5
6
7
8
9
1011
12
13
14
15
16
17
18
19
20 21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
SERIES KEY: AIB (=GT) AIT (Ì=MS; v=non QPL) 97 (è=97)
VG95234 (¢) MS3450 (q=MS; s=non QPL) Thermocouple (2)
CONTACT LEGEND =16 =12 =8 =4 =0
Mating face view of pin inserts
LAYOUT 40-64 28-21* 40-AG 36-54 36-55
# OF CONTACTS 20-#16; 3-#12; 13-#8 (coax) RG-124/U 37-#16 38-#12 31-#16; 8-#8 31-#16; 8-#8 for #6 wire
SERIES
v Ì è ¢ q2
v v v
SERVICE RATING (coax) A A A A
36 CONTACTS 38 CONTACTS 37 CONTACTS
1
2
3
45
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
A
B
C
D
E
F
H
J
K
L
M
N
P
RS
T
U
V
W
X
Y
Z
a
b
c
d
f
g
h
i
j
k
m
n
p
q
A
BC
D
EFGHJ
KLMNPR
STUVWXZ
abcdef
ghjkm
nprs
43 CONTACTS
LAYOUT 32-8 32-56 40-1 32-31 36-9 36-18
# OF CONTACTS 24-#16; 6-#12 24-#16; 6-#12 for #10 wire 24-#16; 6-#12 31-#16 14-#16; 14-#12; 2-#8; 1-#4 14-#16; 14-#12; 2-#8; 1-#4
SERIES
Ì è2
v Ì q v Ì è q v s
SERVICE RATING A A D A A A
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
30 CONTACTS
34 CONTACTS
ABC
DE FG
HI JKL
MNOP
RS
TU VWX
YZ ab
cde
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26 27
28
29
30 31
AB
CD EFG
HJKLMN
PRSTUV W
XYZabc
def g
hj
km
35 CONTACTS
LAYOUT 36-20 28-15* 32-7* 36-15 36-85 40-35
# OF CONTACTS 30-#16; 2-#12; 2-#8 35-#16 28-#16; 7-#12 35-#16 35-#16 for #12 wire 35-#12
SERIES
v
Ì èq2
Ì è ¢ q Ì èq2
v
v
SERVICE RATING A A I(A, B, H, J); A(all others) D(M); A(balance) A/D D
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
g
h
j
k
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
YZ
a
b
c
d
e
f
gh
j
k
m
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
RS
T
U
V
W
X
Y
Z
a
b
c
d
f
g
h
j
k
m
e
AB
CDEFG
HJKLM
PRS T
N
W
XYZ
UV
abc
d
e
f
g
h
jk
m
l
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17 18
19
20
21
22
23
24
25
26
27
28
29
30
3132
33
34
35
31 CONTACTS
LAYOUTS BY NUMBER OF CONTACTS
* most popular
81
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
52 CONTACTS
LAYOUT 36-403 36-59 36-71
# OF CONTACTS 52-#16 50-#16; 3-#12 for #10 wire 50-#16; 3-#12
SERIES
è v v
SERVICE RATING A A A
ABC
D
EF HJK
LMNPRST
U
VWXYZab
cdfghijk
mn prt
uvw
s
xy
z
q
AA AB
AC
AD
AE
AF
AH
AJ
ABC
D
EF HJK
LMNPRST
U
VWXYZab
cdfghijk
mn prt
uvw
s
xy
z
q
AA AB
AC
AD
AE
AF
AH
AJ
ABC
D
EFHJ
K
LM NPRS
TUVWXY Z
abcdfghi
jkmn pr
tuvw
sx
yz
q
AA AB AC
AD
AE AF
AH
53 CONTACTS
12
34A
567
8910 C
11 12 13 14
15 16 17 +
20
18 19
23
22
24
21
A
B
C
E
F
G
Z
Y
X
b
df
x
r
a
e
3
f
D
H
J
S
R
QPNMLK
TUV
W
c
lk
n
yw
mjhg
2z
tr
s
v
up
654
LAYOUT 36-7* 36-8 36-16 36-17 36-60
# OF CONTACTS 40-#16; 7-#12 46-#16; 1-#12 40-#16; 7-#12 40-#16; 7-#12 40-#16; 7-#12 for #10 wire
SERIES
Ì èq2 Ì èq2 v s v s v
SERVICE RATING A A A A A
47 CONTACTS
A
BC
DE
F
GH
IJKL
M
NOPR
STU
V
WX
Y
Za
bcde
fg hj
k
m
npr
t
u
vw
s
xy
z
AB
CDE
FG
HIJ
KLMN
OPRST
UVW X
YZab c
defg
hjkm
np
r
t
s
uv
xy
z
w
LAYOUT 36-76 40-9 32-48 36-10* 36-11
# OF CONTACTS 47-#16 24-#16; 22-#12; 1-#8 48-#16 48-#16 48-#16
SERIES
v Ì q v Ì è ¢ q2
Ì ès
SERVICE RATING A A I A A
12
3
45
67 8
9101112
13 14 15 16 17
18 19 20 21
22 23 24 25 26
27 28 29 30
31 32 33 34 35
36 37 38 39
40 41 42
43 44
45
46 47
AB
CDE
F
GHIJ
KL
MN OPQ
RST
UVWXYZa
bcd
efg h i
jk
lm
n
p
r
tu
s
o
q
AB
CDE
FG
HIJ
KLMN
OPRST
UVW X
YZab c
defg
hjkm
np
r
t
s
uv
xy
z
w
LAYOUT 36-12
36-75 36-AF 32-414 36-52
# OF CONTACTS 48-#16 48-#16 for #14 wire 48-#16 52-#16 52-#16
SERIES
Ì ès v v è Ì q2
SERVICE RATING A A A A A
12
34 5
67
89
10 11
1213
1415
16
17
18
19
202122
2324
25
2627
28
29
30
31 32
33 34
3536
37
38
394041
42 43
4445
4647
48
AB
C
D
E
F
G
H
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
a
b
c
de
f
g
h
j
k
m
n
p
r
t
s
q
u
v
w
x
y
z
110°
AB
CD EFG
HJ KLMN
OPQR STU
VWXY Zabc
de fg hjk
mnpr
tu vw
s
x
yz
q
AB
CD EFG
HJKLMN
OPQR STU
VWX YZabc
de fg hj k
mnpr
tuvw
s
x
yz
q
100°
AB
CD EFG
HJKLMN
OPQRSTU
VWXY Zabc
def g hj k
mnpr
tuvw
s
x
yz
q
SERIES KEY: AIB (=GT) AIT (Ì=MS; v=non QPL) 97 (è=97)
VG95234 (¢) MS3450 (q=MS; s=non QPL) Thermocouple (2)
CONTACT LEGEND =16 =12 =8 =4 =0
Mating face view of pin inserts
48 CONTACTS
LAYOUTS BY NUMBER OF CONTACTS
* most popular
82
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
LAYOUTS BY NUMBER OF CONTACTS
SERIES KEY: AIB (=GT) AIT (Ì=MS; v=non QPL) 97 (è=97)
VG95234 (¢) MS3450 (q=MS; s=non QPL) Thermocouple (2)
CONTACT LEGEND = 20 =16 =12 =8 =4 =0
Mating face view of pin inserts
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62 CONTACTS
LAYOUT 40-70 40-73 40-81 40-82
# OF CONTACTS 61-#16 61-#16 62-#16 for #14 wire 62-#16
SERIES
v
v v v
SERVICE RATING A A A A
ABCD
EF HJ KLM
NPRSTUVW
XYZabcdfg
hijkmn pr
tuvw
s
xyz
q
AA AB
AC AD AE AF AH AJ AK AL AM AN
AP AR AS AT
AU AV AW AX AY
AZ BA BB
BV
BC BD BE BF BH
BJ BK BL BM BN
BS BT BU
BP BR
1234
567891011
12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28
29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53
54 55 56 57 58
59 60 61 62
1234
567891011
12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28
29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53
54 55 56 57 58
59 60 61 62
85 CONTACTS
54 CONTACTS
LAYOUT 32-22 32-64 32-AF 36-66 40-61
# OF CONTACTS 54-#16 54-#16 55-#16 52-#16; 4-#12 55-#16; 3-#12; 1-8
SERIES
v s v v s v
SERVICE RATING A I A A A
55 CONTACTS
12
34567
8910 11 12 13 14 15
16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40 41
42 43 44 45 46 47 48 49
50 51 52 53 54 55 56
57
58
59
AB
CDE
FGHJ
KLM
NO PR
STUVW
XYZa
bcdef
ghjk
mnpr
t
q
suv
xy
zAA
AB AC
AD AE
AF AG
w
AB
CDE
FGHJ
KLM
NO PR
STUVW
XY Za
bcdef
ghjk
n
m
pr
tuv
w
s
xy
z
q
AA
AB AC
AD AE
AF AG
AH
AB
CDE
FGHJ
KLM
NOPR
STUVW
XYZ
a
bcd e f
ghjk
mnpr
t u v
w
s
xy
z
q
AA
AB AC
AD AE
AF AG
59 CONTACTS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
3335
36
37
38
39
40
41
42
43
44
45
46
47
34
48
49
50
51
52
53
54
55
56
57
58
59
60
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61 CONTACTS
LAYOUT 40-53 40-62 40-85 32A69 40-63
# OF CONTACTS 60-#16 60-#16 60-#16 for #14 wire 41-#20; 20-#16 61-#16 for #14 wire
SERIES
v2
Ì s v ¢ v
SERVICE RATING A A A I A
1
2345
678910
11 12 13 14 15 16 17 18
19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35
36 37 38 39 40 41 42 43 44
45 46 47 48 49 50 51 52
53 54 55 56 57
58 59 60 61
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
60 CONTACTS
56 CONTACTS
LAYOUT 40-56
# OF CONTACTS 85-#16
SERIES
Ìq2
SERVICE RATING A
* most popular
83
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
DEGREES OF ROTATION
CONTACTS SIZES SERVICE
RATING
LAYOUT 20 16 12 8 4 0 W X Y Z
8S-1 è Ì q 1 1 - - - - A
10S-2 Ì^ q 1 1 - - - - A
10SL-3 è Ì ¢ q 3 3 - - - - A
10SL-4 è Ì^ ¢ q 2 2 63# - - - A
10SL-51 v s 2 2 2 10SL-4 45º A=Ir.; B=Con.
10SL-52 v s 2 2 2 10SL-4 45º A=Cu; B=Con.
10SL-53 v s 2 2 2 10SL-4 45º A=Al.; B=Ch.
10SL-54 v s 3 3 2 10SL-3 A=Ir.; B=Con.; C=Cu
10SL-55 v s 3 3 2 10SL-3 A=Al.; B=Ch.; C=Cu
10SL-56 v s 2 2 2 10SL-4 A=Al.; B=Ch.
10SL-57 v s 2 2 2 10SL-4 A=Ch.; B=Con.
10SL-58 v s 3 3 2 10SL-3 A=Ch.; B=Al.; C=Cu
10SL-59 v s 2 2 2 10SL-4 A=Ch.; B=Al.
10SL-60 v s 2 2 2 10SL-4 A=Ir.; B=Con.
10SL-61 v s 2 2 2 10SL-4 A=Cu; B=Con.
10SL-62 v s 3 3 2 10SL-3 A=Cu; B=Al.; C=Ir.
10SL-63 v s 3 3 2 10SL-3 A, C=Con.; B=Ch.
10SL-64 v s 3 3 2 10SL-3 A, C=Ch.; B=Al.
12S-1 v s 2 2 12S-3 100º A
12S-2 è v s 2 2 12S-3 250º A
12S-3 è Ì q 2 2 70 145 215 290 A
12S-4 Ì q 1 1 - - - - D
12S-6 è
2 2
2 12S-3 A=Con.; B=Ir.
12S-51 v s 2 2 2 12S-3 315º A=Ch.; B=Al.
12S-54 v s 2 2 2 12S-3 315º A = Ir.; B=Con.
12S-55 v s 2 2 2 12S-3 45º A=Cu; B=Con.
12S-56 v s 2 2 2 12S-3 A=Al.; B=Ch.
12S-57 v s 2 2 2 12S-3 60º A=Ch.; B=Al.
12S-58 v s 2 2 2 12S-3 120º A=Ir.; B=Con.
12S-59 v s 2 2 2 12S-3 A=Ir.; B=Con.
12S-60 v s 2 2 2 12S-3 A=Cu; B=Con.
12S-61 v s 2 2 2 12S-3 A=Ch.; B=Con.
12S-62 v s 2 2 2 12S-3 A=Ch.; B=Al.
12SL844 è 4 4 - - - - I
12-5 è Ì q 1 1 - - - - D
14S-1 è Ì q 3 3 - - - - A
14S-2 è Ì q 4 4 - 120 240 - I
14S-4 è Ì^ 1 1 - - - D
14S-5 è Ì q 5 5 - 110 - - I
LAYOUTS BY SHELL SIZE
2
MATING-FACE VIEW OF PIN INSERTS
ALTERNATE INSERT POSITION (ROTATION)
SERIES KEY: 97 (è=97) AIT (Ì=MS; v=non QPL) AIB (=GT) VG95234 (¢) MS3450 (q=MS; s=non QPL) Thermocouple (2)
CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.)
97 Series
AIT Series
AIB/GT
VG95234
MS3450
TOTAL
Pins in receptacle, sockets in plug only ^ 5015 QPL not all configurations #Rotation commercial only, not MS-approved
NOTE: 16S contacts are used in shell sizes 8S, 10S, 10SL, 12S, 14S, & 16S
84
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
DEGREES OF ROTATION
CONTACTS SIZES SERVICE
RATING
LAYOUTS BY SHELL SIZE
2
LAYOUT 20 16 12 8 4 0 W X Y Z
14S-6 è Ì ¢ q 6 6 90# - - - I
14S-7 è Ì q 3 3 90 180 270 - A
14S-9 è Ì q 2 2 70 145 215 290 A
14S-10 è v s 4 4 14S-2 100º I
14S-11 è v s 4 4 14S-2 250° I
14S-12 è v s 3 3 14S-1 100° A
14S-13 è v s 3 3 14S-1 260° A
14S-14 è v 4 4 14S-2 100° I
14S-51 v s 2 2 2 14S-9 90° A=Al.; B=Ch.
14S-52 v s 4 4 2 14S-2 45° A, B=Cu; C=Al.; D=Ch.
14S-53 v s 2 2 2 14S-9 90° A=Ir.; B=Con.
14S-54 v s 6 6 2 14S-6 45° A, C, E=Ir.; B, D, F=Con.
14S-55 v s 4 4 2 14S-2 45° A, C=Ir.; B, D=Con.
14S-56 v s 4 4 2 14S-2 45° A=Ir.; B=Con.; C, D=Cu
14S-57 v s 4 4 2 14S-2 45° A, C=Al.; B, D=Ch.
14S-58 v s 3 3 2 14S-7 45° A=Al.; B=Ch.; C=Cu
14S-59 v s 2 2 2 14S-9 90° A=Cu; B=Con.
14S-60 v s 2 2 2 14S-9 A=Al.; B=Ch.
14S-61 v s 6 6 2 14S-6 45° A=Al.; B=Ch.; C=Ir.; D=Con.; E, F=Cu
14S-63 v s 6 6 2 14S-6 A, C= Al.; B, D=Ch.; E=Ir.; F=Con.
14S-64 v s 4 4 2 14S-2 A, C=Con.; B, D=Cu
14S-65 v s 6 6 2 14S-6 A, C, E= Cu; B, D, F=Con.
14S-67 v s 6 6 2 14S-6 A=Al.; B=Ch.; Balance=Cu
14S-68 v s 4 4 2 14S-2 45° A=Ch.; B=Con.; C, D=Cu
14S-69 v s 3 3 2 14S-7 A=Con.; B=Ch.; C=Cu
14S-70 v s 4 4 2 14S-2 A, D=Ch.; B, C=Al.
14S-71 v s 4 4 2 14S-2 A, B, D=Cu; C=Con.
14S-72 v s 2 2 2 14S-9 A=Con.; B=Cu
14S-73 v s 4 4 2 14S-2 A, B=Cu; C=Al.; D=Ch.
14S-74 v s 4 4 2 14S-2 A, B=Ch.; C, D=Al.
14S-75 v s 4 4 2 14S-2 A, B=Cu; C, D=Con.
14S-76 v s 4 4 2 14S-2 A, C=Al.; B, D=Ch.
14S-77 v s 4 4 2 14S-2 A, D=Al.; B, C=Ch.
14S-78 v s 2 2 2 14S-9 A=Ch.; B=Al.
14SA7 v 7 7 - - - - A
14-3 Ì q 1 1 - - - - A
16S-1 è Ì ¢ q 7 7 80 - - 280 A
16S-3 Ì s 1 1 - - - - B
16S-4 è Ì ¢ s 2 2 35 110 250 325 D
16S-5 è Ì 3 3 70 145 215 290 A
16S-6 è Ì 3 3 90 180 270 - A
16S-8 è Ì q 5 5 - 170 265 - A
16S-14 è v 3 3 16S-5 110° A
16S-15 è v 2 2 16S-4 100° D
16S-16 è v 2 2 16S-4 250° D
16S-17 è v 3 3 16S-5 250° A
16S-52 v s 2 2 2 16S-4 A=Ch.; B= Al.
16S-54 v
s 7 7 2 16S-1 A=Al.; B=C; Balance=Cu
NOTE: 16S contacts are used in shell sizes 8S, 10S, 10SL, 12S, 14S, & 16S. #Rotation commercial only. Not MS-approved. Not used for 97 series.
97 Series
AIT Series
AIB/GT
VG95234
MS3450
TOTAL
SERIES KEY: 97 (è=97) AIT (Ì=MS; v=non QPL) AIB (=GT) VG95234 (¢) MS3450 (q=MS; s=non QPL) Thermocouple (2)
CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.)
85
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
LAYOUT 20 16 12 8 4 0 W X Y Z
16S-55 v s 7 7 2 16S-1 A=Con.; Balance=Cu
16A11 ¢ 2 2 35 110 250 125 A
16SA18 è v 7 7 16S-1 100° A
16SA19 è v 7 7 16S-1 260° A
16SA20 è v 7 7 16S-1 110° A
16SA21 è v 7 7 16S-1 250° A
16-2 Ì s 1 1 - - - - E
16-7 è Ì ¢ s 3 2 1 80 110 250 280 A
16-9 è Ì q 4 2 2 35 110 250 325 A
16-10 è Ì ¢ q 3 3 90 180 270 - A
16-11 è Ì q 2 2 35 110 250 325 A
16-12 è Ì ¢ q 1 1 - - - - A
16-13 è Ì q 2 2 2 35 110 250 325 A = Ir.; B = Con.
16-52 v s 2 2 2 16-11 90° A=Al.; B=Ch.
16-53 v s 4 2 2 2 16-9 70° A=Al.; C=Ch.; B, D=Cu
16-55 v s 3 3 2 16-10 45° A=Al.; B=Ch.; C=Cu
16-56 v s 2 2 2 16-13 90° A=Con.; B=Cu
16-57 v s 3 3 2 16-10 A=Al.; B=Cu; C=Ch.
16-58 v s 3 3 2 16-10 A=Con.; B, C=Cu
16-59 v 4 4 80 - - 280 A
16-60 v s 2 2 2 16-13 A=Al.; B=Ch.
16-62 v s 2 2 2 16-11 A=Con.; B=Cu
18A31 è v 10 10 18-1 110° A (B,C,F,G) I (all others)
18-1 è Ì ¢ q 10 10 70 145 215 290 A (B,C,F,G) I (all others)
18-3 è Ì 2 2 35 110 250 325 D
18-4 è Ì q 4 4 35 110 250 325 D
18-5 è Ì q⁕⁕ 3 1 2 80 110 250 280 D
18-6 Ì q⁕⁕ 1 1 - - - - D
18-7 Ì ^ s 1 1 - - - - B
18-8 è Ì q 8 7 1 70 - - 290 A
18-9 è Ì ¢ q 7 5 2 80 110 250 280 I
18-10 è Ì q 4 4 - 120 240 - A
18-11 è Ì ¢ q 5 5 - 170 265 - A
18-12 è Ì q 6 6 80 - - 280 A
18-13 è Ì ¢ q 4 3 1 80 110 250 280 A
18-14 Ì ^ s 2 1 1 80 110 250 280 A
18-15 è† Ì q
⁕⁕⁕ 4 4 2 - 120 240 - A, C=Ir. B, D=Con.
18-16 è Ì ^ s 1 1 - - - - C
18-17 è v s 7 5 2 18-9 100° I
18-18 è v s 7 5 2 18-9 250° I
18-19 è v s 10 10 80 120 240 - A
18-20 è Ì ^ 5 5 90 180 270 - A
18-22 è Ì ^ q 3 3 70 145 215 290 D
18-23 è v s 10 10 18-1 100° A (B,C,F,G) I (all others)
18-24 è v s 10 10 18-1 250° A (B,C,F,G) I (all others)
18-25 è v 2 2 18-3 100° D
18-26 è v 2 2 18-3 250° D
DEGREES OF ROTATION
CONTACTS SIZES SERVICE
RATING
LAYOUTS BY SHELL SIZE
2
† Socket only for 97 Series ^ 5015 QPL not all configurations ⁕⁕Socket only for MS3450 series ⁕⁕⁕Pin only for MS3450
NOTE: 16S contacts are used in shell sizes 8S, 10S, 10SL, 12S, 14S, & 16S
97 Series
AIT Series
AIB/GT
VG95234
MS3450
TOTAL
SERIES KEY: 97 (è=97) AIT (Ì=MS; v=non QPL) AIB (=GT) VG95234 (¢) MS3450 (q=MS; s=non QPL) Thermocouple (2)
CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.)
86
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
DEGREES OF ROTATION
CONTACTS SIZES SERVICE
RATING
LAYOUT 20 16 12 8 4 0 W X Y Z
18-27 è v s⁕⁕ 3 1 2 18-5 100° D
18-28 è v s⁕⁕ 3 1 2 18-5 250° D
18-29 è Ì^ 5 5 90 180 270 - A
18-30 è v 5 5 18-20 110° A
18-31 è v 5 5 18-20 260° A
18-420 è 1 HV 1 HV 24 KVdc, 17 KVac
18-51 v s 6 6 2 18-12 A=Ir.; B, E=Con.; D=Cu; C, F=Dummy
18-52 v s 5 5 2 18-11 A=Ir.; B=Con.; C=Ch.; D=Al.; E=Dummy
18-53 v s 6 6 2 18-12 A, D=Ir.; B, E=Con.; C, F=Dummy
18-54 v s 4 4 2 18-15 A, C=Al.; B, D=Ch.
18-56 v s 10 10 2 18-1 45° A, C, E, G, I=Ir.; B, D, F, H, J=Con.
18-57 v s 6 6 2 18-12 45° A, C, E=Al.; B, D, F=Ch.
18-59 v s 6 6 2 18-12 45° A, C=Ir.; B, E, F=Con.; D=Cu
18-60 v s 5 5 2 18-11 45° A, D=Al.; B, C,=Ch.; E=Cu
18-61 v s 6 6 2 18-12 A, C=Ir.; B, D=Con.; E=Ch.; F=Al.
18-62 v s 6 6 2 18-12 A, B, C=Ir.; D, E, F=Con.
18-63 v s 4 4 2 18-15 A, C=Con.; B, D=Cu
18-65 v s 6 6 2 18-12 A=Ir.; B=Con.; Balance=Cu
18-66 v s 10 10 2 18-1 A, C, E, G, I=Cu; B, D, F, H, J=Con.
18-67 v s 6 6 2 18-12 A, C, E=Cu; B, D, F=Con.
18-68 v s 5 5 2 18-11 A, D=Al.; B, C=Ch.; E=Cu
18-69 v s 10 10 2 18-1 A=Al.; B=Ch.; Balance=Cu
18-70 v s 5 5 2 18-11 A=Ir.; B=Con.; C=Ch.; D=Al.; E=Cu
18-71 v s 4 4 2 18-15 A=Con.; Balance=Cu
18-72 v s 4 4 2 18-15 D=Con.; Balance=Cu
18-73 v s 7 5 2 2 18-9 A=Al.; D=Ch.; Balance=Cu
18-74 v s 6 6 2 18-12 A=Ch.; B=Al.; D=Ir.; E=Cu; C, F=Con.
20A9 ¢
9 9
- 110 250 - D(J), I(all others)
20A16 è v 13 13 20-11 182° I
20A37 è v 4 4 20-4 250° D
20A48 ¢
19 19 80 280 - - I
20-2 v ¢ q 1 1 - - - - D
20-3 è Ì^ 3 3 70 145 215 290 D
20-4 è Ì q 4 4 45 110 250 - D
20-6 è Ì^ 3 3 70 145 215 290 D
20-7 è Ì q 8 8 80 110 250 280 A(B,C.F,G) I(all others)
20-8 è Ì ¢ q 6 4 2 80 110 250 280 I
20-9 Ì s 8 7 1 80 110 250 280 D(H), A(all others)
20-11 è Ì 13 13 - - - - I
20-12 Ì^ 2 1 1 80 110 250 280 A
20-14 è Ì q 5 3 2 80 110 250 280 A
20-15 è Ì q 7 7 80 - - 280 A
20-16 è Ì q 9 7 2 80 110 250 280 A
20-17 è Ì^ q 6 1 5 90 180 270 - A
20-18 è Ì q 9 6 3 35 110 250 325 A
20-19 è Ì q 3 3 90 180 270 - A
20-20 Ì^ 4 3 1 80 110 250 280 A
20-21 è Ì q 9 8 1 35 110 250 325 A
LAYOUTS BY SHELL SIZE
2
⁕⁕ Socket only for MS3450 series ^
5015 QPL not all configurations
NOTE: 16S contacts are used in shell sizes 8S, 10S, 10SL, 12S, 14S, & 16S
97 Series
AIT Series
AIB/GT
VG95234
MS3450
TOTAL
SERIES KEY: 97 (è=97) AIT (Ì=MS; v=non QPL) AIB (=GT) VG95234 (¢) MS3450 (q=MS; s=non QPL) Thermocouple (2)
CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.)
87
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
LAYOUT 20 16 12 8 4 0 W X Y Z
20-22 Ì q 6 3 3 80 110 250 280 A
20-23 è Ì 2 2 35 110 250 325 A
20-24 è Ì q 4 2 2 35 110 250 325 A
20-25 è v 13 13 20-11 100° I
20-26 v 19 19 - 90 280 - A
20-27 è Ì q 14 14 35 110 250 325 A
20-29 è Ì q 17 17 80 - - 280 A
20-30 è v 13 13 20-11 250° I
20-32 è v s 8 8 20-7 260° A(B,C,F,G) I(all others)
20-33 è Ì q 11 11 - - - 280# A
20-51 v 3 3 - - - - A
20-52 v s 4 4 2 20-4 315° A=Ir.; B=Con.; C=Ch.; D=Al.
20-56 v s 8 8 2 20-7 45° A, B, G, H=Ir.; C, D, E, F=Con.
20-57 v 7‡ 7‡ - - - - A
20-58 v 10 5 5 - - - - A
20-59 v 3‡ 3‡ - - - - A
20-60 v s 8 8 2 20-7 45° D=Ch.; E=Al.; Balance=Cu
20-61 v s 17 17 2 20-29 45° A, B, M=Cu; Balance=Con.
20-62 v s 7 7 2 20-15 80° A, C, E=Al.; B, D, F=Ch.; G=Cu
20-64 v s 14 14 2 20-27 A=Al.; C=Ch.; Balance=Cu
20-65 v s 14 14 2 20-27 A, B, C, D, E, F, G=Ir.; H, I, J, K, L, M, N=Con.
20-66 v 6‡ 1 5‡ - - - - A
20-67 v s 9 7 2 2 20-16 H=Al.; I=Ch.; Balance=Cu
20-68 v s 8 8 2 20-7 A, B, G, H=Con.; C, D, E, F=Cu
20-69 v s 14 14 2 20-27 A, B, C, D, E, F, G=Cu; H, I, J, K, L, M, N=Con.
20-70 v s 17 17 2 20-29 A, C, E, G, J, L, N, R, T=Ir.; B, D, F, H, K, M, P, S=Con.
20-71 v s 17 17 2 20-29 S=Al.; R=Ch.; Balance=Cu
20-74 v s 17 17 2 20-29 A, C, E, G, J, L, N, R=Ir.; B, D, F, H, K, M, P, S=Con.;T=Cu
20-75 v s 7 7 2 20-15 G=Al.; Balance=Ch.
20-77 v s 9 7 2 2 20-16 A=Con.; Balance=Cu
20-79 v 8‡ 7 1‡ - - - - D(H); A (all others)
20-80 v s 14 14 2 20-27 A, C, E, G, I, K, M=Cu; B, D, F, H, J, L, N=Con.
20-81 v s 14 14 2 20-27 A, C, E, G, I, K, M=Ch.; B, D, F, H, J, L, N=Al.
20-82 v s 17 17 2 20-29 A, C, E, G, J, L, N, R=Al.; B, D, F, H, K, M, P, S=Ch.; T=Cu
22B22 ¢
4 4 - 110 250 - A
22-1 è Ì 2 2 35 110 250 325 D
22-2 è Ì ¢ q 3 3 70 145 215 290 D
22-4 è Ì q⁕⁕ 4 2 2 35 110 250 325 A
22-5 è Ì q⁕⁕ 6 4 2 35 110 250 325 D
22-6 Ì q⁕⁕ 3 1 2 80 110 250 280 D
22-7 Ì q
⁕⁕⁕ 1 1 - - - - E
22-8 è Ì^ 2 2 35 110 250 325 E
22-9 è Ì s 3 3 70 145 215 290 E
22-10 è Ì s 4 4 35 110 250 325 E
22-11 è Ì s 2 2 35 110 250 325 B
22-12 è Ì^ ¢ 5 3 2 80 110 250 280 D
22-13 è Ì^ 5 1 4 35 110 250 325 A(A-D) D(E)
DEGREES OF ROTATION
CONTACTS SIZES SERVICE
RATING
LAYOUTS BY SHELL SIZE
2
#Rotation commercial only, not MS-approved ‡ Reduced contact crimp pot ^ 5015 QPL not all configurations
⁕⁕ Socket only for MS3450 series ***Pin only for MS3450 series
97 Series
AIT Series
AIB/GT
VG95234
MS3450
SERIES KEY: 97 (è=97) AIT (Ì=MS; v=non QPL) AIB (=GT) VG95234 (¢) MS3450 (q=MS; s=non QPL) Thermocouple (2)
CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.)
TOTAL
88
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
DEGREES OF ROTATION
CONTACTS SIZES SERVICE
RATING
LAYOUT 20 16 12 8 4 0 W X Y Z
22-14 è Ì ¢ q 19 19 80 110 250 280 A
22-15 è Ì s 6 1 5 80 110 250 280 A(A-C, E, F) E(D)
22-16 è Ì 9 6 3 80 110 250 280 A
22-17 Ì^ s 9 8 1 80 110 250 280 D(A) A(all others)
22-18 è Ì s 8 8 80 110 250 280 A(C-E) D(all others)
22-19 è Ì q 14 14 80 110 250 280 A
22-20 è Ì^ 9 9 35 110 250 325 A
22-21 Ì^ q 3 2 1 80 110 250 280 A
22-22 è Ì ¢ q 4 4 - 110 250 - A
22-23 è Ì q 8 8 35 - 250 - D(A-D): A(E-G)
22-24 Ì 6 4 2 80 110 250 280 D(C, D, E) A(A, B, F)
22-26 è
7 5 2 - - - - 1/8” spacing
22-27 è Ì ¢ s 9 8 1 80 - 250 280 D(J) A(all others)
22-28 è Ì^ 7 7 80 - - 280 A
22-30 è v s 19 19 22-14 100° A
22-31 è v 2 2 22-11 100° B
22-32 è v s 6 4 2 22-5 260° D
22-33 Ì^ 7 7 80 110 250 280 D(A-D) A(E-G)
22-34 è Ì 5 2 3 80 110 250 280 D
22-36 s 8 8 90 - 270 - D(H); A(all others)
22-57 v s 19 19 2 22-14 45° A, C, E, G, J, L, N, R=Ir.; B, D, F, H, K,
M, P, S=Con.; T, U, V=Cu
22-60 v s 19 19 2 22-14 45° U=Al.; N=Ch.; Balance=Cu
22-62 v s 8 8 2 22-23 60° A, B, F, G=Al.; C, D, E, H=Ch.
22-63 v 12 8 4 20 - - - A
22-65 v 8‡ 8‡ - - - - D(H); A(all others)
22-68 v s 14 14 2 22-19 45° A, C, E, G, J, L, M=Ir.; B, D, F, H, K, P, N=Con.
22-69 v s 14 14 2 22-19 45° A, C, E, G, J, L, M=Cu; B, D, F, H, K, P, N=Con.
22-70 v 13 5 8 - - - - A
22-71 v s 19 19 2 22-14 V=Al.; U=Ch.; Balance=Cu
22-72 v s 6 4 2 2 22-5 B=Al.; E=Ch.; Balance=Cu
22-73 v s 6 4 2 2 22-5 E=Al.; B=Ch.; Balance=Cu
22-74 v s 8 8 2 22-23 A, C, E, G=Ir.; B, D, F, H=Con.
22-75 v s 8 8 2 22-23 A=Al.; B, D, G, H=Cu; C=Ch.; E=Ir.; F=Con.
22-76 v 21 21
2 W=Con.; Balance=Cu
22-77 v s 14 14
2 22-19 B, D, F, H, J, K, M, P=Cu; A, E, L=Ir.; C, G, N=Con.
22-78 v s 19 19
2 22-14 A, C, E, G, H, K, M, P, R, T=Con.; Balance=Cu
22-79 v s 4 4
2 22-10 A, C,=Con.; B, D=Cu
22-80 v 3‡ 3‡ - - - - A
24A35 v 16 14 2 24-7 100° A
24-2 è Ì q 7 7 80 - - 280 D
24-3 Ì^ 7 5 2 80 110 250 280 D
24-4 s 4 3 1 80 110 250 280 D
24-5 è Ì q 16 16 80 110 250 280 A
24-6 è Ì^ s 8 8 80 110 250 280 D(A,G,H) A(all others)
24-7 è Ì q 16 14 2 80 110 250 280 A
LAYOUTS BY SHELL SIZE
2
97 Series
AIT Series
AIB/GT
VG95234
MS3450
TOTAL
SERIES KEY: 97 (è=97) AIT (Ì=MS; v=non QPL) AIB (=GT) VG95234 (¢) MS3450 (q=MS; s=non QPL) Thermocouple (2)
CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.)
^ 5015 QPL not all configurations
89
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
DEGREES OF ROTATION
CONTACTS SIZES SERVICE
RATING
LAYOUTS BY SHELL SIZE
2
LAYOUT 20 16 12 8 4 0 W X Y Z
24-9 è Ì ¢ 2 2 35 110 250 325 A
24-10 è Ì ¢ q 7 7 80 - - 280 A
24-11 è Ì ¢ q 9 6 3 35 110 250 325 A
24-12 è Ì ¢ q 5 3 2 80 110 250 280 A
24-15 v s 16 16 24-5 100° A
24-16 è Ì^ s 7 3 3 1 80 110 250 280 D(A, B, F, G) A(C, D, E)
24-17 Ì^ 5 3 2 80 110 250 280 D
24-19 è v 12 12 - - - - A
24-20 è Ì q 11 9 2 80 110 250 280 D
24-21 è Ì s 10 9 1 80 110 250 280 D
24-22 è Ì q 4 4 45 110 250 - D
24-24 s 16 16 24-5 250° A
24-25 è v 8 8 24-6 100° D(A, G, H) A(all others)
24-26 è v 8 8 24-6 250° D(A, G, H) A(all others)
24-27 è Ì s 7 7 80 - - 280 E
24-28 è Ì ¢ q 24 24 80 110 250 280 I
24-51 v 5 5 - 108 - - A
24-52 v 1 HV 1HV 30 KVdc, 21 KVac
24-53 v 5‡ 5‡ - 108 - - A
24-56 v s 11 9 2 2 24-20 45° E=Al.; F=Ch.; Balance=Cu
24-57 v s 24 24 2 24-28 45° A, C, J, V, Y, W, K, E, H, U, S, M=Ch.; Balance=Al.
24-58 v 13 7 3 3 - - - - A
24-59 v 14 7 7 - - - - A
24-60 v 7‡ 7‡ - - - - A
24-62 v s 24 24 2 24-28 A, C, E, G=Ir.; B, D, F, H=Con.; R, T=Ch.; S, U=Al.; Balance=Cu
24-63 v s 24 24 2 24-28 A, C, E, G, J, L, K, N, S, U, W, Y=Cu;
B, D, F, H, Q, R, M, P, T, V, X, Z=Con.
24-64 v s 16 16 2 24-5 A, B, C, D, E, F, G, H=Ir.; J, K, L, M, N, P, R, S=Con.
24-65 v 15 4 11 - - - - A
24-66 v 7 7 - - - - D
24-67 v 19 19 16 - - - I
24-68 v s 24 24 2 24-28 D=Con.; Balance=Cu
24-71 v 7‡ 7‡ - - - - A
24-75 v 7‡ 7‡ - - - - A
24-79 v 5 5 - 108 - - A
24-80 v s 23 23 35 145 240 300 I
24-81 v 16 14 2 2 24-7 A, C, E, G, I, K, M, N, P=Cu; B, D, F, H, J, L, O=Con.
24-84 v 19 19 (18) - - - - A/Coax
24-96 v 28 28 65 - - - I
24-AJ v 25 25 80 110 250 280 A
28A63 ¢
28 19 9 - 110 260 - A
28-1 è Ì q 9 6 3 80 110 250 280 D(A, E, J) A(all others)
28-2 è Ì q 14 12 2 35 110 250 325 D
28-3 è Ì s 3 3 70 145 215 290 E
28-4 Ì^ s 9 7 2 80 110 250 280 E(G, P, S) D(all others)
28-5 Ì^ s 5 2 1 2 35 110 250 325 D
28-6 è Ì^ 3 3 70 145 215 290 D
28-7 v 2 2 35 110 250 325 D
97 Series
AIT Series
AIB/GT
VG95234
MS3450
SERIES KEY: 97 (è=97) AIT (Ì=MS; v=non QPL) AIB (=GT) VG95234 (¢) MS3450 (q=MS; s=non QPL) Thermocouple (2)
CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.)
TOTAL
‡ Reduced contact crimp pot ^ 5015 QPL not all configurations ( ) Number of contacts that are coax
90
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
LAYOUT 20 16 12 8 4 0 W X Y Z
28-8 è Ì^ s 12 10 2 80 110 250 280 E (L, M) D(B) A (all others)
28-9 è Ì q 12 6 6 80 110 250 280 D
28-10 è Ì q 7 3 2 2 80 110 250 280 D(G) A (all others)
28-11 è Ì ¢ q 22 18 4 80 110 250 280 A
28-12 è Ì q 26 26 90 180 270 - A
28-13 è v s 26 26 28-12 100° A
28-15 è Ì q 35 35 80 110 250 280 A
28-16 è Ì s 20 20 80 110 250 280 A
28-17 è Ì q 15 15 80 110 250 280 A(A-L) B(R) D(M-P)
28-18 è Ì s 12 12 70 145 215 290 C(M) D(G, H, J, K, L)
A(A, B) I(C, D, E, F)
28-19 è Ì s 10 6 4 80 110 250 280 A(C, E, G, J, K, L)
B(H, M) D(A, B)
28-20 è Ì^ ¢ q 14 4 10 80 110 250 280 A
28-21 è Ì ¢ q 37 37 80 110 250 280 A
28-22 Ì^ ¢ q 6 3 3 70 145 215 290 D
28-51 v 12 12 80 135 195 - A
28-53 v s 22 18 4 2 28-11 45° J, L=Al.; K, M=Ch.; Balance=Cu
28-58 v s 14 4 10 2 28-20 45° A, C, E, G, K, M=Al.; B, D, F, H, L, N=Ch.; J, P=Cu
28-59 v 17 10 7 - - - - A
28-61 v s 37 37 2 28-21 45° A, C, J, Z, m, r, n, a, K, F, H, X, k, h, T, M, N,
d=Ir.; Balance=Con.
28-63 v s 14 4 10 2 28-20 45° A, C, E, G, J=Al.; B, D, F, H, P=Ch.; Balance=Cu
28-64 v s 35 35 2 28-15 A, d=Al.; B, j=Ch.; C, D, E, F, G, N, P, R, S, H, J, K,
L, M, W, X, Y, Z=Con.;Balance=Cu
28-65 v s 26 26 2 28-12 A, C, E, G, J, L, N, R, T, V=Ir.; X, Z=Al.; B, D, F, H,
K, M, P, S, U, W=Con.;Y, a=Ch.; b, d=Cu
28-66 v 16 14 2 50 100 165 - A
28-67 v s 20 20 2 28-16 U=Con.; Balance=Cu
28-68 v s 35 35 2 28-15 45° T=Al.; U=Ch.; Balance=Cu
28-69 v s 22 18 4 2 28-11 G=Al.; R=Ch.; Balance=Cu
28-70 v s 22 18 4 2 28-11 A=Al.; B=Ch.; Balance=Cu
28-72 v 3 3(3) - - - - Coax
28-74 v 16‡ 9 7‡ 70 133 227 290 A
28-75 v 16‡ 9 7‡ 70 133 227 290 A
28-79 v 16 9 7 70 133 227 290 A
28-82 v 6 4 2 - - - - D
28-84 v 9 9 45 157 90 135 A
28-77 v s 22 18 4 2 28-11 J=Con.; Balance=Cu
28-81 v s 37 37 2 28-21 A, D, S, Z, n, s=Ir.; B, J, K, f, g, r=Con.; G, L, P, b,
e, j=Al.; F, H, T, X, h, k=Ch.; Balance=Cu
28-AY v 9 5 4 80 110 250 280 A
32A29 v 23 16 2 3 2 32-6 250° A
32A30 v 5 3 2 32-1 100° E(A) D(all others)
32A69 ¢
61 41 20 - 110 250 - I
32-1 Ì ¢ q 5 3 2 80 110 250 280 E(A) D(all others)
32-2 Ì s 5 2 3 70 145 215 290 E
DEGREES OF ROTATION
CONTACTS SIZES SERVICE
RATING
LAYOUTS BY SHELL SIZE
2
97 Series
AIT Series
AIB/GT
VG95234
MS3450
TOTAL
SERIES KEY: 97 (è=97) AIT (Ì=MS; v=non QPL) AIB (=GT) VG95234 (¢) MS3450 (q=MS; s=non QPL) Thermocouple (2)
CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.)
‡ Reduced contact crimp pot ^ 5015 QPL not all configurations ( ) Number of contacts that are coax
91
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
LAYOUT 20 16 12 8 4 0 W X Y Z
32-3 Ì ¢ s 9 4 2 2 1 80 110 250 280 D
32-4 Ì^ 14 12 2 80 110 250 280 A (F, J, K, N) D( all others)
32-5 è Ì 2 2 35 110 250 325 D
32-6 è Ì ¢ q 23 16 2 3 2 80 110 250 280 A
32-7 è Ì ¢ q 35 28 7 80 125 235 280 I (A, B, H, J) A (all others)
32-8 è Ì 30 24 6 80 125 235 280 A
32-9 Ì^ q 14 12 2 80 110 250 280 D
32-10 Ì^ 7 3 2 2 80 110 250 280 E (A, F) B (G)
D(E) A(D)
32-12 Ì^ 15 10 5 80 110 250 280 A (C, D, E, F, G)
D(all others)
32-13 è Ì q 23 18 5 80 110 250 280 D
32-14 v 13 13 65 130 230 295 D
32-15 Ì^ q 8 6 2 35 110 250 280 D
32-16 v s 23 16 2 3 2 32-6 100° A
32-17 è Ì q 4 4 45 110 250 - D
32-19 v s 5 3 2 32-1 260° E(A) D(all others)
32-20 v s 23 16 2 3 2 32-6 260° A
32-22 v s 54 54 80 110 250 280 A
32-25 v 25 25 60 125 - - A
32-31 v 31 31 80 125 215 280 A
32-48 v 48 48 80 - - - I
32-51 v 30 24 6 2 32-8 90° M=Ch.; N= Al.; Balance=Cu
32-52 v 8 6 2 32-15 90° D
32-53 v 42 37 5 - - - - I/E
32-55 v 30 24 6 2 32-8 125° M, N=Ch.; O, P=Al.; Balance=Cu
32-56 v 30‡ 24 6‡ - - - - A
32-57 v 8 6 2(2) - - - - Coax
32-58 v .4 4(4) - - - - Coax
32-59 v 42 40 2(2) - - - - Coax
32-60 v 23 15 8(8) 72 145 215 200 A/Coax
32-62 v 23 16 2 3(2) 2 - - - - A/Coax
32-63 q 5 5 - - - - D
32-64 v 54 54 80 100 110 250 I
32-68 v 16 12 4(4) 30 - - - A/Coax
32-73 v q 46 46 36 - - - A
32-75 v 9 2 7(7) - - - - Coax
32-76 v 19 19 44 147 254 - A
32-79 v 5 1 4 - - - - D
32-82 v 16 12 4 30 - - - A
32-414 è 52 52 - - - - A
32-AF v 55 55 80 110 250 280 A
36-1 è Ì^ 22 18 4 80 110 250 280 D
36-3 Ì^ ¢ q 6 3 3 70 145 215 290 D
36-4 Ì^ 3 3 70 145 215 290 A(B, C) D(A)
36-5 è Ì ¢ q 4 4 - 120 240 - A
36-6 è Ì ¢ q 6 4 2 35 110 250 325 A
36-7 è Ì q 47 40 7 80 110 250 280 A
36-8 è Ì q 47 46 1 80 110 250 280 A
DEGREES OF ROTATION
CONTACTS SIZES SERVICE
RATING
LAYOUTS BY SHELL SIZE
2
97 Series
AIT Series
AIB/GT
VG95234
MS3450
SERIES KEY: 97 (è=97) AIT (Ì=MS; v=non QPL) AIB (=GT) VG95234 (¢) MS3450 (q=MS; s=non QPL) Thermocouple (2)
CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.)
TOTAL
‡ Reduced contact crimp pot ^ 5015 QPL not all configurations ( ) Number of contacts that are coax
92
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
LAYOUT 20 16 12 8 4 0 W X Y Z
36-9 è Ì q 31 14 14 2 1 80 125 235 280 A
36-10 è Ì ¢ q 48 48 80 125 235 280 A
36-11 è v s 48 48 36-10 100° A
36-12 è v s 48 48 36-10 250° A
36-13 Ì^ 17 15 2 80 110 250 280
E(N,P,Q) A(all others)
36-14 Ì^ 16 6 5 5 90 180 270 - D
36-15 è Ì q 35 35 60 125 245 305 D(M) A(all others)
36-16 v s 47 40 7 36-7 100° A
36-17 v s 47 40 7 36-7 250° A
36-18 v s 31 14 14 2 1 36-9 100° A
36-20 v 34 30 2 2 - - - - A
36-21 v s 31 14 14 2 1 36-9 260° A
36-22 v 22 22 - - - - D
36-51 v 4 2 2 - 127 - - D
36-52 Ì^ q 52 52 72 144 216 288 A
36-53 v s 47 40 7 2 36-7 45° u, v, w=Al.; x, y, z=Ch.; Balance=Cu
36-54 v 39 31 8 - - - - A
36-55 v 39‡ 31 8‡ - - - - A
36-56 v s 48 48 2 36-10 A, C, E, G, L, J, H, P, R, T, V, X, Z, b, d, f, h, k, q,
n, m, u, w, y=Con.; Balance=Cu
36-59 v 53‡ 50 3‡ - - - - A
36-60 v 47‡ 40 7‡ - - - - A
36-61 v s 35 35 2 36-15 A, C, E, J, K, L, M, N, P, R, T, V, f, X, Y, h, j,
c=Con.; Balance=Cu
36-62 v s 48 48 2 36-10 A, C, E=Al.; B, D, F=Ch.; Balance=Cu
36-64 v 4 4(4) - - - - Coax
36-65 v 4 4(4) - - - - Coax
36-66 s 56 52 4 110 250 260 280 A
36-71 v 53 50 3 - - - - A
36-73 v 7 7(7) 81 279 - - Coax
36-74 v 44 43 1(1) - - - - A
36-75 v 48‡ 48‡ - - - - A
36-76 v 47 47 - - - - A
36-77 v 7 7 81 279 - - D
36-78 v 14 2 12 35 106 254 325 A
36-79 v 20 20 30 110 250 330 A
36-80 v 20‡ 20‡ 30 110 250 330 A
36-82 v s 52 52 2 36-52 v, g=Ir.; p, y, c=Con. x=Ch.; Balance=Cu
36-83 v 7 7(7) 81 279 - - Coax
36-85 v 35‡ 35‡ - - - - A/D
36-403 è 52 52 - - - - A
36-57 v s 47 46 1 2 36-8 W=Al.; f=Ch.; Balance=Cu
36-58 v s 35 35 2 36-15 H=Al.; G=Ch.; Balance=Cu
36-AF v 48 48 65 - - - A
40-1 Ì q 30 24 6 65 130 235 300 D
40-2 s 23 23 80 110 250 280 D
40-3 s 23 18 4 1 80 110 250 280 D
LAYOUTS BY SHELL SIZE
2
DEGREES OF ROTATION
CONTACTS SIZES SERVICE
RATING
97 Series
AIT Series
AIB/GT
VG95234
MS3450
TOTAL
SERIES KEY: 97 (è=97) AIT (Ì=MS; v=non QPL) AIB (=GT) VG95234 (¢) MS3450 (q=MS; s=non QPL) Thermocouple (2)
CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.)
‡ Reduced contact crimp pot ^ 5015 QPL not all configurations ( ) Number of contacts that are coax
93
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
LAYOUT 20 16 12 8 4 0 W X Y Z
40-4 s 23 16 2 3 2 80 110 250 280 D
40-5## s 15 6 4 2 3 80 110 250 280 A
40-5 v 5 5 33 - - 270 A
40-6 s 26 24 1 1 80 110 250 280 D
40-7 s 22 1 8 2 2 80 1 1 0 25 0 280 P,Q,U,V,W,X = A; Bal.= D
40-9 Ì q 47 24 22 1 65 125 225 310 A
40-10 Ì^ 29 16 9 4 65 125 225 310 A
40-35 v 35 35 70 130 230 290 D
40-53 v 60 60 80 110 250 280 A
40-56 Ì q 85 85 72 144 216 288 A
40-57 v 4 4 30 150 - - E
40-58 v s 85 85 2 40-56 A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z,
AB, AD, AF, AJ, AL,AN, AP, AS, AU, AW,
AY, BA, BC, BE, BH, BK, BM, BP, BS, BU=Ir.; Balance=Con.
40-59 v s 85 85 2 40-56 B=Ch.; C=Con.; Balance=Cu
40-61 v 59 55 3 1 - - - - A
40-62 Ì s 60 60 30 130 220 290 A
40-63 v 61‡ 61‡ - - - - A
40-64 v 36 20 3 13(13) - - - - Coax
40-66 v 4 4(4) - - - - Coax
40-67 v 11 1 10(10) - - - - A/Coax
40-68 v 21 21 - - - - A
40-70 v 61 61 - - - - A
40-72 v 11 1 10(10) - - - - A/Coax
40-73 v 61 61 - - - - A
40-74 v 6 1 1(1) 4(4) - - - - A/Coax
40-75 v 5 1 4 - - - - E
40-77 v 60 60 2 40-56 55, 60=Ir.; 57, 58, 59=Con.; 56=Ch.; Balance=Cu
40-78 v 60 60 2 40-53 50 51=Ir.; 27, 28, 29, 31, 32, 34, 36, 37=Con.; 25, 39,
40, 41=Al 43,44,45, 46, 47, 48, 49, 52, 53, 54=Ch.;
Balance=Cu
40-80 v 11 1 10 72 144 210 288 A
40-81 v 62‡ 62‡ - - - - A
40-82 v 62 62 - - - - A
40-85 v 60‡ 60‡ - - - - A
40-86 v 4 4(4) - - - - E/Coax
40-87 v 7 7 37 74 285 322 D
40-AD v 8 4 4 45 - - - A
40-AG v 38 38 37 74 285 322 A
40-AT v 43 18 24 1 80 110 250 280 A
40-AV v 3 3#2/0 90 180 270 - D
DEGREES OF ROTATION
CONTACTS SIZES SERVICE
RATING
LAYOUTS BY SHELL SIZE
2
97 Series
AIT Series
AIB/GT
VG95234
MS3450
SERIES KEY: 97 (è=97) AIT (Ì=MS; v=non QPL) AIB (=GT) VG95234 (¢) MS3450 (q=MS; s=non QPL) Thermocouple (2)
CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.)
TOTAL
‡ Reduced contact crimp pot ^ 5015 QPL not all configurations ( ) Number of contacts that are coax
94
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
PIN & SOCKET CRIMP CONTACTS
16S 16-18-20 AIC16S-16P AIC16S-16PG AIC16S-16S AIC16S-16SG -
12-14 AIC16S-12P AIC16S-12PG AIC16S-12S AIC16S-12SG C4
14-16 AIC16S-14P AIC16S-14PG AIC16S-14S AIC16S-14SG C3
18-20 AIC16S-20P AIC16S-20PG AIC16S-20S AIC16S-20SG C13
20-22 AIC16S-22P AIC16S-22PG AIC16S-22S AIC16S-22SG C14
22-24 AIC16S-24P AIC16S-24PG AIC16S-24S AIC16S-24SG C2
16 16-18-20 AIC16-16P AIC16-16PG AIC16-16S AIC16-16SG -
12-14 AIC16-12P AIC16-12PG AIC16-12S AIC16-12SG C4
14-16 AIC16-14P AIC16-14PG AIC16-14S AIC16-14SG C3
18-20 AIC16-18P AIC16-18PG AIC16-18S AIC16-18SG C13
20-22 AIC16-20P AIC16-20PG AIC16-20S AIC16-20SG C14
20-24 AIC16-2024P AIC16-2024PG AIC16-2024S AIC16-2024SG C36
22-24 AIC16-22P AIC16-22PG AIC16-22S AIC16-22SG C2
12 12-14 AIC12-12P AIC12-12PG AIC12-12S AIC12-12SG - .312 (7.9)
12 High-Power - - AIC12-12SRAD - -
8-10 AIC12-8P AIC12-8PG AIC12-8S AIC12-8SG C5
10-12 AIC12-10P AIC12-10PG AIC12-10S AIC12-10SG C8
14-16 AIC12-14P AIC12-14PG AIC12-14S AIC12-14SG C9
16-18 AIC12-16P AIC12-16PG AIC12-16S AIC12-16SG C7
18-20 AIC12-18P AIC12-18PG AIC12-18S AIC12-18SG C6
20-22 AIC12-20P AIC12-20PG AIC12-20S AIC12-20SG C40
8 8 AIC8-8P AIC8-8PG AIC8-8S AIC8-8SG -
8 High-Power - - AIC8-8SRAD - -
10-12 AIC8-10P AIC8-10PG AIC8-10S AIC8-10SG C10
12-14 AIC8-12P AIC8-12PG AIC8-12S AIC8-12SG C38
4 4 AIC4-4P AIC4-4PG AIC4-4S AIC4-4SG -
4 High-Power - - AIC4-4SRAD - -
8 AIC4-8P AIC4-8PG AIC4-8S AIC4-8SG C15
0 0 AIC0-0P AIC0-0PG AIC0-0S AIC0-0SG - .
0 High-Power - - AIC0-0SRAD - -
0-2 AIC0-2P AIC0-2PG AIC0-2S AIC0-2SG C11
4 AIC0-4P AIC0-4PG AIC0-4S AIC0-4SG C12
PIN CONTACT SOCKET CONTACT
CONTACT
SIZE WIRE
SIZE
PIN CONTACT
WIRE SEALING
RANGE
INCHES (MM)
WIRE STRIP
LENGTHS
INCHES (MM)
SOCKET CONTACT
SILVER GOLD SILVER GOLD
WIRE STRIP
LENGTHS
PART NUMBER
16S†
16
12
8
4
0
.090 -.118
(2.3-3.0)
.312
(7.9)
.126 - .177
(3.2-4.5)
.563
(14.3)
.150 - .256
(3.8-6.5)
.500
(12.7)
.279 - .366
(7.1 - 9.3)
.750
(19.0)
SOLDER THERMOCOUPLE CONTACTS
TYPE PINS SOCKETS
16S Alumel 10-040799-02P* 10-040799-02S*
Chromel 10-040799-01P* 10-040799-01S*
Iron 10-040799-03P* 10-040799-03S*
Constantan 10-040799-04P* 10-040799-04S*
16 Alumel 10-040799-12P* 10-040799-12S*
Chromel 10-040799-11P* 10-040799-11S*
Iron 10-040799-13P* 10-040799-13S*
Constantan 10-040799-14P* 10-040799-14S*
SOLDER THERMOCOUPLE CONTACTS
TYPE PINS SOCKETS
12 Alumel 10-040799-42P* 10-040799-42S*
Chromel 10-040799-41P* 10-040799-41S*
Iron 10-040799-43P* 10-040799-43S*
Constantan 10-040799-44P* 10-040799-44S*
16S†
16
12
*Contact us for availability
† 16S contacts are used in 8S, 10S, 10SL, 12S, 14S and 16S connector
sizes only.
WIRE RANGE
.394 - .539
(10.0 - 13.7)
Bolded items are standard crimp contacts.
.312
(7.9)
•
•
••
Thermocouple Types: J = Iron-Constantan K = Alumel-Chromel
T = Copper-Constantan E = Chromel-Constantan
95
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
PIN & SOCKET CRIMP CONTACTS
†† Contact us for additional tool accessories.
AF8
TH29-1 Die-set, locator and
Go-No-Go gauge
400BHD
WA27F
TOOLS
ACCESSORIES
CONTACT
SIZE
WIRE
HOLE FILLER
COLOR
CRIMP TOOLS
CRIMP
LOCATOR &
DIE SETS
LOCATOR
COLOR
PILOT
PIN/INSERTION
GUIDE FOR
SOCKETS
INSERTION
TOOL EXTRACTION TOOL
16S†
MS27488-16-3
(Blue)
AF8-(hand)
WA27F-
(pneumatic)
††
TH29-1
Red
10-242758-016 DAK168-16
DRK59
Kit with
Multiple Tips
16
Pin-Blue
Socket-
Green
12 MS27488-12-3
(Yellow) Green 10-242758-012 DAK168-12
8MS27488-8-3
(Red)
400BHD
Die Set
414DA-8N
Locator
4025-Pin
4026-Socket
- 10-242758-008 DAK282
4MS27488-4-3
(Blue)
Die Set
414DA-4N
Locator
4043-2
- - AIC4INS AIC4EXT
0MS27488-0-3
(Yellow)
Die Set
414DA-0N
Locator
4042
- - AIC0INS AIC0EXT
96
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
PIN & SOCKET COAX CONTACTS
-
--
-
21-33033-8
4
8
COAX
CONTACT
SIZE
COAX
WIRE
SIZE
PINS
WIRE SEALING
RANGE
INCHES (mm)
WIRE STRIP
LENGTHS
INCHES (mm)
SOCKETS
SILVER GOLD SILVER GOLD
WIRE HOLE
FILLER
MIN. MAX.
PIN CONTACT ACCESS-
ORIES
RG140/U
RG302/U
RG55B/U
RG142A/U
RG142B/U
RG223/U
21-33060-10()
21-33060-11()
RG59B/U
RG62A/U
RG62B/U
RG210/U
RG212/U 0.279
(7.1)
0.366
(9.3)
21-33034-3(1)
21-33014-3(5)
21-33016-1(3)
21-33130-3 ()
21-33064-20()
31-33060-12() 21-33059-12()
Blue
10-405996-4
0.150
(3.8)
0.256
(6.5)
White
10-405996-8
( ) Various platings available. Availability of coax contacts varies widely. Contact us for details.
All dimensions in inches (millimeters in parenthesis)
21-33014-1(5)
21-33016-5(3)
21-33130-2()
21-33034-2(1) 21-33033-2(1)
21-33048-2()
21-33013-1(5)
21-33047-2()
21-33015-5(3)
21-33129-2()
21-33034-5(1)
21-33033-3(1)
21-33014-5(5)
21-33016-2(3)
21-33130-5()
21-33064-21()
21-33033-5(1)
21-33013-5(5)
21-33015-2(3)
21-33129-3()
21-33063-21()
21-33013-(6)
21-33047-3()
21-33129-6()
RG58C/U
RG141A/U
RG303/U
RG59B/U
RG62A/U
RG62B/U
RG210/U
RG161/U
RG174A/U
RG179B/U
RG187A/U
RG188A/U
RG316/U
RG180B/U
RG195A/U
21-33034-1
21-33014-21
21-33048-1()
21-33130-1()
21-33014-22
21-33033-1
21-33013-21
21-33047-1()
21-33129-1 ()
21-33013-22
0.126
(3.2)
0.177
(4.5)
Yellow
10-405996-12
21-33013-3(5)
21-33015-1(3)
21-33129-3()
21-33063-20()
21-33014-6(5)
21-33048-3()
21-33130-6()
21-33033-6
21-33034-6
21-33034-8
RG161/U
RG174A/U
RG179B/U
RG187A/U
RG188A/U
RG316/U
21-33014-8(5)
21-33033-8
21-33130-8()
21-33013-8(5)
21-33129-8()
RG178B/U
RG196A/U
21-33059-10()
21-33059-11()
21-33013-5(5)
21-33129-4()
21-33033-4
21-33014-5(5)
21-33130-4()
21-33034-4
RG55B/U
RG142A/U
RG142B/U
RG223/U
Contact us
for details
Contact us
for details
Contact us
for details
--
SOCKET CONTACT
PART NUMBER
WIRE STRIP
LENGTH
WIRE RANGE
12
-
-
97
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
PIN & SOCKET COAX CONTACTS
M22520/5-01 M22520/5-39 A
TOOLS
B
M22520/10-07
M22520/10-01 B
M22520/5-45
M22520/5-01
A
M22520/10-05
M22520/10-01
B
M22520/10-07
A
B
M22520/5-01 M22520/5-45
M22520/10-01 M22520/10-07
RG140/U
RG302/U
RG55B/U
RG142A/U
RG142B/U
RG223/U
RG59B/U
RG62A/U
RG62B/U
RG210/U
RG212/U
RG58C/U
RG141A/U
RG303/U
RG59B/U
RG62A/U
RG62B/U
RG210/U
RG161/U
RG174A/U
RG179B/U
RG187A/U
RG188A/U
RG316/U
RG180B/U
RG195A/U
RG161/U
RG174A/U
RG179B/U
RG187A/U
RG188A/U
RG316/U
RG178B/U
RG196A/U
RG55B/U
RG142A/U
RG142B/U
RG223/U
A
B
11-8676-1
11-8676-2
M22520/10-05
M22520/10-01
11-8676-3
11-8676-2
11-8676-4
4
8
12
Crimp Dies
COAX
CONTACT SIZE
COAX
WIRE SIZE
HAND-CRIMP TOOL CRIMP DIES USE
LOCATOR
COAX CLAMP
NUT WRENCH
All dimensions in inches (millimeters in parenthesis)
B
A
A
M22520/5-01 M22520/5-39
98
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
AIB/GT AIBC/ACA-B
PLUGS RECEPTACLES
AIB/GT AIBC/ACA-B
COMPONENTS
Ferrule/Sleeve
Compression Ring
O-Ring
Barrel/Shell
Insert/
Insulator
Contacts
Wave Spring
and Skid
Washer
(Optional)
Coupling Nut
Individual Wire
Sealing Grommet
Endbell/
Backshell/
Cable Clamp
99
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
DIMENSIONS
All dimensions in inches (millimeters in parenthesis)
PRINTED CIRCUIT CONTACTS
10SL .188 .567
(4.78) (14.40)
14S .188 .567
(4.78) (14.40)
16S .188 .567
(4.78) (14.40)
16 .188 .622
(4.78) (15.80)
18 .188 .622
(4.78) (15.80)
20 .188 .622
(4.78) (15.80)
22 .188 .622
(4.78) (15.80)
24 .188 .622
(4.78) (15.80)
28 .188 .657
(4.78) (16.69)
32 .188 .720
(4.78) (18.29)
36 .188 .720
(4.78) (18.29)
40 .188 .720
(4.78) (18.29)
SHELL
SIZE
H SERIES
S X
12 .134 .070
(3.4) (1.78)
16 .063 .030
(1.6) (0.76)
CONTACT
SIZE
D
P
100
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
DIMENSIONS
STYLE 0, 2, 20, 30 RECEPTACLES
R
RS
S
T
RS
N
M
N
P
B
L
L1
KK2
.6250-24 UNEF 1.087
(27.6)
.7500-20 UNEF 1.087
(27.6)
.8750-20 UNEF 1.087
(27.6)
.8750-20 UNEF 1.331
(33.8)
1.0000-20 UNEF 1.331
(33.8)
1.1250-18 UNEF 1.331
(33.8)
1.2500-18 UNEF 1.331
(33.8)
1.3750-18 UNEF 1.331
(33.8)
1.6250-18 UNEF 1.406
(35.7)
1.8750-16 UN 1.469
(37.3)
2.0625-16 UN 1.469
(37.3)
2.3125-16 UN 1.469
(37.3)
B
THREAD
CLASS 2A
L
+ .012
(+ 0.3)
10SL .717 .717 .110 .717 1.000 .126 .626
(18.2) (18.2) (2.8) (18.2) (25.4) (3.2) (15.9)
14S .717 .969 .126 .906 1.181 .126 .756
(18.2) (24.6) (3.2) (23.0) (30.0) (3.2) (19.2)
16S .717 1.079 .126 .969 1.280 .126 .882
(18.2) (27.4) (3.2) (24.6) (32.5) (3.2) (22.4)
16 .846 1.079 .126 .969 1.280 .126 .882
(21.5) (27.4) (3.2) (24.6) (32.5) (3.2) (22.4)
18 .907 1.213 .157 1.063 1.378 .126 1.008
(23.1) (30.8) (4.0) (27.0) (35.0) (3.2) (25.6)
20 .907 1.346 .157 1.157 1.496 .126 1.142
(23.1) (34.2) (4.0) (29.4) (38.0) (3.2) (29.0)
22 .907 1.472 .157 1.252 1.614 .126 1.268
(23.1) (37.4) (4.0) (31.8) (41.0) (3.2) (32.2)
24 .907 1.610 .157 1.374 1.752 .146 1.390
(23.1) (40.9) (4.0) (34.9) (44.5) (3.7) (35.3)
28 .947 1.839 .157 1.563 2.000 .146 1.630
(24.1) (46.7) (4.0) (39.7) (50.8) (3.7) (41.4)
32 .947 2.102 .157 1.752 2.244 .169 1.882
(24.1) (53.4) (4.0) (44.5) (57.0) (4.3) (47.8)
36 .947 2.346 .157 1.937 2.500 .169 2.063
(24.1) (59.6) (4.0) (49.2) (63.5) (4.3) (52.4)
40 .947 2.579 .157 2.185 2.752 .169 2.323
(24.1) (65.5) (4.0) (55.5) (69.9) (4.3) (59.0)
SHELL
SIZE
M
+.016-.000
(+0.4-0.0)
N
+.000-.006
(+0.00-0.15)
P
± .008
(±0.2)
R
± .004
(±0.1)
S
± .012
(±0.3)
T
+.004-.000
(+0.1-0.0)
KK
MAX.
1.890 .787
(48.0) (20.0)
1.890 .945
(48.0) (24.0)
1.890 1.024
(48.0) (26.0)
2.205 1.024
(56.0) (26.0)
2.244 1.161
(57.0) (29.5)
2.244 1.299
(57.0) (33.0)
2.244 1.417
(57.0) (36.0)
2.244 1.575
(57.0) (40.0)
2.244 1.811
(57.0) (46.0)
2.362 2.028
(60.0) (51.5)
2.362 2.283
(60.0) (58.0)
2.362 2.539
(60.0) (64.5)
L1
MAX.
KK2
MAX.
0, 20, 30
N
MP
KK
L
20, 20, 30 RV
All dimensions in inches (millimeters in parenthesis)
101
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
DIMENSIONS
STYLE 0, 20, 30 RECEPTACLES
L3
JJBBZ
J
K3
.6250-24 UNEF .409 .374 2.110 1.969 3.197
(10.4) (9.5) (53.6) (50.0) (81.2)
.7500-20 UNEF .520 .374 2.145 1.969 3.232
(13.2) (9.5) (54.5) (50.0) (82.1)
.8750-20 UNEF .638 .374 2.145 1.969 3.232
(16.2) (9.5) (54.5) (50.0) (82.1)
.8750-20 UNEF .638 .374 2.240 2.362 3.571
(16.2) (9.5) (56.9) (60.0) (90.7)
1.0000-20 UNEF .756 .374 2.315 2.362 3.646
(19.2) (9.5) (58.8) (60.0) (92.6)
1.1875-18 UNEF .867 .374 2.300 2.362 3.631
(22.0) (9.5) (58.4) (60.0) (92.2)
1.1875-18 UNEF .965 .374 2.305 2.362 3.636
(24.5) (9.5) (58.5) (60.0) (92.4)
1.4375-18 UNEF 1.094 .374 2.320 2.560 3.651
(27.8) (9.5) (58.9) (65.0) (92.7)
1.4375-18 UNEF 1.228 .374 2.490 2.560 3.896
(31.2) (9.5) (63.2) (65.0) (99.0)
1.7500-18 UNS 1.488 .433 2.635 2.560 4.104
(37.8) (11.0) (66.9) (65.0) (104.2)
2.0000-18 UNS 1.780 .465 2.680 3.150 4.149
(45.2) (11.8) (68.1) (80.0) (105.4)
2.2500-16 UN 2.016 .465 2.680 3.150 4.149
(51.2) (11.8) (68.1) (80.0) (105.4)
B
THREAD
CLASS 2A
F
MIN.
K1
MIN.
L2
MAX.
L3
MAX.
.138 .461 1.969 .303 .524 .610
(3.5) (11.7) (50.0) (7.7) (13.3) (15.5)
.138 .461 1.969 .417 .669 .752
(3.5) (11.7) (50.0) (10.6) (17.0) (19.1)
.138 .461 1.969 .531 .862 .941
(3.5) (11.7) (50.0) (13.5) (21.9) (23.9)
.138 .453 2.362 .531 .862 .941
(3.5) (11.5) (60.0) (13.5) (21.9) (23.9)
.138 .453 2.362 .575 .862 .941
(3.5) (11.5) (60.0) (14.6) (21.9) (23.9)
.138 .500 2.559 .736 1.031 1.165
(3.5) (12.7) (65.0) (18.7) (26.2) (29.6)
.138 .500 2.559 .819 1.031 1.165
(3.5) (12.7) (65.0) (20.8) (26.2) (29.6)
.138 .500 2.559 .969 1.358 1.488
(3.5) (12.7) (65.0) (24.6) (34.5) (37.8)
.138 .500 2.559 1.063 1.358 1.488
(3.5) (12.7) (65.0) (27.0) (34.5) (37.8)
.138 .598 2.756 1.311 1.717 1.882
(3.5) (15.2) (70.0) (33.3) (43.6) (47.8)
.138 .598 3.150 1.516 1.717 1.882
(3.5) (15.2) (80.0) (38.5) (43.6) (47.8)
.138 .610 3.150 1.898 2.071 2.276
(3.5) (15.5) (80.0) (48.2) (52.6) (57.8)
J
± .008
(±0.2)
K3
+ .020
(±0.5)
L4
MAX.
Z
MIN.
BB
MAX.
JJ
+ .008
(+0.2)
F L G
L1
B Thread
F
K1
L2
B Thread
K2
F
K2
MIN.
All dimensions in inches (millimeters in parenthesis)
102
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
DIMENSIONS
STYLE 1 CABLE RECEPTACLE
Q
S
N
MP
B
L
L
KK
.6250-24 UNEF 1.087
(27.6)
.7500-20 UNEF 1.087
(27.6)
.8750-20 UNEF 1.087
(27.6)
.8750-20 UNEF 1.331
(33.8)
1.0000-20 UNEF 1.331
(33.8)
1.1250-18 UNEF 1.331
(33.8)
1.2500-18 UNEF 1.331
(33.8)
1.3750-18 UNEF 1.331
(33.8)
1.6250-18 UNEF 1.406
(35.7)
1.8750-16 UN 1.469
(37.3)
2.0625-16 UN 1.469
(37.3)
2.3125-16 UN 1.469
(37.3)
B
THREAD
CLASS 2A
L
+ .012
(+ 0.3)
10SL .717 .717 .110 .811 .992
(18.2) (18.2) (2.8) (20.6) (25.2)
14S .717 .969 .126 1.000 1.173
(18.2) (24.6) (3.2) (25.4) (29.8)
16S .717 1.079 .126 1.126 1.272
(18.2) (27.4) (3.2) (28.6) (32.3)
16 .846 1.079 .126 1.126 1.272
(21.5) (27.4) (3.2) (28.6) (32.3)
18 .907 1.213 .157 1.248 1.370
(23.0) (30.8) (4.0) (31.7) (34.8)
20 .907 1.346 .157 1.374 1.488
(23.0) (34.2) (4.0) (34.9) (37.8)
22 .907 1.472 .157 1.500 1.618
(23.0) (37.4) (4.0) (38.1) (41.1)
24 .907 1.610 .157 1.626 1.756
(23.0) (40.9) (4.0) (41.3) (44.6)
28 .947 1.839 .157 1.874 2.004
(24.1) (46.7) (4.0) (47.6) (50.9)
32 .947 2.102 .157 2.126 2.248
(24.1) (53.4) (4.0) (54.0) (57.1)
36 .947 2.346 .157 2.386 2.504
(24.1) (59.6) (4.0) (60.6) (63.6)
40 .947 2.579 .157 2.618 2.756
(24.1) (65.5) (4.0) (66.5) (70.0)
SHELL
SIZE
M
+.016 -.000
(+0.4 - 0.0)
N
+.000 -.006
(+0.00-0.15)
P
± .008
(±0.2)
Q
± .008
(±0.2)
S
MAX.
1.890 .787
(48.0) (20.0)
1.890 .945
(48.0) (24.0)
1.890 1.024
(48.0) (26.0)
2.205 1.024
(56.0) (26.0)
2.244 1.161
(57.0) (29.5)
2.244 1.299
(57.0) (33.0)
2.244 1.417
(57.0) (36.0)
2.244 1.575
(57.0) (40.0)
2.244 1.811
(57.0) (46.0)
2.362 2.028
(60.0) (51.5)
2.362 2.283
(60.0) (58.0)
2.362 2.539
(60.0) (64.5)
L1
MAX.
KK
MAX.
RV
All dimensions in inches (millimeters in parenthesis)
103
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
DIMENSIONS
STYLE 1 CABLE RECEPTACLE
L
JJBBZ
J
K3
.138 .461 1.969 .303 .524 .610
(3.5) (11.7) (50.0) (7.7) (13.3) (15.5)
.138 .461 1.969 .417 .669 .752
(3.5) (11.7) (50.0) (10.6) (17.0) (19.1)
.138 .461 1.969 .531 .862 .941
(3.5) (11.7) (50.0) (13.5) (21.9) (23.9)
.138 .453 2.362 .531 .862 .941
(3.5) (11.5) (60.0) (13.5) (21.9) (23.9)
.138 .453 2.362 .575 .862 .941
(3.5) (11.5) (60.0) (14.6) (21.9) (23.9)
.138 .500 2.559 .736 1.031 1.165
(3.5) (12.7) (65.0) (18.7) (26.2) (29.6)
.138 .500 2.559 .819 1.031 1.165
(3.5) (12.7) (65.0) (20.8) (26.2) (29.6)
.138 .500 2.559 .969 1.358 1.488
(3.5) (12.7) (65.0) (24.6) (34.5) (37.8)
.138 .500 2.559 1.063 1.358 1.488
(3.5) (12.7) (65.0) (27.0) (34.5) (37.8)
.138 .598 2.756 1.311 1.717 1.882
(3.5) (15.2) (70.0) (33.3) (43.6) (47.8)
.138 .598 3.150 1.516 1.717 1.882
(3.5) (15.2) (80.0) (38.5) (43.6) (47.8)
.138 .610 3.150 1.898 2.071 2.276
(3.5) (15.5) (80.0) (48.2) (52.6) (57.8)
J
± .008
(±0.2)
K3
+ .020
(±0.5)
L4
MAX.
Z
MIN.
BB
MAX.
JJ
+ .008
(+0.2)
.6250-24 UNEF .409 .374 2.110 1.969 3.197
(10.4) (9.5) (53.6) (50.0) (81.2)
.7500-20 UNEF .520 .374 2.145 1.969 3.232
(13.2) (9.5) (54.5) (50.0) (82.1)
.8750-20 UNEF .638 .374 2.145 1.969 3.232
(16.2) (9.5) (54.5) (50.0) (82.1)
.8750-20 UNEF .638 .374 2.240 2.362 3.571
(16.2) (9.5) (56.9) (60.0) (90.7)
1.0000-20 UNEF .756 .374 2.315 2.362 3.646
(19.2) (9.5) (58.8) (60.0) (92.6)
1.1875-18 UNEF .867 .374 2.300 2.362 3.631
(22.0) (9.5) (58.4) (60.0) (92.2)
1.1875-18 UNEF .965 .374 2.305 2.362 3.636
(24.5) (9.5) (58.5) (60.0) (92.4)
1.4375-18 UNEF 1.094 .374 2.320 2.560 3.651
(27.8) (9.5) (58.9) (65.0) (92.7)
1.4375-18 UNEF 1.228 .374 2.490 2.560 3.896
(31.2) (9.5) (63.2) (65.0) (99.0)
1.7500-18 UNS 1.488 .433 2.635 2.560 4.104
(37.8) (11.0) (66.9) (65.0) (104.2)
2.0000-18 UNS 1.780 .465 2.680 3.150 4.149
(45.2) (11.8) (68.1) (80.0) (105.4)
2.2500-16 UN 2.016 .465 2.680 3.150 4.149
(51.2) (11.8) (68.1) (80.0) (105.4)
B
THREAD
CLASS 2A
F
MIN.
K1
MIN.
L3
MAX.
L2
MAX.
G
L1
B Thread
F
K1
F
L2
B Thread
K2
F
L
K2
MAX.
All dimensions in inches (millimeters in parenthesis)
104
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
STYLE 4 RUBBER-COVERED PLUGS
B
L
L
KK
.6250-24 UNEF 1.087
(27.6)
1.0000-20 UNEF 1.331
(33.8)
1.1250-18 UNEF 1.331
(33.8)
1.2500-18 UNEF 1.331
(33.8)
1.3750-18 UNEF 1.331
(33.8)
1.6250-18 UNEF 1.406
(35.7)
1.8750-16 UN 1.469
(37.3)
2.0625-16 UN 1.469
(37.3)
2.3125-16 UN 1.469
(37.3)
B
THREAD
CLASS 2A
L
+ .012
(+ 0.3)
SHELL
SIZE
Q
MAX.
S
MAX.
1.417 .787
(36.0) (20.0)
1.929 1.161
(49.0) (29.5)
1.969 1.299
(50.0) (33.0)
1.969 1.417
(50.0) (36.0)
2.008 1.575
(51.0) (40.0)
2.008 1.811
(51.0) (46.0)
2.087 2.028
(53.0) (51.5)
2.106 2.283
(53.5) (58.0)
2.126 2.539
(54.0) (64.5)
L1
MAX.
KK
MAX.
Q
S
10SL 1.319 1.122
(33.5) (28.5)
18 1.929 1.713
(49.0) (43.5)
20 2.028 1.811
(51.5) (46.0)
22 2.224 1.988
(56.5) (50.5)
24 2.362 2.126
(60.0) (54.0)
28 2.638 2.402
(67.0) (61.0)
32 2.992 2.661
(76.0) (67.6)
36 3.240 2.925
(82.3) (74.3)
40 3.465 3.150
(88.0) (80.0)
DIMENSIONS
All dimensions in inches (millimeters in parenthesis)
RV
105
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
STYLE 4 RUBBER-COVERED PLUGS
L
JJBBZ
J
K3
3
.138 .461 1.969 .303 .524 .610
(3.5) (11.7) (50.0) (7.7) (13.3) (15.5)
.138 .453 2.362 .575 .862 .941
(3.5) (11.5) (60.0) (14.6) (21.9) (23.9)
.138 .500 2.559 .736 1.031 1.165
(3.5) (12.7) (65.0) (18.7) (26.2) (29.6)
. .138 .500 2.559 .819 1.031 1.165
(3.5) (12.7) (65.0) (20.8) (26.2) (29.6)
.138 .500 2.559 .969 1.358 1.488
(3.5) (12.7) (65.0) (24.6) (34.5) (37.8)
. .138 .500 2.559 1.063 1.358 1.488
(3.5) (12.7) (65.0) (27.0) (34.5) (37.8)
.138 .598 2.756 1.311 1.717 1.882
(3.5) (15.2) (70.0) (33.3) (43.6) (47.8)
.138 .598 3.150 1.516 1.717 1.882
(3.5) (15.2) (80.0) (38.5) (43.6) (47.8)
.138 .610 3.150 1.898 2.071 2.276
(3.5) (15.5) (80.0) (48.2) (52.6) (57.8)
J
± .008
(±0.2)
K3
+ .020
(±0.5)
L4
MAX.
Z
MIN.
BB
MAX.
.6250-24 UNEF .409 .374 2.110 1.969 3.197
(10.4) (9.5) (53.6) (50.0) (81.2)
1.0000-20 UNEF .756 .374 2.315 2.362 3.646
(19.2) (9.5) (58.8) (60.0) (92.6)
1.1875-18 UNEF .867 .374 2.300 2.362 3.631
(22.0) (9.5) (58.4) (60.0) (92.2)
1.1875-18 UNEF .965 .374 2.305 2.362 3.636
(24.5) (9.5) (58.5) (60.0) (92.4)
1.4375-18 UNEF 1.094 .374 2.320 2.560 3.651
(27.8) (9.5) (58.9) (65.0) (92.7)
1.4375-18 UNEF 1.228 .374 2.490 2.560 3.896
(31.2) (9.5) (63.2) (65.0) (99.0)
1.7500-18 UNS 1.488 .433 2.635 2.560 4.104
(37.8) (11.0) (66.9) (65.0) (104.2)
2.0000-18 UNS 1.780 .465 2.680 3.150 4.149
(45.2) (11.8) (68.1) (80.0) (105.4)
2.2500-16 UN 2.016 .465 2.680 3.150 4.149
(51.2) (11.8) (68.1) (80.0) (105.4)
B
THREAD
CLASS 2A
F
MIN.
K1
MIN.
L2
MAX.
L3
MAX.
DIMENSIONS
JJ
+ .008
(+0.2)
L1
B Thread
F
K1
L2
B Thread
K2
F
K2
MIN.
All dimensions in inches (millimeters in parenthesis)
G
L
F
106
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
DIMENSIONS
STYLE 6, 6HD PLUGS
Q1Q2
B
L
L
KK
.6250-24 UNEF 1.087
(27.6)
.7500-20 UNEF 1.087
(27.6)
.8750-20 UNEF 1.087
(27.6)
.8750-20 UNEF 1.331
(33.8)
1.0000-20 UNEF 1.331
(33.8)
1.1250-18 UNEF 1.331
(33.8)
1.2500-18 UNEF 1.331
(33.8)
1.3750-18 UNEF 1.331
(33.8)
1.6250-18 UNEF 1.406
(35.7)
1.8750-16 UN 1.469
(37.3)
2.0625-16 UN 1.469
(37.3)
2.3125-16 UN 1.469
(37.3)
B
THREAD
CLASS 2A
L
+ .012
(+ 0.3)
10SL .898 1.007
(22.8) (25.5)
14S 1.150 1.259
(29.2) (31.9)
16S 1.260 1.410
(32.0) (35.8)
16 1.260 1.410
(32.0) (35.8)
18 1.437 1.547
(36.5) (39.2)
20 1.571 1.681
(39.9) (42.6)
22 1.697 1.847
(43.1) (46.9)
24 1.835 1.965
(46.6) (49.9)
28 2.102 2.222
(53.4) (56.4)
32 2.366 2.482
(60.1) (63.0)
36 2.610 2.721
(66.3) (69.1)
40 2.850 2.953
(72.4) (75.0)
SHELL
SIZE
Q1
MAX.
Q2
MAX.
1.417 .787
(36.0) (20.0)
1.437 .945
(36.5) (24.0)
1.437 1.024
(36.5) (26.0)
1.929 1.024
(49.0) (26.0)
1.929 1.161
(49.0) (29.5)
1.969 1.299
(50.0) (33.0)
1.969 1.417
(50.0) (36.0)
2.008 1.543
(51.0) (39.2)
2.008 1.811
(51.0) (46.0)
2.087 2.028
(53.0) (51.5)
2.106 2.283
(53.5) (58.0)
2.126 2.539
(54.0) (64.5)
L1
MAX.
KK
MAX.
6RV
6HD
All dimensions in inches (millimeters in parenthesis)
107
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
DIMENSIONS
STYLE 6, 6HD PLUGS
L
JJBBZ
J
K3
3
.138 .461 1.969 .303 .524 .610
(3.5) (11.7) (50.0) (7.7) (13.3) (15.5)
.138 .461 1.969 .417 .669 .752
(3.5) (11.7) (50.0) (10.6) (17.0) (19.1)
.138 .461 1.969 .531 .862 .941
(3.5) (11.7) (50.0) (13.5) (21.9) (23.9)
.138 .453 2.362 .531 .862 .941
(3.5) (11.5) (60.0) (13.5) (21.9) (23.9)
.138 .453 2.362 .575 .862 .941
(3.5) (11.5) (60.0) (14.6) (21.9) (23.9)
.138 .500 2.559 .736 1.031 1.165
(3.5) (12.7) (65.0) (18.7) (26.2) (29.6)
.138 .500 2.559 .819 1.031 1.165
(3.5) (12.7) (65.0) (20.8) (26.2) (29.6)
.138 .500 2.559 .969 1.358 1.488
(3.5) (12.7) (65.0) (24.6) (34.5) (37.8)
.138 .500 2.559 1.063 1.358 1.488
(3.5) (12.7) (65.0) (27.0) (34.5) (37.8)
.138 .598 2.756 1.311 1.717 1.882
(3.5) (15.2) (70.0) (33.3) (43.6) (47.8)
.138 .598 3.150 1.516 1.717 1.882
(3.5) (15.2) (80.0) (38.5) (43.6) (47.8)
.138 .610 3.150 1.898 2.071 2.276
(3.5) (15.5) (80.0) (48.2) (52.6) (57.8)
J
± .008
(±0.2)
K3
+ .020
(±0.5)
L4
MAX.
Z
MIN.
BB
MAX.
JJ
+ .008
(+0.2)
.6250-24 UNEF .409 .374 2.110 1.969 3.197
(10.4) (9.5) (53.6) (50.0) (81.2)
.7500-20 UNEF .520 .374 2.145 1.969 3.232
(13.2) (9.5) (54.5) (50.0) (82.1)
.8750-20 UNEF .638 .374 2.145 1.969 3.232
(16.2) (9.5) (54.5) (50.0) (82.1)
.8750-20 UNEF .638 .374 2.240 2.362 3.571
(16.2) (9.5) (56.9) (60.0) (90.7)
1.0000-20 UNEF .756 .374 2.315 2.362 3.646
(19.2) (9.5) (58.8) (60.0) (92.6)
1.1875-18 UNEF .867 .374 2.300 2.362 3.631
(22.0) (9.5) (58.4) (60.0) (92.2)
1.1875-18 UNEF .965 .374 2.305 2.362 3.636
(24.5) (9.5) (58.5) (60.0) (92.4)
1.4375-18 UNEF 1.094 .374 2.320 2.560 3.651
(27.8) (9.5) (58.9) (65.0) (92.7)
1.4375-18 UNEF 1.228 .374 2.490 2.560 3.896
(31.2) (9.5) (63.2) (65.0) (99.0)
1.7500-18 UNS 1.488 .433 2.635 2.560 4.104
(37.8) (11.0) (66.9) (65.0) (104.2)
2.0000-18 UNS 1.780 .465 2.680 3.150 4.149
(45.2) (11.8) (68.1) (80.0) (105.4)
2.2500-16 UN 2.016 .465 2.680 3.150 4.149
(51.2) (11.8) (68.1) (80.0) (105.4)
B
THREAD
CLASS 2A
F
MIN.
K1
MIN.
K2
MIN.
L2
MAX.
L3
MAX.
L1
B Thread
F
K1
L2
B Thread
K2
F
All dimensions in inches (millimeters in parenthesis)
G
LF
108
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
DIMENSIONS
PLUG STYLE 6, 6HD RIGHT ANGLE
J
L
F
B
Q1Q2
10SL .898 1.007
(22.8) (25.5)
14S 1.150 1.259
(29.2) (31.9)
16S 1.260 1.410
(32.0) (35.8)
16 1.260 1.410
(32.0) (35.8)
18 1.437 1.547
(36.5) (39.2)
20 1.571 1.681
(39.9) (42.6)
22 1.697 1.847
(43.1) (46.9)
24 1.835 1.965
(46.6) (49.9)
28 2.102 2.222
(53.4) (56.4)
32 2.366 2.482
(60.1) (63.0)
36 2.610 2.721
(66.3) (69.1)
40 2.850 2.953
(72.4) (75.0)
SHELL
SIZE
Q1
MAX.
Q2
MAX.
B THREAD
CLASS 2A
F
MAX.
J
MIN.
K
MAX.
L
MAX.
.6250-24 UNEF .337 .370 1.181 1.772
(8.5) (9.4) (30.0) (45.0)
.7500-20 UNEF .462 .370 1.181 1.850
(11.7) (9.4) (30.0) (47.0)
.8750-20 UNEF .587 .370 1.181 1.890
(14.9) (9.4) (30.0) (48.0)
.8750-20 UNEF .587 .370 1.181 2.244
(14.9) (9.4) (30.0) (57.0)
1.0000-20 UNEF .685 .370 1.378 2.283
(17.4) (9.4) (35.0) (58.0)
1.1875-18 UNEF .810 .370 1.378 2.402
(20.5) (9.4) (35.0) (61.0)
1.1875-18 UNEF .915 .370 1.378 2.402
(23.2) (9.4) (35.0) (61.0)
1.4375-18 UNEF 1.025 .370 1.575 2.598
(26.0) (9.4) (40.0) (66.0)
1.4375-18 UNEF 1.139 .370 1.575 2.598
(28.9) (9.4) (40.0) (53.4)
1.7500-18 UNS 1.447 .433 1.772 2.835
(36.7) (11.0) (45.0) (72.0)
2.0000-18 UNS 1.687 .496 1.969 2.953
(42.8) (12.6) (50.0) (75.0)
2.2500-16 UN 1.923 .496 2.165 3.071
(48.8) (12.6) (55.1) (78.0)
6T
6HD
All dimensions in inches (millimeters in parenthesis)
109
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
SHELL
SIZE
P
±.008
(±0.2)
R
±.004
(±0.1)
S
± .012
(±0.3)
T
+.004-.000
(+0.1-0.0)
L
APPROX.
10SL 1.087 .898 .110 .717 1.000 .126
(27.6) (22.8) (2.8) (18.2) (25.4) (3.2)
14S 1.091 1.150 .126 .906 1.181 .126
(27.7) (29.2) (3.2) (23.0) (30.0) (3Í.2)
16S 1.091 1.260 .126 .969 1.280 .126
(27.7) (32.0) (3.2) (24.6) (32.5) (3.2)
16 1.469 1.260 .126 .969 1.280 .126
(37.3) (32.0) (3.2) (24.6) (32.5) (3.2)
18 1.500 1.437 .157 1.063 1.378 .126
(38.1) (36.5) (4.0) (27.0) (35.0) (3.2)
20 1.500 1.571 .157 1.157 1.496 .126
(38.1) (39.9) (4.0) (29.4) (38.0) (3.2)
22 1.500 1.697 .157 1.252 1.614 .126
(38.1) (43.1) (4.0) (31.8) (41.0) (3.2)
24 1.598 1.835 .157 1.374 1.752 .146
(40.6) (46.6) (4.0) (34.9) (44.5) (3.7)
28 1.626 2.102 .157 1.563 2.000 .146
(41.3) (53.4) (4.0) (39.7) (50.8) (3.7)
32 1.764 2.366 .157 1.752 2.244 .169
(44.8) (60.1) (4.0) (44.5) (57.0) (4.3)
36 1.764 2.610 .157 1.937 2.500 .169
(44.8) (66.3) (4.0) (49.2) (63.5) (4.3)
40 1.764 2.850 .157 2.185 2.752 .169
(44.8) (72.4) (4.0) (55.5) (69.9) (4.3)
Q
MAX.
DIMENSIONS
6B PANEL PLUG
P
Q
L
N N
PM
L
S
R
SR
T
R
RS
S
T
P
±.008
(±0.2)
R
±.004
(±0.1)
S
±.012
(±0.3)
T
+.004 -.000
(+0.1-0.0)
1.488 .717 .717 .110 .717 1.000 .126
(37.7) (18.2) (18.2) (2.8) (18.2) (25.4) (3.2)
1.488 .717 .969 .126 .906 1.181 .126
(37.7) (18.2) (24.6) (3.2) (23.0) (30.0) (3.2)
1.488 .717 1.079 .126 .969 1.280 .126
(37.7) (18.2) (24.6) (3.2) (23.0) (30.0) (3.2)
2.049 .846 1.079 .126 .969 1.280 .126
(52.0) (21.5) (27.4) (3.2) (24.6) (32.5) (3.2)
2.049 .907 1.213 .157 1.063 1.378 .126
(52.0) (23.0) (30.8) (4.0) (27.0) (35.0) (3.2)
2.049 .907 1.346 .157 1.157 1.496 .126
(52.0) (23.0) (34.2) (4.0) (29.4) (38.0) (3.2)
2.049 .907 1.472 .157 1.252 1.614 .126
(52.0) (23.0) (37.4) (4.0) (31.8) (41.0) (3.2)
2.049 .907 1.610 .157 1.374 1.752 .146
(52.0) (23.0) (40.9) (4.0) (34.9) (44.5) (3.7)
2.049 .947 1.839 .157 1.563 2.000 .146
(52.0) (24.0) (46.7) (4.0) (39.7) (50.8) (3.7)
2.049 .947 2.102 .157 1.752 2.244 .169
(52.0) (24.0) (53.4) (4.0) (44.5) (57.0) (4.3)
2.049 .947 2.346 .157 1.937 2.500 .169
(52.0) (24.0) (59.6) (4.0) (49.2) (63.5) (4.3)
2.049 .947 2.579 .157 2.185 2.752 .169
(52.0) (24.0) (65.5) (4.0) (55.5) (69.9) (4.3)
L
MAX.
M
+.016-.000
(+0.4-0.0)
N
+.000-.006
(+0.00-0.15)
STYLE TB THRU-BULKHEAD RECEPTACLE
TB6B
All dimensions in inches (millimeters in parenthesis)
110
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
All dimensions in inches (millimeters in parenthesis)
SHELL
SIZE
10SL .8750-20 UNEF .441 .094 .205 1.425 .965 .717 .157 1.062 1.252 .6250-24 UNEF
(11.2) (2.4) (5.2) (36.2) (24.5) (18.2) (4.0) (27.0) (31.8)
14S 1.1250-18 UNEF .575 .094 .295 1.531 1.055 .969 .189 1.312 1.626 .7500-20 UNEF
(14.6) (2.4) (7.5) (38.9) (26.8) (24.6) (4.8) (33.3) (41.3)
16S 1.2500-18 UNEF .618 .094 .295 1.531 1.055 1.079 .189 1.500 1.748 .8750-20 UNEF
(15.7) (2.4) (7.5) (38.9) (26.8) (27.4) (4.8) (38.1) (44.4)
16 1.2500-18 UNEF .618 .094 .295 1.909 1.264 1.079 .189 1.500 1.748 .8750-20 UNEF
(15.7) (2.4) (7.5) (48.5) (32.1) (27.4) (4.8) (38.1) (44.4)
18 1.3750-18 UNEF .661 .094 .354 1.941 1.327 1.213 .189 1.562 1.874 1.0000-20 UNEF
(16.8) (2.4) (9.0) (49.3) (33.7) (30.8) (4.8) (39.7) (47.6)
20 1.5000-18 UNEF .709 .094 .358 1.941 1.327 1.346 .189 1.750 2.000 1.1250-18 UNEF
(18.0) (2.4) (9.1) (49.3) (33.7) (34.2) (4.8) (44.5) (50.8)
22 1.6250-18 UNEF .795 .094 .358 1.941 1.327 1.472 .189 2.000 2.134 1.2500-18 UNEF
(20.2) (2.4) (9.1) (49.3) (33.7) (37.4) (4.8) (50.8) (54.2)
24 1.7500-18 UNEF .795 .094 .358 1.953 1.327 1.610 .189 2.000 2.252 1.3750-18 UNEF
(20.2) (2.4) (9.1) (49.6) (33.7) (40.9) (4.8) (50.8) (57.2)
28 2.0000-18 UNS .886 .094 .394 2.043 1.386 1.839 .220 2.188 2.500 1.6250-18 UNEF
(22.5) (2.4) (10.0) (51.9) (35.2) (46.7) (5.6) (55.6) (63.5)
32 2.2500-16 UN .972 .094 .394 2.043 1.386 2.102 .220 2.438 2.748 1.8750-16 UN
(24.7) (2.4) (10.0) (51.9) (35.2) (53.4) (5.6) (61.9) (69.8)
36 2.5000-16 UN 1.059 .094 .327 2.043 1.386 2.346 .220 2.812 3.000 2.0625-16 UN
(26.9) (2.4) (8.3) (51.9) (35.2) (59.6) (5.6) (71.4) (76.2)
40 2.7500-16 UN 1.165 .094 .327 2.043 1.386 2.579 .220 2.953 3.248 2.3125-16 UN
(29.6) (2.4) (8.3) (51.9) (35.2) (65.5) (5.6) (75.0) (82.5)
L
± .010
(±0.3)
M
± .012
(±0.3)
N
+.000-.1006
(+0.00-0.15)
J
WALL THICKNESS
MIN. MAX.
G
±.012
(±0.3)
B
THREAD
CLASS 2A
P
± .007
(±0.2)
R
± .016
(±0.4)
S
± .12
(±0.3)
DIMENSIONS
STYLE 7, 70 JAM NUT RECEPTACLES
G
S
S
G
R
BB
THREAD
CLASS 2A
7 70
111
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
DIMENSIONS
PANEL CUTOUTS
SHELL 7/70 PANEL CUTOUT
SIZE F - FLAT D - DIAMETER
10SL 0.830 (21.1) 0.875 (22.2)
14S 1.080 (27.4) 1.125 (28.6)
16S/16 1.210 (30.7) 1.250 (31.7)
18 1.320 (33.5) 1.375 (34.9)
20 1.450 (36.8) 1.500 (38.1)
22 1.570 (39.9) 1.625 (41.3)
24 1.700 (43.2) 1.750 (44.5)
28 1.950 (49.5) 2.000 (50.8)
32 2.200 (55.9) 2.250 (57.2)
36 2.450 (62.2) 2.500 (63.5)
40 2.700 (68.6) 2.750 (69.9)
10SL .303 (7.70)
14S .303 (7.70)
16S .303 (7.70)
16 .242 (6.15)
18 .303 (7.70)
20 .303 (7.70)
22 .303 (7.70)
24 .303 (7.70)
28 .343 (8.70)
32 .309 (7.85)
36 .309 (7.85)
40 .309 (7.85)
PANEL THICKNESS
Dim. J-flange in front of panel
Dim. K-flange at rear of panel
See sealing screws on apage 439.
SHELL REAR
SIZE MOUNT
Rear Mount
D
All dimensions in inches (millimeters in parenthesis)
SHELL SIZE STYLE 0, 2, 20, 30, TB FLANGE
G (TP) MOUNTING
HOLE DIAMETER
H
J FRONT K REAR
10SL 0.717 (18.2) 0.126 (3.2) 0.688 (17.5) 0.750 (19.1)
14S 0.906 (23.0) 0.126 (3.2) 0.813 (20.7) 1.000 (25.4)
16S 0.969 (24.6) 0.126 (3.2) 0.938 (23.8) 1.125 (28.6)
16 0.969 (24.6) 0.126 (3.2) 0.938 (23.8) 1.125 (28.6)
18 1.063 (27.0) 0.126 (3.2) 1.063 (27.0) 1.250 (26.7)
20 1.157 (29.4) 0.126 (3.2) 1.188 (30.2) 1.375 (35.0)
22 1.252 (31.8) 0.126 (3.2) 1.313 (33.4) 1.500 (38.1)
24 1.374 (34.9) 0.146 (3.7) 1.438 (36.5) 1.625 (41.3)
28 1.563 (39.7) 0.146 (3.7) 1.688 (42.9) 1.875 (47.6)
32 1.752 (44.5) 0.169 (4.3) 1.938 (49.2) 2.125 (54.0)
36 1.937 (49.2) 0.169 (4.3) 2.125 (54.0) 2.375 (60.3)
40 2.185 (55.5) 0.169 (4.3) 2.375 (60.3) 2.625 (66.7)
112
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
ACCESSORIES
MS3057-A CABLE CLAMP
MS3057-C WATERPROOF CABLE CLAMP
Standard MS3057-C waterproof cable clamp with mechanical strain
relief for use with styles F, L and T endbells. Internal neoprene gland and
compression ring will seal a broad range of round cable diameters as listed
below. For reduction of cable diameters, order the appropriate MS3420A
bushing in table.
SHELL WIRE DIAMETER INCHES (MM) OPTIONAL BUSHINGS
SIZE PART NUMBER MAX. MIN. PART NUMBER MAX. WIRE DIA. (MM)
10SL MS3057-4C 0.312 (7.93) 0.188 (4.80) MS3420-4A 0.219 (5.56)
14S MS3057-6C 0.438 (11.12) 0.281 (7.10) MS3420-6A 0.312 (7.93)
MS3420-4A 0.219 (5.56)
16/16S MS3057-8C 0.530 (13.48) 0.312 (7.90) MS3420-8A 0.438 (11.10)
MS3420-6A 0.312 (7.93)
18 MS3057-10C 0.625 (15.87) 0.375 (9.50) MS3420-10A 0.438 (11.10)
MS3420-6A 0.312 (7.93)
20/22 MS3057-12C 0.750 (19.00) 0.500 (12.70) MS3420-12A 0.540 (13.74)
MS3420-8A 0.438 (11.10)
24/28 MS3057-16C 0.940 (23.8) 0.625 (15.90) MS3420-16A 0.750 (19.00)
MS3420-12A 0.540 (13.74)
MS3420-8A 0.438 (11.10)
32 MS3057-20C 1.25 (31.75) 0.921 (23.40) MS3420-20A 0.938 (23.80)
MS3420-16A 0.750 (19.00)
MS3420-12A 0.540 (13.74)
36 MS3057-24C 1.38 (35.00) 1.00 (25.40) MS3420-24A 1.12 (28.5)
MS3420-18A 0.938 (23.80)
MS3420-16A 0.750 (19.00)
40 MS3057-28C 1.62 (41.25) 1.25 (31.80) MS3420-28A 1.25 (31.75)
MS3420-20A 0.940 (23.80)
MS3420-16A 0.750 (19.00)
Standard MS3057 cable clamps have dual-clamping action to provide a balanced, positive hold on
the wires and greatly reduce moisture transmission. This cable clamp accepts MS3420 bushings.
MS3420 bushings can be nested to reduce the inside diameter to more closely match the diameter
of the cable or wire bundle.
STANDARD CLAMP
ALUMINUM W/ MAXIMUM
SHELL THREAD LOW-COST ALUMINUM W/ STAINLESS STEEL CABLE DIAMETER
SIZE CLASS 2B CAST ZINC BRASS SCREWS SCREWS INCH (MM)
10SL 5/8-24UNEF 97-3057-1004** MS3057-4A M85049/41-4A 0.312 (7.92)
14S 3/4-20UNEF 97-3057-1007** MS3057-6A M85049/41-6A 0.438 (11.10)
16/16S 7/8-20UNEF 97-3057-1008** MS3057-8A M85049/41-8A 0.562 (14.27)
18 1-20UNEF 97-3057-1010** MS3057-10A M85049/41-10A 0.625 (15.88)
20/22 1 3/16-18UNEF 97-3057-1012** MS3057-12A M85049/41-12A 0.750 (19.05)
24/28 1 7/16-18UNEF 97-3057-1016** MS3057-16A M85049/41-16A 0.938 (23.80)
32 1 3/4-18UNS 97-3057-1020** MS3057-20A M85049/41-20A 1.250 (31.75)
36 2-18UNS 97-3057-1024** MS3057-24A M85049/41-24A 1.375 (34.92)
40 2 1/4-16UNS - MS3057-28A M85049/41-28A 1.625 (41.28)
STANDARD CLAMP AND TELESCOPIC BUSHING
LOW-COST
ZINC WITH BUSHING BUSHING ID
BUSHING INCLUDED INCH (MM)
97-3057-1004-1 MS3420-4 0.220 (5.6)
97-3057-1007-1 MS3420-6 0.312 (7.9)
97-3057-1008-1 MS3420-8 0.437 (11.1)
97-3057-1010-1 MS3420-10 0.562 (14.3)
97-3057-1012-1 MS3420-12 0.625 (15.9)
97-3057-1016-1 MS3420-16, -12 0.625 (15.9)
97-3057-1020-1 MS3420-20, -16 0.750 (19.1)
97-3057-1024-1 MS3420-24, -20 0.937 (23.8)
- - -
All dimensions in inches (millimeters in parenthesis)
** Other platings are available. aSee page 17 for alternate platings.
113
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
SHELL SIZE INCHES (mm) (mm)
INCHES
CABLE CLAMP
PART NUMBER
MAX. CABLE OD MIN. CABLE OD THREAD
CLASS 2B
10SL 9767-12-4 0.219 (5.55) 0.020 (0.51) 5/8-24 UNEF
14S 9767-14-4 0.219 (5.55) 0.020 (0.51) 3/4-20 UNEF
14S 9767-14-6 0.344 (8.73) 0.176 (4.47) 3/4-20 UNEF
16S/16 9767-16-4 0.219 (5.55) 0.020 (0.51) 7/8-20 UNEF
16S/16 9767-16-6 0.344 (8.73) 0.176 (4.47) 7/8-20 UNEF
16S/16 9767-16-8 0.438 (11.12) 0.177 (4.50) 7/8-20 UNEF
18 9767-18-6 0.344 (8.73) 0.176 (4.47) 1-20 UNEF
18 9767-18-8 0.438 (11.12) 0.177 (4.50) 1-20 UNEF
18 9767-18-10 0.563 (14.29) 0.292 (7.42) 1-20 UNEF
20/22 9767-22-8 0.438 (11.12) 0.177 (4.50) 1-3/16-18 UNEF
20/22 9767-22-10 0.563 (14.29) 0.292 (7.42) 1-3/16-18 UNEF
20/22 9767-22-12 0.688 (17.46) 0.370 (9.40) 1-3/16-18 UNEF
24/28 9767-28-10 0.563 (14.29) 0.292 (7.42) 1-7/16-18 UNEF
24/28 9767-28-12 0.688 (17.46) 0.370 (9.40) 1-7/16-18 UNEF
24/28 9767-28-16 0.844 (21.43) 0.536 (13.61) 1-7/16-18 UNEF
32 9767-32-20 1.031 (26.19) 0.590 (14.99) 1-3/4-18 UNS
36 9767-36-16 0.844 (21.43) 0.536 (13.61) 2-18 UNS
ACCESSORIES
9767 CABLE CLAMPS
SIZE FITS IN
CABLE CLAMP
INSIDE
DIAMETER
INSIDE
DIAMETER
1ST BUSHING
PART NUMBER
2ND NESTED
BUSHING
10SL MS3420-4 .220 (5.59) NONE - MS3057-4A
14S MS3420-6 .312 (7.92) NONE - MS3057-6A
16S MS3420-8 .437 (11.10) NONE - MS3057-8A
16 MS3420-8 .437 (11.10) NONE - MS3057-8A
18 MS3420-10 .562 (14.30) NONE - MS3057-10A
20 MS3420-12 .625 (15.90) NONE - MS3057-12A
22 MS3420-12 .625 (15.90) NONE - MS3057-12A
24 MS3420-16 .750 (19.05) MS3420-12 .625 (15.90) MS3057-16A
28 MS3420-16 .750 (19.05) MS3420-12 .625 (15.90) MS3057-16A
32 MS3420-20 .937 (23.80) MS3420-16 .750 (19.05) MS3057-20A
36 MS3420-24 1.250 (31.75) MS3420-20 .937 (23.80) MS3057-24A
40 MS3420-28 1.375 (34.92) MS3420-24 1.250 (31.75) SE96-28A4
For use with style-A cable clamps and AIT/MS style-E/F endbells to resist dust, dirt
and oil. Bushings can be nested, one inside the other, to reduce the inside diameter
and form a better seal against the cable jacket. Each bushing will accept the next
smallest bushing.
MS3420 TELESCOPING BUSHINGS
9767 waterproof cable clamp with mechanical strain relief. An internal neoprene gland seal bushing and compression
washer will seal a broad range of round cable diameters, as listed below.
For use with MS3057-C cable clamps (style-C) to reduce the wire sealing diameter.
Bushings can be nested, one inside the other, to progressively reduce the inside
diameter of the cable clamp. The column labeled “re duction bushings” shows the
acceptable nesting options for each clamp.
MS3420-A REDUCTION BUSHINGS
All dimensions in inches (millimeters in parenthesis)
114
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
Metal dust caps are used to protect the contacts when the connectors are left unmated. Dust caps come with metal chain lanyards.
Dummy Receptacles are for front or rear-panel mounting. AIB/GT Series connectors have bayonet ramps. The center of the connector is
closed. Dummy receptacles mount on the same centers and have the same outside dimensions as a STYLE 2 receptacle. A version with
a clearance hole through the middle of the connector is also available. Contact us for ordering information.
D9
ACCESSORIES
Synthetic rubber gaskets are used to ensure a moisture-tight seal between a receptacle and the panel.
Gaskets are available for front or rear-panel mounting of styles 0, 2, 20, 30 and TB connectors. Gasket
thickness is approximately .031 inches (1 mm), for nonconductive and low-temperature types.
Conductive shielding gaskets contain an embedded metal screen for EMI/RFI shielding in addition to moisture
sealing. Gaskets are available for front or rear-panel mounting of styles 30 and TB connectors. Gasket thickness
is .020 inches (.5 mm).
GASKETS
NON-CONDUCTIVE
LOW-TEMPERATURE
CONDUCTIVE
SHELL SIZE NON-CONDUCTIVE
10SL 10-040450-010 10-040450-10S 10-036675-010 10-580649-011
14S 10-040450-014 10-040450-14S 10-036675-014 10-580649-014
16S 10-040450-016 10-040450-16S 10-036675-016 10-580649-016
16 10-040450-016 10-040450-16S 10-036675-016 10-580649-016
18 10-040450-018 10-040450-18S 10-036675-018 10-580649-018
20 10-040450-020 10-040450-20S 10-036675-020 10-580649-020
22 10-040450-022 10-040450-22S 10-036675-022 10-580649-022
24 10-040450-024 10-040450-24S 10-036675-024 10-580649-024
28 10-040450-028 10-040450-28S 10-036675-028 10-580649-028
32 10-040450-032 10-040450-32S 10-036675-032 10-580649-032
36 10-040450-036 10-040450-36S 10-036675-036 10-580649-036
40 10-040450-040 10-040450-40S 10-036675-040 10-580649-040
METAL DUST CAPS WITH SASH CHAIN
10SL 10-580903-11* 10-580902-11* 10-580595-11* 10-564843-101
14S 10-580903-14* 10-580902-14* 10-580595-14* 10-564843-141
16S 10-580903-16* 10-580902-16* 10-580595-16* 10-564843-161
16 10-580903-17* 10-580902-17* 10-580595-17* 10-564843-161
18 10-580903-18* 10-580902-18* 10-580595-18* 10-564843-181
20 10-580903-20* 10-580902-20* 10-580595-20* 10-564843-201
22 10-580903-22* 10-580902-22* 10-580595-22* 10-564843-221
24 10-580903-24* 10-580902-24* 10-580595-24* 10-564843-241
28 10-580903-28* 10-580902-28* 10-580595-28* 10-564843-281
32 10-580903-32* 10-580902-32* 10-580595-32* 10-564843-321
36 10-580903-36* 10-580902-36* 10-580595-36* 10-564843-161
40 10-580903-40* 10-580902-40* 10-580595-40* 10-564843-401
SHELL
SIZE
PLUG CAP RECEPTACLE PLUG SEAL RINGDUMMY RECEPTACLES
DUST CAPS
FRONT MOUNT REAR MOUNT
1,8 ±0,2
3 ±0,2
*Select code for plating:
Z = Black anodize
3 = Olive drab cadmium plate
9 = Olive drab cadmium nickel base
G = Electroless nickel
U = Green zinc
Y = Black alloy
115
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
ASSEMBLY INSTRUCTIONS
LOCK PIN
DIAL
STEP 1: Slide
the rear
accessories over
the wire bundle
in the proper
sequence for
re-assembly: cable
clamp and/or
endbell first, then
ferrule and (if used)
coupling nut.
STEP 2: Insert
individual wires
through the
proper holes in
the grommet.
Use isopropyl
alcohol as a
lubricant.
STEP 3:
Solder wires
to appropriate
contacts on
the rear of the
connector.
Information on
standard soldering
practices is
available upon
request. Please
contact us.
STEP 4: Fixture
the connector
for reassembly
using the endbell
assembly tools
on apage 122
STEP 5: Slide
the grommet
down the wires
(lubricating the
grommet with
isopropyl alcohol
will help).
STEP 6: Fill all
unused grommet
cavities with a
wire hole filler
to maintain the
sealing integrity
of the connector.
STEP 7:
Slide coupling
nut, ferrule,
and endbell
accessories
over rear of the
connector and
tighten. For
tooling, a see
page 122.
SOLDER CONTACTS
LOCATOR
INDEX MARK
LOCATOR
COLOR CODE
LATCH
TURRET
PIN
LOCATOR
COLOR
CONTACT
SIZE
16S Red Red
16 Blue Green
12 Green Green
SOCKET
LOCATOR
COLOR
CRIMP TOOL OPERATION NOTE: Hand-crimp tools can be used with size 16S, 16 & 12 contacts. Size 8, 4 and 0 contacts
require the use of air-powered crimp tools. Contact us for assistance in the use of these tools.
STEP 1: Strip the wires to the appropriate
length. See strip lengths on the Contact
Selection Guide,asee page 94.
STEP 2: Open the crimp tool by squeezing
the handles. Push the latch on the turret to
pop up the locator. Attach the turret to the
crimp tool using the two captive hex bolts
in the turret.
STEP 3: Select the proper locator position
for your contact by rotating the locator until
the proper color is aligned with the index
mark. Push locator back down until
it snaps into position.
LATCH CRIMP
TOOL
LOCATOR
STEP 4: Adjust dial for proper wire gauge.
To change the dial setting, remove the lock
pin and lift center of dial. Turn to the desired
wire gauge. Replace lock pin on dial.
STEP 5: Cycle the tool before inserting the
contact to be sure the tool is in the open
position. Drop the contact, mating end first,
into the crimp cavity of the tool. Squeeze
the tool handle just enough to grip the
contact without actually crimping it.
STEP 6: Insert the stripped wire into the
contact with a slight twisting motion. Be
sure all wire strands are inside the contact.
Squeeze the handle to cycle the tool. The
handle will not release until the contact is
completely crimped.
116
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
WIRE
CRIMP
CHECK TO BE SURE CONDUCTOR IS VISIBLE THROUGH
WIRE INSPECTION HOLE
STEP 7: Remove the crimped contact. Pull on the wire
slightly to be sure it is properly crimped. Be sure the contact
is not bent or damaged in any way. Visually inspect the crimp.
MICRO-SECTIONS: Enlargement of micro-section permits
a final inspection of crimp quality. This test is recommended
whenever new tools or new types of wire or contacts are used.
Initial minimum pullout force in lbs. (before conditioning)
SIZE WIRE GAUGE LB.
16 20 20
18 40
16 50
12 14 70
12 110
8 8 185
4 4 450
0 0 800
CRIMP TOOL OPERATION (CONTINUED) CRIMP TENSILE STRENGTH
INSULATION SHOULD PRESS UP AGAINST THE END OF THE CONTACT.
GUIDE
(PILOT) PIN
SHOULDER
INSERTION
TOOL
INSERTION OF CONTACTS
ASSEMBLY
FIXTURE
STEP 1: Slide the rear accessories
over the wire bundle in the proper
sequence for re-assembly: cable
clamp and/or endbell first, then
ferrule, and coupling nut.
STEP 2: Use the proper insertion tool
from the Contact Selection Chart on
apage 94 Place the contact in the
tool. The tool should press against the
shoulder of the contact. Contact sizes
16S, 16, and 12 use a pliers-style tool.
Contact sizes 8, 4 and 0 use a tool with
a C-shaped shaft.
STEP 3: Lubricate the grommet with
isopropyl alcohol (do not use any
lubricant other than isopropyl alcohol).
Insert the contact through the appropriate
cavity in the grommet. Sizes 16S, 16 and
12 socket contacts must be installed
using guide (pilot) pins. See the Contact
Selection Guide on apage 94 for
Insertion Guide (Pilot) Pin part numbers.
STEP 4: Place the connector into an assembly
fixture (fixtures are available for production
use, contact us.) If you are not using a fixture,
be sure to allow clearance on the mating face
of the connector for the guide pins to come
through the connector during insertion.
STEP 5: Lubricate the contact cavities of the
connector insulator with isopropyl alcohol
(do not use any other type of lubricant).
STEP 6: Using guide pins where necessary,
push straight down with a firm even pressure
until the contact snaps into position in the
proper cavity. Start at the center of the
pattern and work toward the outer edges.
CONNECTOR
ASSEMBLY INSTRUCTIONS
117
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
PIN CONTACT SOCKET
CONTACT
CROSS SECTION
OF CONNECTOR
CROSS SECTION
OF CONNECTOR
SOFT JAW
PLIERS
EXTRACTION OF CONTACTS
UNCRIMPED
CONTACTS
PIN EXTRACTION END
HANDLE
LOCK RING
SOCKET
EXTRACTION END
INSERTION OF CONTACTS (CONTINUED)
STEP 7: Fill any unused cavities
with contacts.
STEP 8: Check the mating
face of the connector to ensure
that all the same size contacts
are on the same plane (fully
inserted). If not, the contact
is not fully inserted. Remove
the contact using the proper
extraction tool and procedure
and reinsert. Do not attempt
to reinsert the insertion tool to
correct the problem.
STEP 9: A wire hole filler must
be inserted into the grommet
behind the unused contacts to
maintain the sealing integrity of
the connector. See the Contact
Selection Chart on apage 94
for wire hole fillers.
STEP 10: Place the
connector back in the fixture for
re-assembly. Slide the connector
accessories back down the cable
over the rear of the connector
and tighten. Use the appropriate
endbell tools as shown on
apage 122.
STEP 1: Remove the endbell accessories and slide them back
over the wires. Use the appropriate endbell tools as shown on
apage 122.
STEP 2: Use the proper extraction tool from the Contact Selection
Chart on apage 94. The extraction tool can be used for both pin
and socket contacts by removing the shaft from the handle and
reversing it for pin or socket extraction.
STEP 3: On the mating face of the connector, insert the tool over
the pin contact or into the socket contact until the tool bottoms.
Apply a slow continuous pressure to push the contact out the rear
of the connector. When the shoulder of the tool “thunks” against
the insulator, the contact is extracted.
STEP 4: Carefully remove the extraction tool from the connector
to avoid damage to the insulator.
ASSEMBLY INSTRUCTIONS
118
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
AMPHENOL HOW-TO-ORDER GUIDE
AIB/GT SERIES CONNECTORS
MATEABILITY WITH IDENTICAL CONTACT
ARRANGEMENTS
CONNECTOR STYLE MATEABLE WITH STYLE
GT00 GT06/062/064/065/08
GT01 GT06/062/064/065/08
GT02 GT06/062/064/065/08
GT020 GT06/062/064/065/08
GT030 GT06/062/064/065/08
GT06/062/064/065 GT00/01/02/020/03/030/05/070/TB
GT07/070 GT06/062/064/065/08
GT08 GT00/01/02/020/03/030/05/070/TB
GTTB GT06/062/064/065/08
SERIES
GT Circular connectors with
bayonet coupling
SHELL SIZE & LAYOUT
See apages 72-82.
GT C 00 A 36-5 P W- (002)
CONTACT STYLE/INSERT
C = Crimp
S = Solder
CY = Crimp with Viton®*
SY = Solder with Viton®*
CL = Crimp with low-smoke/flame-
retardant inserts
SL = Solder with low-smoke/flame-
retardant inserts
SHELL STYLE
00 Wall-mount receptacle
01 Inline receptacle
02 Box-mount receptacle
020 Box-mount receptacle with accessory
threads
030 Square flange receptacle -
rear panel mount
(most popular)
05 Dummy receptacle
06 Straight plug (most popular)
062 Straight plug with deep-serrated
coupling nut
064 Panel-mounted plug with heavy-duty
coupling nut
065 Straight plug with long heavy-duty
coupling nut
07 Jam nut receptacle - rear panel mount
070 Jam nut receptacle with accessory
threads
08 90˚ angle plug
TB Thru-bulkhead
CONNECTOR SHELL VARIATIONS
Omit for standard olive drab with silver plated contacts
G96 Black anodized
014 Olive drab cadmium plate, nickel base
A24 Gold/nickel-plated contacts
023 Electroless nickel (RoHS with crimp only)
025 Black alloy (RoHS with crimp only)
027 Conductive black alloy (RoHS with crimp only)
024 Green zinc
B30 Gold
RDS Radsok power contacts 8, 4 & 0 socket contact only
116 Less pre-tinned solder cups
472 116 & 025 mod codes (RoHS)
548 116 & 023 mod codes (RoHS)
553 116 & 027 mod codes (RoHS)
ALTERNATE INSERT ROTATION
W, X, Y, and Z designate that the insert is rotated in its shell
from a normal position. No letter required for normal (no
rotation) position.
See apages 83-93.
CONTACT STYLE
P pin contacts
S socket contacts
CONNECTOR CLASS
A General-duty, threaded backshell, no cable clamp,
no grommet
AF General-duty, threaded backshell, cable clamp,
no grommet
F General-duty, threaded backshell, cable clamp,
with grommet
CF General-duty, threaded endbell, gland-seal cable
clamp, no grommet
CFZ General-duty, threaded endbell, gland-seal cable
clamp, with grommet
G One-piece, heat shrink endbell adaptor, with grommet
(use with heat shrink boot – see Accessories).
apages 440-441
G2 Two-piece, heat shrink endbell adaptor, with grommet
(use with heat shrink boot – see Accessories).
apages 440-441
LC Long-threaded backshell, gland-seal cable clamp,
with grommet, and basket-weave cord grip
(please call with cable O.D.)
LCF Long-threaded endbell, gland-seal cable clamp,
no grommet
LCFZ Long-threaded endbell, gland-seal cable clamp,
with grommet
R General-duty, threaded backshell, no cable clamp,
with grommet
RV General-duty, short backshell, with grommet
(may be used with heat shrink boot – see
Accessories).
apages 440-441
CFGG General-duty, threaded endbell, gland-seal cable
clamp, no grommet, rubber-covered coupling nut
(shell styles 06 and 08 only)
PP Panel plug, only for shell styles 06 and 064
LT Long back shell for metal core conduit, with grommet
(please call with conduit O.D.)
PFC For plastic, flexible conduit (please call with conduit
O.D.) asee pages 445
SL Long backshell for use with PG gland-seal style cord
grip (please call with cable O.D.)
*Viton® is a registered trademark of DuPont DOW Elastomers
119
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
AMPHENOL HOW-TO-ORDER GUIDE
AIBC/ACA-B SERIES CONNECTORS
SERIES
ACA Circular Connector Family
SHELL STYLES
3100 - Wall-mount receptacle with
rear accessory threads for front
mounting through holes in flange
3101 - Cable-connecting receptacle with
rear accessory threads
3102 - Front-mount box receptacle no
rear accessory threads through
holes in flange
3103 - Rear-mount box receptacle with
rear accessory threads through
holes in flange
3106 - Plug straight
3107A - Jam nut receptacle rear mount,
no rear accessory threads
3108 - Plug with 90 degree endbell
CONNECTOR CLASS
E Environmental with resilient insulator
and endbell with clamp and bushing
F Environmental with resilient insulator
and endbell with rear accessory
threads
G Two-piece backshell for heat shrink
boots
R Environmental with resilient insulator
and shortened lightweight endbell
without cable clamp
SHELL SIZE
10SL, 14S, 16S, 16, 18, 20, 22, 24, 28, 32,
and 36
CONNECTOR MODIFICATION
01 - Metric crimp contacts
116 - Less solder filled contacts
F80 - AWG crimp contacts
A176 - Gold-plated contacts
A23 - Electroless nickel plating shells
A232 - Black zinc cobalt-plated shells
F42 - Less grommet, endbell &
sleeve (ferrule)
F0 - Less contacts (ordered
separately)
RFI - Grounding spring on barrel
(3106 & 3108)
T00 - Metric threaded holes in flange
(3100, 3102, 3103 only)
Contact us for other modifications
REVERSE BAYONET COUPLING
ALTERNATE ROTATION
W, X, Y, and Z
No suffix required for normal position
aSee pages 83-93 for valid alternate
insert position (rotation)
CONTACT TYPE
P - Pin
S - Socket
CONNECTOR ARRANGEMENT
aSee pages 72-82 for layouts by
number of contacts
ACA 3106 E 18 1 S X B - F80
To more easily illustrate ordering procedure, part number ACA3106E181SXB-F80 is shown as follows:
Use the AIB/GT Series part numbering system on
apages 70-71 whenever possible.
MATEABILITY WITH IDENTICAL CONTACT ARRANGEMENTS
CONNECTOR STYLE MATEABLE WITH STYLE
ACA 3100 ACA3106/ ACA3108
ACA 3101 ACA3106/ ACA3108
ACA 3102 ACA3106/ ACA3108
ACA 3103 ACA3106/ ACA3108
ACA 3105 ACA3106/ ACA3108
ACA 3106 ACA3101/ ACA3102/ ACA3103
ACA 3108 ACA3101/ ACA3102/ ACA3103
120
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
AMPHENOL HOW TO ORDER GUIDE
VG95234 NATO SPECIFICATIONS
SHELL STYLE
See chart below
VG95234- A 20-29 P 1 N
SHELL SIZE - LAYOUT
a See pages 72-82.
PLUGS
D Straight plug with cable clamp
E Right angle plug with cable clamp
E1 Right angle plug for conduit termination
G Straight plug with heat shrink endbell
H Straight plug for conduit termination
K Right angle plug for conduit termination with grounding fingers
L Straight plug for conduit termination with grounding fingers
M Straight plug with shielded heat shrink endbell and grounding fingers
R1 Straight plug with shielded heat shrink endbell and grounding fingers
T Straight plug with heat shrink endbell and grounding fingers
RECEPTACLES
A Front panel mount box receptacle
B1 Rear panel mount box receptacle, metric mounting holes
B2 Rear panel mount box receptacle, through mounting holes
F In-line receptacle with cable clamp
J1 Rear panel mount wall receptacle with cable clamp, metric mounting holes
J2 Rear panel mount wall receptacle with cable clamp, through mounting holes
N1 Rear panel mount wall receptacle with shielded heat shrink endbell, metric mounting holes
N2 Rear panel mount wall receptacle with shielded heat shrink endbell, through mounting holes
S1 Rear panel mount wall receptacle with heat shrink endbell, metric mounting holes
S2 Rear panel mount wall receptacle with heat shrink endbell, through mounting holes
U1 Rear panel mount wall receptacle with heat shrink endbell, metric mounting holes
U2 Rear panel mount wall receptacle with heat shrink endbell, through mounting holes
V In-Line receptacle with conduit termination
CONTACT STYLE
P = Pin contacts
S = Socket contacts
TERMINATION
1 = AWG crimp
Blank = metric crimp
POLARIZATION
a See pages 83-93.
SHELL STYLE
Mates
with
VG SPEC PREFIX
121
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
AMPHENOL HOW TO ORDER GUIDE
VG95234 SHELL STYLES
VG95234 STYLE F VG95234 STYLE G VG95234 STYLE H VG95234 STYLE J1/J2
VG95234 STYLE R1 VG95234 STYLE S1/S2 VG95234 STYLE T VG95234 STYLE U1/U2
VG95234 STYLE A VG95234 STYLE B1/B2 VG95234 STYLE D VG95234 STYLE E
VG95234 STYLE K VG95234 STYLE L VG95234 STYLE M VG95234 STYLE N1/N2
122
5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015
For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com
CONNECTOR TOOLS
TG70 STRAP WRENCH
The strap wrench is used to
connect or disconnect coupling
nuts in a confined space, or to
tighten or loosen endbells
without damaging the
connector plating. A strap
wrench also increases torque,
allowing you to more easily
mate or unmate a connector
pair. Substitute tools, such as a pipe wrench or pliers, should
never be used because of the high probability of severe damage
to the connector plating or the coupling mechanism.
TG69P NON-MARRING ADJUSTABLE
ENDBELL PLIERS FOR FIELD SERVICE
The TG69P pliers
have resilient jaws and
are used to tighten
or remove endbells
without damaging the
connector plating. The
pliers are adjustable and will accommodate all of the connector
sizes in this catalog. Substitute tools, such as a pipe wrench or
metal jaw pliers, should never be used due to the high probability
of severe damage to the connector plating. Replacement jaws,
Part No. G77015, are available.
600B005-R 600B005-P
The 600 Series is a complete system for the proper assembly and torquing of connector
endbells. The system includes a bench-mounted or hand-held torque wrench, plug and
receptacle holders, and a range of endbell tightening tools. When used together, these tools
provide the user with consistent endbell installations. Each item is shipped with detailed
assembly instructions.
MIL-DTL-5015
FOR AIT/MS & AIB/GT
RECEPTACLES PLUGS
8/8S 600B005-8R 600B005-8P
10S/SL 600B005-10R 600B005-10P
12/12S 600B005-12R 600B005-12P
14/14S 600B005-14R 600B005-14P
16/16S 600B005-16R 600B005-16P
18 600B005-18R 600B005-18P
20 600B005-20R 600B005-20P
22 600B005-22R 600B005-22P
24 600B005-24R 600B005-24P
28 600B005-28R 600B005-28P
32 600B005-32R 600B005-32P
36 600B005-36R 600B005-36P
TORQUE VALUES
IMPORTANT NOTE:
If barrel/shell has three threads or less, torque to 30 to 35 inch/Lbs (3.4 to
4.0 NM) per L-725-2.
10SL 26
14S 44
16 50
16S 50
18 55
20 65
22 85
24 90
28 114
32 120
36 153
40 170
SIZE IN./LB. MAX.
Plug and
Receptacle Holders
SIZE
600-007
Bench-mounted
torque wrench
600-004
Hand-held
torque wrench
W = G W = H
X = I X = J
Y = K Y = L
Z = M Z = N
ROTATIONS
PIN SOCKET
